ASTM F 1718 : 2001 : R2019
Current
Current
The latest, up-to-date edition.
Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
05-01-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 01.07, 2017 Defines the requirements applicable to the design and construction of rotary positive displacement distillate fuel pumps for shipboard use.
| Committee |
F 25
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers the requirements applicable to the design and construction of rotary positive displacement distillate fuel pumps for shipboard use.
1.2Lineal dimensions and units of force in this specification are expressed as inches and pounds respectively. A companion metric standard is in the process of preparation.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2000 : 2003 : REV A : EDT 1 | Standard Classification System for Rubber Products in Automotive Applications |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| ASTM D 2000 : 2001 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM F 1511 : 2018 : R2023 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
| ASTM A 240/A240M : 2024 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 582/A582M : 2021 | Standard Specification for Free-Machining Stainless Steel Bars |
| ASTM F 467 : 2024 | Standard Specification for Nonferrous Nuts for General Use |
| ASTM A 53/A53M : 2020 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A 312/A312M : 2021 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM F 1511 : 2011 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM A 193/A193M : 2024 : REV A | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM B 584 : 2014 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM D 1418 : 2010 : REV A : R2016 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM F 1511 : 2004 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| SAE AMS 5894 : 2016 | COBALT ALLOYS, BARS, SHEET, AND PLATE, 60CO - 28CR - 4.5W - 1.15C, SOLUTION HEAT TREATED |
| ASTM A 564/A564M : 2019 : REV A | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SAE AMS 4677 : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
| ASTM A 53/A53M : 2024 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A 240/A240M : 2011 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 312/A312M : 2022 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A 194/A194M : 2020 : REV A | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| MIL-STD-740-1 Base Document:1986 | AIRBORNE SOUND MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ASTM B 584 : 2022 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM B 209 : 2014 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM D 2000 : 2000 : EDT 1 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM D 1418 : 1999 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM A 193/A193M : 2022 : REV A | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM A 743/A743M : 2021 | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
| ASTM D 2000 : 2003 : REV A | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM F 593 : 2017 : REDLINE | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| SAE AMS 4676 : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
| ASTM A 312/A312M : 2019 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM F 1511 : 2014 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM A 240/A240M : 2005 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM F 1511 : 2005 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM F 1511 : 2006 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM F 594 : 2022 | Standard Specification for Stainless Steel Nuts |
| ASTM F 1511 : 1998 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM A 582/A582M : 2022 | Standard Specification for Free-Machining Stainless Steel Bars |
| ASTM D 1418 : 2006 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM B 221 : 2020 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM B 505/B505M : 2022 | Standard Specification for Copper Alloy Continuous Castings |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM F 1511 : 2013 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM A 194/A194M : 2024 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ASTM A 193/A193M : 2022 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM B 148 : 2018 | Standard Specification for Aluminum-Bronze Sand Castings |
| ASTM D 1418 : 2010 : REV A | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| SAE AMS 3215 : 2012 | ACRYLONITRILE BUTADIENE (NBR) RUBBER - AROMATIC FUEL RESISTANT - 65-75 |
| ASTM F 594 : 2024 | Standard Specification for Stainless Steel Nuts |
| ASTM F 880 : 2012 : R2017 | Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws |
| ASTM A 312/A312M : 2024 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A 193/A193M : 2004 : REV B | Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service |
| ASTM A 194/A194M : 2023 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM D 1418 : 2017 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM F 468 : 2016 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
| ASTM A 574 : 2017 | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASTM A 240/A240M : 2022 : REV B | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM F 880 : 2024 | Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws |
| ASTM F 593 : 2022 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM A 106/A106M : 2019 : REV A | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
| ASTM F 468 : 2023 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
| ASTM F 594 : 2009 : R2020 | Standard Specification for Stainless Steel Nuts |
| ASTM D 3951 : 2018 : R2023 | Standard Practice for Commercial Packaging |
| MIL-STD-740-2 Base Document:1986 | STRUCTURE BORNE VIBRATORY ACCELERATION MEASUREMENTS ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ASTM A 582/A582M : 2012 : R2017 | Standard Specification for Free-Machining Stainless Steel Bars |
| ASTM D 2000 : 2008 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM D 2000 : 2006 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM B 148 : 2024 | Standard Specification for Aluminum-Bronze Sand Castings |
| ASTM A 240/A240M : 2023 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 240/A240M : 2022 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM F 593 : 2017 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| ASTM A 193/A193M : 2023 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM D 1418 : 2021 : REV A | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM D 2000 : 2006 : REV A | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM A 743/A743M : 2019 | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
| ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
| ASTM F 1511 : 2002 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM D 2000 : 2005 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM A 312/A312M : 2024 : REV B | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM D 2000 : 2018 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM F 1511 : 2009 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM F 593 : 2024 | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| ASTM B 584 : 2014 : R2022 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM A 563 : 2015 | Standard Specification for Carbon and Alloy Steel Nuts |
| ASTM A 312/A312M : 2024 : REV A | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM D 2000 : 2006 : REV A : EDT 1 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM F 1511 : 2003 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM D 1418 : 2001 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM A 240/A240M : 2024 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 747/A747M : 2018 | Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
| ASTM F 467 : 2013 : R2018 | Standard Specification for Nonferrous Nuts for General Use |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM D 2000 : 2012 : R2017 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM A 194/A194M : 2022 | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASTM B 505/B505M : 2005 | Standard Specification for Copper-Base Alloy Continuous Castings |
| ASTM D 1418 : 2010 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM A 194/A194M : 2022 : REV A | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ASTM A 240/A240M : 2022 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 449 : 2014 : REDLINE | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| ASTM F 104 : 2011 : REDLINE | Standard Classification System for Nonmetallic Gasket Materials |
| ASTM A 240/A240M : 2020 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM F 1511 : 2016 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM A 574 : 2021 | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASTM D 1418 : 2001 : REV A | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 1418 : 2005 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 1418 : 2022 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM F 880 : 2012 : R2024 | Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws |
| ASTM A 747/A747M : 2023 | Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
| ASTM F 1511 : 2018 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM A 36/A36M : 2019 | Standard Specification for Carbon Structural Steel |
| ASTM B 505/B505M : 2018 | Standard Specification for Copper Alloy Continuous Castings |
| ASTM A 582/A582M : 1995 : REV B | Standard Specification for Free-Machining Stainless Steel Bars |
| ASTM A 574 : 2017 : REDLINE | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| ASTM A 193/A193M : 2024 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM A 312/A312M : 2022 : REV A | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| ASTM D 2000 : 2004 | Standard Classification System for Rubber Products in Automotive Applications |
| AGMA 390.03 : 1980 | GEAR CLASSIFICATION, MATERIALS AND MEASURING METHODS FOR UNASSEMBLED GEARS |
| ASTM A 53/A53M : 2022 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM B 505/B505M : 2023 | Standard Specification for Copper Alloy Continuous Castings |
| ASTM A 193/A193M : 2020 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM F 468 : 2022 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
| ASTM A 240/A240M : 2023 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 2000 : 2012 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM D 2000 : 2003 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM A 53/A53M : 2018 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM D 2000 : 2000 | Standard Classification System for Rubber Products in Automotive Applications |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| ASTM F 912 : 2011 : R2017 | Standard Specification for Alloy Steel Socket Set Screws |
| ASTM B 221 : 2002 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| HI 3.6 : 2016 | ROTARY PUMP TESTS |
| MIL N 25027 : G | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM D 1418 : 2021 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM F 1511 : 2007 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| ASTM B 221 : 2021 | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.