ASTM F 1494 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Protective Clothing
Available format(s)
Hardcopy , PDF
Superseded date
01-27-2023
Superseded by
Language(s)
English
Published date
11-11-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
F 23
|
| DocumentType |
Reference Material
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This standard defines the specialized terms used in standards developed by Committee F23 on Protective Clothing.
1.2Definitions of Terms, which were drafted for use only in a single standard, are also included for convenient reference. Under ASTM rules they may become full definitions in the future, if they are used in additional standards.
1.3Additional terminology relevant to protective clothing and to the components of protective clothing can be found in Terminology D123, D1566, and D4805.
| ASTM F 2703 : 2021 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Burn Injury Prediction |
| ASTM F 2757 : 2020 | Standard Guide for Home Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing |
| ASTM F 739 : 2020 | Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Continuous Contact |
| ASTM F 1939 : 2015 : R2020 | Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating |
| ASTM F 1790/F1790M : 2015 : R2021 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment |
| ASTM E 3276/E3276M : 2021 | Standard Test Method for Assessing Impact Energy and Precision of Direct-fire, Single-projectile Less Lethal Impact Rounds Used by Public Safety Officers |
| ASTM F 2100 : 2021 | Standard Specification for Performance of Materials Used in Medical Face Masks |
| ASTM F 2178/F2178M : 2022 | Standard Specification for Arc Rated Eye or Face Protective Products |
| ASTM F 3050 : 2022 : REV A | Standard Guide for Conformity Assessment of Personal Protective Clothing and Equipment |
| ASTM F 2675/F2675M : 2022 : EDT 1 | Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection |
| ASTM F 3094 : 2014 : R2022 | Standard Test Method for Determining Protection Provided By X-ray Shielding Garments Used in Medical X-ray Fluoroscopy from Sources of Scattered X-Rays |
| ASTM E 2875/E2875M : 2012 : R2021 | Standard Guide for Personal Protective Equipment for the Handling of Flat Glass |
| ASTM F 3352/F3352M : 2022 | Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
| ASTM F 3031 : 2017 : R2022 | Standard Practice for Range of Motion Evaluation of First Responder’s Protective Ensembles |
| ASTM F 2700 : 2008 : R2020 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Continuous Heating |
| ASTM F 1358/F1358M : 2020 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 2961 : 2022 | Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter |
| ASTM F 3538 : 2022 | Standard Test Method for Measuring Heat Transmission Through Flame-Resistant Materials for Clothing in Flame Exposure Using a Cylindrical Specimen Holder |
| ASTM F 3267 : 2022 | Standard Specification for Protective Clothing for Use Against Liquid Chemotherapy and Other Liquid Hazardous Drugs |
| ASTM F 1383 : 2020 | Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Intermittent Contact |
| ASTM F 3502 : 2022 : REV A | Standard Specification for Barrier Face Coverings |
| ASTM F 2621/F2621M : 2022 | Standard Practice for Evaluating Response Characteristics of Safety Products in an Electric Arc Exposure |
| ASTM F 2407/F2407M : 2022 : REV A | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| ASTM F 1959/F1959M : 2022 | Standard Test Method for Determining the Arc Rating of Materials for Clothing |
| ASTM F 2588 : 2012 : R2020 | Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles |
| ASTM F 2702 : 2015 | Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction (Withdrawn 2020) |
| ASTM F 3094 : 2014 | Standard Test Method for Determining Protection Provided by X-ray Shielding Garments Used in Medical X-ray Fluoroscopy from Sources of Scattered X-Rays |
| ASTM F 2407 : 2006 : R2013 : EDT 1 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| ASTM F 2704 : 2017 : REV A | Standard Specification for Air-Fed Protective Ensembles |
| ASTM F 2010/F2010M : 2018 | Standard Test Method for Evaluation of Glove Effects on Wearer Finger Dexterity Using a Modified Pegboard Test |
| ASTM F 1819 : 2019 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| ASTM F 739 : 2012 : EDT 1 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact |
| ASTM F 2101 : 2019 | Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <emph type="ital" >Staphylococcus aureus</emph> |
| ASTM F 2302 : 2019 | Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame |
| ASTM F 1060 : 2018 | Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR) |
