ASTM E 70
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE
Superseded date
03-12-2017
Superseded by
Published date
01-01-2015
Sorry this product is not available in your region.
CONTAINED IN VOL. 15.05, 2017 Establishes the apparatus and procedures for the electrometric measurement of pH values of aqueous solutions with the glass electrode.
Committee |
D 16
|
DocumentType |
Standard
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
O-S-635 Revision E:2007 | SODIUM POLYPHOSPHATES, TECHNICAL |
ASTM D 5400 : 2015 : REDLINE | Standard Test Methods for Hydroxypropylcellulose |
ASTM D 461 : 1993 | Standard Test Methods for Felt (Withdrawn 2004) |
ASTM D 778 : 1997 : R2002 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
ASTM D 1287 : 2011 : REDLINE | Standard Test Method for pH of Engine Coolants and Antirusts |
ASTM D 1208 : 1996 : R2012 | Standard Test Methods for Common Properties of Certain Pigments |
ASTM D 4213 : 2008 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 3450 : 2015 : REDLINE | Standard Test Method for Washability Properties of Interior Architectural Coatings |
ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
SAE AMS 2821 : 2017 | SALTS, HEAT-TREATING (FOR METALS) |
MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
SAE AMS1435C | FLUID, GENERIC, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS |
ASTM D 1417 : 2016 : REDLINE | Standard Test Methods for Rubber Latices—Synthetic |
SAE AMS F 24610 : 2016 | FIXANT, HOLD DOWN |
SAE AMS1539 | CLEANING COMPOUND, TERPENE Circuit Board Cleaner |
SAE AMS1428J | FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
MIL-H-22072 Revision C:1984 | HYDRAULIC FLUID, CATAPULT, NATO CODE NUMBER H-579 |
MIL-C-52947 Revision B:1986 | COAGULANT, WATER TREATMENT: POLYELECTROLYTE, CATIONIC, LIQUID |
MIL-T-48149 Revision A:1976 | Titanium Dioxide, Dry |
MIL-C-81947 Revision A:1975 | COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT |
MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
MIL-P-47184 Revision A:1990 | PLATING, NICKEL-TUNGSTEN, ELECTRODEPOSIT ON ALUMINUM ALLOYS, BY SELECTIVE (BRUSH) METHOD |
MIL-C-51090 Revision A:1963 | CASEIN HYDROLYSATE |
MIL-DTL-32585 Base Document:2017 | Insulation, Thermal and Acoustic, Fibrous Glass |
MIL-I-22023 Revision D:1982 | INSULATION FELT, THERMAL AND SOUND ABSORBING FELT, FIBROUS GLASS, FLEXIBLE |
O-P-1731 Base Document:1973 | PENETRATING FLUID |
MIL-DTL-24800 Base Document:1996 | CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
O-S-602 Revision E:1977 | SODIUM HYPOCHLORITE SOLUTION |
MIL I 85470 : A | INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH |
MIL-DTL-27686 Revision G:1997 | INHIBITOR, ICING, FUEL SYSTEM |
MIL-DTL-757 Revision C:2012 | Lead Styphnate, Normal |
MIL-L-00757 Revision B:1994 | LEAD STYPHNATE, NORMAL |
P-W-155 Revision C:1978 | WAX, FLOOR, WATER-EMULSION |
A-A-19 Revision D:2009 | SCALE REMOVING COMPOUND (POWDER, SULFAMIC ACID) |
TT-S-223 Revision B:1978 | SEALER, SURFACE, FLOOR, WATER EMULSION TYPE |
MIL-STD-1330 Revision D:1996 | STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS |
O-C-430 Revision A:1975 | CLEANING COMPOUND, PAINT BRUSH |
MIL-L-16355 Revision E:1993 | LEAD STYPHNATE, BASIC |
MIL-G-13734 Revision B:1968 | GERMICIDE, QUARTERNARY AMMONIUM TYPE |
A-A-1270 Base Document:1996 | ADHESIVE, POLYVINYL ACETATE EMULSION, GENERAL PURPOSE |
MIL-PRF-29607 Base Document:1996 | CLEANING COMPOUND, AVIONICS COMPONENTS, NON-OZONE DEPLETING |
MIL-L-3055 Revision C:1992 | LEAD AZIDE |
MIL-C-87936 Revision A:1985 | CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE |
DOD-F-24610 Base Document:1982 | FIXANT, HOLD DOWN |
JJJ-L-821 Revision A:1969 | LITHOGRAPHIC PLATE PRESERVING GUM |
MIL-L-63470 Base Document:1981 | Lithium Chloride (For Use In Ammunition) |
A-A-2702 Revision B:1998 | SEALING COMPOUND (LIQUID PROTECTANT AND "BEAUTIFIER") |
MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
MIL-PRF-32359 Base Document:2012 | CLEANER, GENERAL, FOR GROUND VEHICLES AND GROUND SUPPORT EQUIPMENT, HAP-FREE |
MIL-PRF-22344 Revision E:2004 | INSULATION, PIPE, THERMAL |
MIL-C-83873 Revision A:1993 | CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
MIL C 29602 : 0 | CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS |
MIL-PRF-32405 Base Document:2013 | CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
P-F-430 Revision C:1978 | FINISH, FLOOR, WATER EMULSION (FOR USE ON LIGHT COLORED FLOORS) |
P-C-436 Revision E:1986 | CLEANING COMPOUND, ALKALI, BOILING VAT (SOAK) OR HYDROSTEAM |
CCC-C-46 Revision D:1986 | CLOTH, CLEANING, NONWOVEN FABRIC |
MIL-PRF-32177 Revision A:2012 | CLEANING COMPOUND, NONSKID |
MIL L 0016355 : D | LEAD STYPHNATE, BASIC |
O-B-420 Revision C:1976 | BLEACH, LAUNDRY, ORGANIC CHLORINE |
A-A-50169 Revision B:2011 | Skin Protective Compounds, Chemical Barrier |
MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
MIL-D-83411 Revision A:1973 | DEICER/ANTI-ICER FLUID (FOR RUNWAYS AND TAXIWAYS) |
MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
MIL-STD-1678-3 Revision C:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 3: PHYSICAL, MECHANICAL, ENVIRONMENTAL AND MATERIAL MEASUREMENTS (PART 3 OF 6 PARTS) |
MIL-PRF-32587 Base Document:2018 | Remover, Paint, Hap-Free, Neutral |
MIL-P-47215 Revision B:1992 | PRIMER, ABLATIVE RESISTANT COATING |
ASTM D 1076 : 2015 : REDLINE | Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
ASTM D 6361/D6361M : 1998 : R2015 | Standard Guide for Selecting Cleaning Agents and Processes |
ASTM D 778 : 1997 : R2007 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures) (Withdrawn 2010) |
ASTM D 778 : 1997 | Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures) |
ASTM F 62 : 1968 : R1984 | Method of Test for Tin in Electronic Grade Hydrogen Peroxide Solutions |
ASTM D 4078 : 2002 : R2008 | Standard Specification for Water Emulsion Floor Polish |
ASTM D 1208 : 1996 : R2007 | Standard Test Methods for Common Properties of Certain Pigments |
ASTM D 1583 : 2001 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
ASTM D 6813 : 2002 : REV A : R2013 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
ASTM D 6666 : 2004 : R2014 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
ASTM D 3837 : 1995 : R2002 | Standard Practice for Preparing a Solution of Alkali-Soluble Resins |
ASTM D 4608 : 1989 : R2003 | Standard Test Method for Citrate in Detergents |
ASTM D 3837 : 1995 | Standard Practice for Preparing a Solution of Alkali-Soluble Resins |
ASTM D 3837 : 1995 : R2012 | Standard Practice for Preparing a Solution of Alkali–Soluble Resins |
ASTM D 4608 : 1989 : R2009 | Standard Test Method for Citrate in Detergents |
BS M 75:1994 | Aircraft de-icing/anti-icing Newtonian fluids, ISO type I |
ASTM D 6666 : 2004 : R2009 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
ASTM D 2363 : 1979 : R1995 : EDT 1 | Standard Test Methods for Hydroxypropyl Methylcellulose |
ASTM F 7 : 1995 : R2016 | Standard Specification for Aluminum Oxide Powder |
ASTM D 2363 : 1979 : R2011 | Standard Test Methods for Hydroxypropyl Methylcellulose |
AASHTO T 157 : 2012(R2016) | Standard Method of Test for Air-Entraining Admixtures for Concrete<br> |
ASTM F 7 : 1995 : R2011 | Standard Specification for Aluminum Oxide Powder |
ASTM D 2165 : 1994 : R2012 : EDT 1 | Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers (Withdrawn 2021) |
ASTM D 3837 : 1995 : R2019 | Standard Practice for Preparing a Solution of Alkali–Soluble Resins |
DIN EN 16900:2015-09 (Draft) | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
ASTM D 464 : 2015 : REDLINE | Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products |
ASTM D 3837 : 1995 : R2007 | Standard Practice for Preparing a Solution of Alkali-Soluble Resins |
