ASTM F 1090 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Classification for Bank and Mercantile Vault Construction
Hardcopy , PDF
05-20-2024
English
01-29-2015
Committee |
F 12
|
DocumentType |
Standard
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This classification is for the use and guidance of those who purchase, design, construct, install, approve, or modify storage vault enclosures, intended for the protection of assets against loss due to forced entry.
1.2This classification is a systematic arrangement of constructed products, based on similar intrusion resistance characteristics, as derived from available test data.
1.3This classification does not address fire resistivity.
1.4This classification does not address the methods of interfacing vault components. Things such as tamper notification, intrusion detection, response timelines, or other issues, typically forming a complete vault system, should be considered for inclusion.
1.5Nothing in this classification is intended to prevent the use of systems, methods, or devices that provide a level of intrusion resistance equivalent to that prescribed herein.
1.5.1Any system, method, or device different from that detailed herein may be examined, in accordance with the intent of this standard, and if found equivalent, may be included.
1.6Nothing in this classification shall be construed to prohibit better or safer conditions than the requirements specified herein.
1.7Each standard designation cited shall be meant to be the edition in effect on the date this classification was published.
1.8A rationale is given in Appendix X1.
Note 1:For more information on the construction of bank and mercantile vaults, refer to the following documents: ASTM Specifications A184/A184M, A615/A615M, A635/A635M, C33, C94/C94M, C150, C494/C494M, C618, C685/C685M; American Concrete Institute Building Requirements ACI 318, and American Welding Society Structural Welding Code D 1.4.
1.9The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are given for information only.
ASTM F 1247 : 1989 : R2018 | Standard Specification for Intrusion Resistant Generic Vault Structures |
ASTM A 615/A615M : 2020 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
ASTM C 94/C94M : 2020 | Standard Specification for Ready-Mixed Concrete |
ASTM C 494/C494M : 2019 | Standard Specification for Chemical Admixtures for Concrete |
ASTM C 494/C494M : 2019 : EDT 1 | Standard Specification for Chemical Admixtures for Concrete |
ASTM C 94/C94M : 2021 : REV B | Standard Specification for Ready-Mixed Concrete |
ASTM C 39/C39M : 2021 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 39/C39M : 2023 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM A 820/A820M : 2022 | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
ASTM A 635/A635M : 2015 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
ASTM C 94/C94M : 2021 : REV A | Standard Specification for Ready-Mixed Concrete |
ASTM C 1116 : 2002 | Standard Specification for Fiber-Reinforced Concrete and Shotcrete |
ASTM A 615/A615M : 2022 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
ASTM C 39/C39M : 2015 : REV A | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 618 : 2023 : EDT 1 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 1116 : 2000 | Standard Specification for Fiber-Reinforced Concrete and Shotcrete |
ASTM C 39/C39M : 2020 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 618 : 2022 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 94/C94M : 2022 : REV A | Standard Specification for Ready-Mixed Concrete |
ASTM C 94/C94M : 2024 | Standard Specification for Ready-Mixed Concrete |
ASTM C 94/C94M : 2024 : REV A | Standard Specification for Ready-Mixed Concrete |
ASTM C 94/C94M : 2021 | Standard Specification for Ready-Mixed Concrete |
ASTM C 618 : 2023 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 1116 : 2003 | Standard Specification for Fiber-Reinforced Concrete and Shotcrete |
ASTM A 820/A820M : 2016 | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
ASTM C 39/C39M : 2018 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM A 635/A635M : 2022 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
ASTM C 494/C494M : 2010 | Standard Specification for Chemical Admixtures for Concrete |
ASTM C 94/C94M : 2022 | Standard Specification for Ready-Mixed Concrete |
ASTM C 618 : 2019 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 33 : 1985 | Standard Specification for Concrete Aggregates |
ASTM A 184/A184M : 1996 | Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement |
ASTM C 150 : 2002 : REV A : EDT 1 | Standard Specification for Portland Cement |
ASTM C 94/C94M : 2023 | Standard Specification for Ready-Mixed Concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.