| ASTM E 3108 : 2018 | Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers |
| ASTM F 2668 : 2016 | Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles |
| ASTM F 1449 : 2008 : R2015 | Standard Guide for Industrial Laundering of Flame, Thermal, and Arc Resistant Clothing |
| ASTM F 1790/F1790M : 2015 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment |
| ASTM D 1518 : 2014 | Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate (Withdrawn 2023) |
| ASTM F 2130 : 2011 : R2018 | Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials (Withdrawn 2023) |
| ASTM F 1383 : 2012 : EDT 1 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM E 2875/E2875M : 2012 | Standard Guide for Personal Protective Equipment for the Handling of Flat Glass |
| ASTM E 1542 : 2018 | Standard Terminology Relating to Occupational Health and Safety |
| ASTM F 2621/F2621M : 2019 | Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products and Evaluating other Products in an Electric Arc Exposure |
| ASTM F 1461 : 2017 | Standard Practice for Chemical Protective Clothing Program |
| ASTM F 3352 : 2019 | Standard Specification for Isolation Gowns Intended for Use in Healthcare Facilities |
| ASTM E 2771 : 2011 : R2019 | Standard Terminology for Homeland Security Applications |
| ASTM F 3324 : 2019 | Standard Test Method for Measurement of Cut Resistance to Chainsaw in Leg-Protective Devices |
| ASTM F 2731 : 2018 | Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems |
| ASTM F 1862/F1862M : 2017 | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| ASTM F 2675/F2675M : 2019 | Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection |
| ASTM F 1002 : 2015 | Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ASTM F 1958/F1958M : 2012 | Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins (Withdrawn 2021) |
| ASTM F 2992/F2992M : 2015 | Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment |
| ASTM F 1458 : 2015 | Standard Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices |
| ASTM F 1358 : 2016 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 2815 : 2010 : R2014 | Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program (Withdrawn 2019) |
| ASTM F 2371 : 2016 | Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin |
| ASTM F 2700 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating |
| ASTM F 1001 : 2012 : R2017 | Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials |
| ASTM F 1868 : 2017 | Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate |
| ASTM F 2962 : 2013 | Standard Practice for Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides (Withdrawn 2019) |
| ASTM F 1959/F1959M : 2014 : EDT 1 | Standard Test Method for Determining the Arc Rating of Materials for Clothing |
| ASTM F 2299/F2299M : 2003 : R2017 | Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres |
| ASTM F 3050 : 2017 | Standard Guide for Conformity Assessment of Personal Protective Clothing and Equipment |
| ASTM F 2757 : 2009 : R2016 | Standard Guide for Home Laundering Care and Maintenance of Flame, Thermal and Arc Resistant Clothing |
| ASTM F 1296 : 2008 : R2015 | Standard Guide for Evaluating Chemical Protective Clothing |
| ASTM F 2894 : 2019 | Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
| ASTM F 1414 : 2019 | Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing |
| ASTM F 2300 : 2010 : R2016 | Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing |
| ASTM F 2178 : 2017 : REV B | Standard Test Method for Determining the Arc Rating and Standard Specification for Eye or Face Protective Products |
| ASTM F 2061 : 2017 | Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions |
| ASTM F 1930 : 2018 | Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin |
| ASTM F 3031 : 2017 | Standard Practice for Range of Motion Evaluation of First Responder’s Protective Ensembles |
| ASTM F 1939 : 2015 | Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating |
| ASTM F 2961 : 2015 | Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter |
| ASTM F 2588 : 2012 | Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles |
| ASTM F 2733 : 2017 | Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards |
| ASTM F 2547 : 2018 | Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment |
| ASTM F 955 : 2015 | Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances |
| ASTM F 2703 : 2008 : R2013 | Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction |
| ASTM F 1818 : 2004 | Standard Specification for Foot Protection for Chain Saw Users |
| ASTM D 1566 : 2004 : REV A | Standard Terminology Relating to Rubber |
| ASTM F 2300 : 2004 : REV A | Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing |
