ASTM F 2480 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for In-ground Concrete Skatepark
Hardcopy , PDF
08-10-2024
English
04-01-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
F 08
|
| DocumentType |
Guide
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide covers safety and performance guidelines pertaining to in-ground skatepark facilities built primarily out of concrete and other designed materials. This guide pertains to any concrete materials and other designed materials intended to be used in the performance of the sports including skateboarding, inline skating and BMX biking. Items such as fencing, lighting, and operational structures are not intended to be a part of this guide.
1.2Tolerance: General Measures, Tolerances, and Conversions—General dimensional tolerances for this guide (unless otherwise noted) follow. These tolerances still apply to a dimension even when terms like greater than, less than, minimum, or maximum are used.
| Dimension | Tolerance |
| X in. or ft | ±0.5 in. |
| X.X in. | ±0.05 in. |
| X.XX in. | ±0.005 in. |
1.3The values stated in inch-pound units are to be regarded as standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 2334 : 2018 | Standard Guide for Above Ground Public Use Skatepark Facilities |
| ASTM A 615/A615M : 2020 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| ASTM C 125 : 2021 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM A 616/A616M : 1996 : REV A | Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999) |
| ASTM E 1155 : 1996 | Standard Test Method for Determining <i>F<sub>F</sub></i> Floor Flatness and <i>F<sub>L</sub></i> Floor Levelness Numbers |
| ASTM C 94/C94M : 2020 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 494/C494M : 2019 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM A 615/A615M : 2024 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| ASTM C 494/C494M : 2019 : EDT 1 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 94/C94M : 2021 : REV B | Standard Specification for Ready-Mixed Concrete |
| ASTM E 1155 : 2020 | Standard Test Method for Determining <emph type="ital">F<inf>F</inf></emph> Floor Flatness and <emph type="ital">F<inf>L</inf></emph> Floor Levelness Numbers |
| ASTM A 617/A617M : 1996 : REV A | Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999) |
| ASTM C 1141 : 1995 | Standard Specification for Admixtures for Shotcrete |
| ASTM C 125 : 2000 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM C 94/C94M : 2021 : REV A | Standard Specification for Ready-Mixed Concrete |
| ASTM A 615/A615M : 2022 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| ASTM C 1116 : 2000 | Standard Specification for Fiber-Reinforced Concrete and Shotcrete |
| ASTM C 94/C94M : 2022 : REV A | Standard Specification for Ready-Mixed Concrete |
| ASTM A 184/A184M : 2024 | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
| ASTM C 1436 : 2013 | Standard Specification for Materials for Shotcrete (Withdrawn 2022) |
| ASTM C 94/C94M : 2024 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 94/C94M : 2024 : REV A | Standard Specification for Ready-Mixed Concrete |
| ASTM C 94/C94M : 2021 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 125 : 2021 : REV A | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM A 184/A184M : 2019 | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
| ASTM C 494/C494M : 2010 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 94/C94M : 2022 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 1480 : 2000 | Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application |
| ASTM C 33 : 1985 | Standard Specification for Concrete Aggregates |
| ASTM C 125 : 2020 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM A 184/A184M : 1996 | Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement |
| ASTM C 150 : 2002 : REV A : EDT 1 | Standard Specification for Portland Cement |
| ASTM C 1436 : 1999 | Standard Specification for Materials for Shotcrete |
| ASTM C 94/C94M : 2023 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 125 : 2009 | Standard Terminology Relating to Concrete and Concrete Aggregates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.