ASTM F 2511 : 2005 : R2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
Hardcopy , PDF
02-28-2022
English
06-03-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 01.09, 2018 Defines the procurement requirements for solid ferrous needle bearing rollers including the MS19065 spherical ended solid ferrous needle rollers as specified in Specification F 2443.
| Committee |
F 34
|
| DevelopmentNote |
Supersedes MIL R 22440. (05/2007)
|
| DocumentType |
Standard
|
| Pages |
6
|
| ProductNote |
Reconfirmed 2013
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers the procurement requirements for solid ferrous needle bearing rollers including the MS19065 spherical ended solid ferrous needle rollers as specified in Specification F2443.
1.2Intended Use—The rollers covered in this specification are intended for use in bearings and bearing applications.
1.3This specification contains many of the requirements of MIL-R-22440, which was originally developed by the Department of Defense and maintained by the Defense Supply Center in Richmond. The following government activity codes may be found in the Department of Defense, Standardization Directory SD-1.2
| Preparing Activity | Custodians | Review Activities |
| DLA-GS4 | Army-AT | Army-CR4 |
| Navy-OS | Air Force-84 | |
| Air Force-99 | ||
| DLA-GS4 |
| ASTM D 3953 : 2006 | Standard Specification for Strapping, Flat Steel and Seal |
| ASTM D 5168 : 2012 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
| ASTM A 295/A295M : 2014 : REDLINE | Standard Specification for High-Carbon Anti-Friction Bearing Steel |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| SAE J 418 : 1992 | GRAIN SIZE DETERMINATION OF STEELS |
| ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| ASTM F 2443 : 2004 : R2012 | Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End |
| ASTM D 3953 : 2007 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM F 2443 : 2004 : R2021 | Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM D 3953 : 1991 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 3953 : 2012 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3953 : 2015 | Standard Specification for Strapping, Flat Steel and Seals |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ISO 5593:1997 | Rolling bearings Vocabulary |
| ASTM D 5168 : 2003 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM F 2443 : 2004 | Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| ASTM D 3953 : 2005 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| MIL-PRF-131 Revision K:2005 | BARRIER MATERIALS, WATERVAPORPROOF, GREASEPROOF, FLEXIBLE, HEAT-SEALABLE |
| MIL-PRF-121 Revision G:2001 | BARRIER MATERIALS, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM A 751 : 2021 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| SAE AMSSTD66 | Steel: Chemical Composition and Hardenability |
| ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 3953 : 2007 : REV A | Standard Specification for Strapping, Flat Steel and Seals |
| MIL-PRF-22191 Revision F:2008 | Barrier Materials, Transparent, Flexible, Heat-Sealable |
| ASTM A 751 : 2020 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM E 381 : 2017 : REDLINE | Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
| ASTM D 6251/D6251M : 2011 : REDLINE | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
| ASTM E 384 : 2017 | Standard Test Method for Microindentation Hardness of Materials |
| ASTM D 3953 : 2002 | Standard Specification for Strapping, Flat Steel and Seals |
| MIL-R-22440 Base Document:1960 | ROLLER, BEARING, NEEDLE, FERROUS, SOLID |
| ASTM D 3953 : 2013 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 5168 : 1998 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
| ASTM D 5168 : 2009 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 3953 : 1997 | Standard Specification for Strapping, Flat Steel and Seals |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.