| ASTM D 1566 : 2009 | Standard Terminology Relating to Rubber |
| ASTM F 1060 : 2001 | Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact |
| ASTM D 1566 : 2006 | Standard Terminology Relating to Rubber |
| ASTM F 1002 : 2015 | Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ASTM D 1566 : 2008 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
| ASTM F 1671 : 1997 : REV B | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| ASTM F 1154 : 1999 : REV A : R2004 | Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles |
| ASTM F 2300 : 2010 : R2016 | Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing |
| ASTM F 1383 : 2012 : EDT 1 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM F 1731 : 1996 : R2002 | Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing |
| ASTM F 2061 : 2007 | Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions |
| ASTM F 955 : 2015 : R2021 | Standard Test Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact with Molten Substances |
| ASTM F 1494 : 2013 | Standard Terminology Relating to Protective Clothing |
| ASTM F 1461 : 1993 : R2005 : EDT 1 | Standard Practice for Chemical Protective Clothing Program |
| ASTM F 1414 : 2004 | Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing |
| ASTM F 1414 : 2013 | Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing |
| ASTM F 2669 : 2012 | Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides |
| ASTM D 1566 : 2005 | Standard Terminology Relating to Rubber |
| ASTM F 2101 : 2001 | Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <i>Staphylococcus aureus</i> |
| ASTM F 2061 : 2008 | Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions |
| ASTM F 2733 : 2021 | Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards |
| ASTM D 1566 : 2002 : REV A | Standard Terminology Relating to Rubber |
| ASTM F 1383 : 2011 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM F 1862 : 2000 : REV A | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| ASTM F 1291 : 1999 | Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
| ASTM F 1494 : 2003 | Standard Terminology Relating to Protective Clothing |
| ASTM F 1407 : 2011 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method |
| ASTM D 1566 : 2007 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
| ASTM F 1818 : 1997 | Standard Specification for Foot Protection for Chain Saw Users |
| ASTM D 1566 : 2015 | Standard Terminology Relating to Rubber |
| ASTM F 1818 : 2013 | Standard Specification for Foot Protection for Chain Saw Users |
| ASTM F 1449 : 1992 : R2000 : EDT 1 | Standard Guide for Care and Maintenance of Flame, Thermally and Arc Resistant Clothing |
| ASTM F 2101 : 2022 | Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <emph type="ital" >Staphylococcus aureus</emph> |
| ASTM D 1566 : 2008 | Standard Terminology Relating to Rubber |
| ASTM F 2300 : 2010 : R2022 | Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing |
| ASTM F 1461 : 2007 | Standard Practice for Chemical Protective Clothing Program |
| ASTM F 1731 : 1996 : R2013 | Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing |
| ASTM F 1383 : 1999 : REV A | Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Intermittent Contact |
| ASTM F 1407 : 2012 : R2017 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
| ASTM F 2302 : 2020 | Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame |
| ASTM F 1359 : 1999 : REV A : R2004 | Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin |
| ASTM F 2407 : 2020 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| ASTM F 2669 : 2009 | Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides |
| ASTM D 1566 : 2005 : REV A | Standard Terminology Relating to Rubber |
| ASTM F 1897 : 1998 | Standard Specification for Leg Protection for Chain Saw Users |
| ASTM F 2302 : 2008 | Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant (Withdrawn 2017) |
| ASTM F 2894 : 2021 | Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
| ASTM F 2668 : 2007 | Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles |
| ASTM F 1897 : 2008 | Standard Specification for Leg Protection for Chain Saw Users |
| ASTM F 1458 : 2015 : R2022 | Standard Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices |
| ASTM F 1002 : 2005 | Standard Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ASTM D 4805 : 1988 : R1994 : EDT 1 | Standard Terminology for Plastics Standards (Withdrawn 2002) |
| ASTM F 1414 : 2019 | Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing |
| ASTM F 1449 : 2008 | Standard Guide for Industrial Laundering of Flame, Thermal, and Arc Resistant Clothing |
