ASTM F 25 : 2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
Hardcopy , PDF
11-11-2014
English
09-01-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 15.03, 2006 Provides for counting and sizing airborne particulate matter 5 micrometer and larger. Sampling areas are those with contamination levels typical of cleanrooms (white and gray rooms) and dust-controlled areas designed for electronic work.
| Committee |
E 21
|
| DocumentType |
Test Method
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method covers counting and sizing airborne particulate matter 5 m and larger (macroparticles). The sampling areas are specifically those with contamination levels typical of cleanrooms and dust-controlled areas.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
| MIL-STD-1246 Revision C:1994 | PRODUCT CLEANLINESS LEVELS AND CONTAMINATION CONTROL PROGRAM |
| ASTM F 841 : 1984 : R1998 | Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels |
| ASTM F 51 : 2000 : R2002 : EDT 1 | Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments |
| ASTM E 2217 : 2012 : REDLINE | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM F 51 : 2000 | Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments |
| ASTM F 841 : 1984 : R2006 | Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels |
| SAE AS 81934 : 2016 | BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
| MIL-B-85598 Base Document:1988 | BEARINGS, ELASTOMERIC GENERAL SPECIFICATION FOR |
| ASTM E 2090 : 2012 : REDLINE | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy |
| ASTM E 2352 : 2019 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations |
| ASTM E 2042 : 2004 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| ASTM E 2352 : 2004 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
| ASTM E 2042/E2042M : 2009 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| ASTM F 51 : 2000 : R2007 | Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments |
| MIL-B-81820 Revision F:1994 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION, GENERAL SPECIFICATION FOR |
| MIL-B-81819 Revision B:1987 | BEARING, PLAIN, (SLIDING SPHERICAL, SLEEVE & THRUST) SELF LUBRICATING, HIGH SPEED OSCILLATION, GENERAL SPECIFICATION FOR |
| ASTM F 318 : 2006 | Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids |
| ISA TR52.00.01 : 2006 | RECOMMENDED ENVIRONMENTS FOR STANDARDS LABORATORIES |
| ASTM F 841 : 1984 : R2011 | Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels |
| ASTM F 51/F51M : 2000 : R2007 : EDT 1 | Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments |
| ASTM F 51/F51M : 2000 | TEST METHOD FOR SIZING AND COUNTING PARTICULATE CONTAMINANT IN AND ON CLEAN ROOM GARMENTS |
| NASA KSC STD Z 0010 : 1983 | DESIGN OF ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS, AND GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA MSFC STD 246 : 2011 | STANDARD DESIGN AND OPERATIONAL CRITERIA FOR CONTROLLED ENVIRONMENTAL AREAS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| SAE AS 81819 : 2010 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
| ASTM E 2042/E2042M : 2009 : R2016 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| MIL-B-81934 Revision B:1991 | BEARING, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING |
| MIL-STD-750-5 Base Document:2012 | HIGH RELIABILITY SPACE APPLICATION TEST METHODS FOR SEMICONDUCTOR DEVICES - PART 5: TEST METHODS 5000 THROUGH 5999 |
| NASA MSFC PROC 1721 : 1989 | TAPE LIFT PARTICLE COUNTING PROCEDURE |
| SAE AS 81820 : 2014 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
| ASTM F 51/F51M : 2000 : R2014 : EDT 1 | Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments |
| ASTM E 2312 : 2011 : REDLINE | PRACTICE FOR TESTS OF CLEANROOM MATERIALS |
| ASTM E 2352 : 2004 : R2010 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
| SAE ARP 743 : 2001 | PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF AIR IN DUST CONTROLLED SPACES BY THE PARTICLE COUNT METHOD |
| IEST G CC1003 : 1999 | MEASUREMENT OF AIRBORNE MACROPARTICLES |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.