| ASTM F 1291 : 2004 | Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
| ASTM F 1407 : 1999 : REV A : R2006 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method |
| ASTM F 1358 : 2016 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 2668 : 2016 : R2022 | Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles |
| ASTM F 1819 : 2003 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| ASTM F 1002 : 1996 | Standard Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ASTM D 1566 : 2006 : REV A | Standard Terminology Relating to Rubber |
| ASTM F 1383 : 2007 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM F 1414 : 1999 | Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing |
| ASTM F 2300 : 2005 | Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing |
| ASTM F 2302 : 2019 | Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame |
| ASTM D 1566 : 2003 : REV A | Standard Terminology Relating to Rubber |
| ASTM F 1897 : 2020 | Standard Specification for Leg Protection for Chain Saw Users |
| ASTM F 1449 : 2008 : R2015 | Standard Guide for Industrial Laundering of Flame, Thermal, and Arc Resistant Clothing |
| ASTM F 1670 : 2008 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| ASTM F 2101 : 2014 | Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <emph type="ital" >Staphylococcus aureus</emph> |
| ASTM F 1291 : 2015 | Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
| ASTM F 1670 : 1998 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| ASTM F 1818 : 2015 | Standard Specification for Foot Protection for Chainsaw Users |
| ASTM F 1819 : 2007 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| ASTM D 1566 : 2006 : REV B | Standard Terminology Relating to Rubber |
| ASTM F 1494 : 1999 | Standard Terminology Relating to Protective Clothing |
| ASTM F 2815 : 2010 | Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program |
| ASTM F 1359 : 1999 : REV A | Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin |
| ASTM F 2733 : 2009 | Standard Specification for Flame Resistant Rainwear for Protection Against Flame Hazards |
| ASTM F 2894 : 2012 : REV A | Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
| ASTM F 1818 : 2015 : R2022 | Standard Specification for Foot Protection for Chainsaw Users |
| ASTM D 1566 : 2005 : REV B | Standard Terminology Relating to Rubber |
| ASTM F 1407 : 1999 : REV A | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method |
| ASTM F 1358 : 2008 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 2061 : 2017 | Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions |
| ASTM F 2815 : 2010 : R2014 | Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program (Withdrawn 2019) |
| ASTM F 2407 : 2006 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| ASTM F 1383 : 2012 | Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact |
| ASTM F 1670 : 2003 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| ASTM F 2668 : 2007 : R2011 | Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles |
| ASTM F 1060 : 2008 | Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact |
| ASTM D 1566 : 2011 | Standard Terminology Relating to Rubber |
| ASTM F 1060 : 2005 | Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact |
| ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
| ASTM F 1671 : 2007 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| ASTM F 1414 : 2015 | Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing |
| ASTM F 1458 : 2004 : R2008 | Standard Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices |
| ASTM F 2894 : 2012 : REV B | Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
| ASTM D 1566 : 2000 : REV B | Standard Terminology Relating to Rubber |
| ASTM F 1154 : 2018 | Standard Practices for Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles, Ensemble Elements, and Other Components |
| ASTM F 2101 : 2019 | Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <emph type="ital" >Staphylococcus aureus</emph> |
| ASTM F 1291 : 2005 | Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
| ASTM F 1671 : 2003 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
| ASTM F 1002 : 2006 | Standard Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ASTM D 1566 : 2014 | Standard Terminology Relating to Rubber |
| ASTM F 1002 : 2015 : R2021 | Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ASTM F 1154 : 2011 | Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components |
| ASTM F 1060 : 2018 | Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR) |
| ASTM F 1731 : 1996 | Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing |
| ASTM F 2302 : 2022 | Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame |
| ASTM F 1060 : 2016 | Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR) |
| ASTM F 1002 : 2014 | Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ASTM D 1566 : 2010 | Standard Terminology Relating to Rubber |
| ASTM F 1291 : 2022 | Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
| ASTM F 1897 : 2004 | Standard Specification for Leg Protection for Chain Saw Users |
| ASTM F 1494 : 2003 : R2011 | Standard Terminology Relating to Protective Clothing |
| ASTM F 1358 : 2000 : R2005 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 1494 : 2001 | Standard Terminology Relating to Protective Clothing |
| ASTM F 2101 : 2007 | Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <i>Staphylococcus aureus</i> |
| ASTM F 1060 : 1987 : R1993 : EDT 1 | Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact |
| ASTM F 1154 : 2010 | Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components+ |
| ASTM F 1154 : 1999 : REV A | Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles |
| ASTM F 1819 : 2019 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| ASTM F 1359 : 2007 | Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin |
| ASTM F 1461 : 2017 | Standard Practice for Chemical Protective Clothing Program |
| ASTM F 1458 : 2015 | Standard Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices |
| ASTM D 1566 : 2003 | Standard Terminology Relating to Rubber |
| ASTM F 2302 : 2003 | Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant |
| ASTM F 2894 : 2012 | Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
| ASTM D 1566 : 2000 | Standard Terminology Relating to Rubber |
| ASTM F 1819 : 2004 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| ASTM F 1819 : 1998 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| ASTM F 2894 : 2014 | Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
| ASTM F 1731 : 2021 | Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing |
| ASTM F 2300 : 2004 | Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing |
| ASTM F 2894 : 2019 | Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
| ASTM F 2300 : 2010 | Standard Test Method for Measuring the Performance of Personal Cooling Systems Using Physiological Testing |
| ASTM D 1566 : 2020 | Standard Terminology Relating to Rubber |
| ASTM F 2668 : 2016 | Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 1566 : 2007 : REV A | Standard Terminology Relating to Rubber |
| ASTM F 1731 : 1996 : R2008 | Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing |
| ASTM F 1819 : 2007 : R2013 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
| ASTM F 2407 : 2006 : R2013 : EDT 1 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| ASTM F 1291 : 2016 | Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
| ASTM D 1566 : 2005 : REV C | Standard Terminology Relating to Rubber |
| ASTM F 1458 : 2004 | Standard Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices |
| ASTM F 2894 : 2011 | Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
| ASTM F 2061 : 2000 | Standard Practice for Chemical Protective Clothing Care and Maintenance Instructions |
| ASTM F 1358 : 2000 | Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance |
| ASTM F 1862 : 2007 | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| ASTM F 1407 : 2012 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
| ASTM F 1862 : 2005 | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| ASTM F 2669 : 2012 : R2018 | Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides (Withdrawn 2023) |
| ASTM F 1449 : 2001 | Standard Guide for Care and Maintenance of Flame, Thermally and Arc Resistant Clothing |
| ASTM F 1002 : 2013 | Standard Performance Specification for Protective Clothing and the Materials from Which It Is Made for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ASTM D 1566 : 2010 : EDT 1 | Standard Terminology Relating to Rubber |
| ASTM F 2061 : 2012 | Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions |
| ASTM F 1670 : 2007 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| ASTM F 1291 : 2010 | Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
| ASTM F 1897 : 2014 | Standard Specification for Leg Protection for Chain Saw Users |
| ASTM F 1461 : 2012 | Standard Practice for Chemical Protective Clothing Program |
| ASTM F 1461 : 1993 : R1998 : EDT 1 | Standard Practice for Chemical Protective Clothing Program |
| ASTM F 2733 : 2017 | Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards |
| ASTM F 1458 : 1998 | Standard Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices |
| ASTM D 1566 : 2008 : REV B | Standard Terminology Relating to Rubber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.