ASTM D 3716 : 2014 : REDLINE | Standard Test Methods for Use of Emulsion Polymers in Floor Polishes |
ASTM D 501 : 2003 : R2009 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
ASTM D 6361 : 1998 | Standard Guide for Selecting Cleaning Agents and Processes |
ASTM D 4608 : 1989 : R1995 : EDT 1 | Standard Test Method for Citrate in Detergents |
ASTM D 2363 : 1979 : R2000 : EDT 1 | Standard Test Methods for Hydroxypropyl Methylcellulose |
ASTM F 7 : 1995 : R2006 | Standard Specification for Aluminum Oxide Powder |
ASTM D 2165 : 1994 : R2006 | Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers |
ASTM D 1293 : 2018 : REDLINE | Standard Test Methods for pH of Water |
ASTM C 400 : 1998 : R2006 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
ASTM D 3440 : 2013 : REDLINE | GUIDE FOR PREPARING SPECIFICATIONS FOR WATER-EMULSION FLOOR POLISHES |
ASTM D 7544 : 2012 : R2017 | Standard Specification for Pyrolysis Liquid Biofuel |
ASTM D 6739 : 2011 | Standard Test Method for Silica<char: emdash>pH Value |
ASTM F 7 : 1995 : R2000 | Standard Specification for Aluminum Oxide Powder |
ASTM D 202 : 2017 : REDLINE | Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation |
ASTM D 1172 : 2015 : REDLINE | Standard Guide for pH of Aqueous Solutions of Soaps and Detergents |
ASTM D 7044 : 2015 : REDLINE | Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids |
ASTM D 4317 : 2016 : REDLINE | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
ASTM C 25 : 2017 : REDLINE | TEST METHODS FOR CHEMICAL ANALYSIS OF LIMESTONE, QUICKLIME, AND HYDRATED LIME |
ASTM D 2165 : 1994 : R2000 | Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers |
ASTM D 6666 : 2004 : R2019 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
ASTM C 400 : 1998 : R2013 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
ASTM E 359 : 2017 : REDLINE | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
ASTM C 400 : 1998 : R2013 : EDT 1 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
ASTM E 1910 : 2004 | Test Method for Agricultural pH Control Agents |
ASTM D 4608 : 1989 : R2017 | Standard Test Method for Citrate in Detergents |
ASTM D 6666 : 2004 | Standard Guide for Evaluation of Aqueous Polymer Quenchants |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 4441 : 2015 : REDLINE | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
PD CEN/TR 17103:2017 | Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination |
ASTM E 1547 : 2009 | Standard Terminology Relating to Industrial and Specialty Chemicals |
ASTM C 400 : 1998 | Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid |
BS M 78:1995 | Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II |
ASTM D 7705/D7705M : 2012 | Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
ASTM D 2363 : 1979 : R2006 | Standard Test Methods for Hydroxypropyl Methylcellulose |
ASTM D 501 : 2003 : R2016 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
ASTM D 7544 : 2012 | Standard Specification for Pyrolysis Liquid Biofuel |
ASTM E 1547 : 2009 : R2017 | Standard Terminology Relating to Industrial and Specialty Chemicals |
ASTM D 6739 : 2011 : R2015 | Standard Test Method for Silica—pH Value |
ASTM D 501 : 2003 | Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
MIL-PRF-29602 Revision A:2005 | CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET |
ASTM B 368 : 2009 : R2014 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
SAE J 3021 : 2014 | RECOMMENDED PRACTICE FOR DETERMINING MATERIAL PROPERTIES OF LI-BATTERY CATHODE ACTIVE MATERIALS |
ASTM D 465 : 2015 : REDLINE | Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products |
ASTM D 7100 : 2011 : REDLINE | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
ASTM D 6361/D6361M : 1998 : R2010 : EDT 1 | Standard Guide for Selecting Cleaning Agents and Processes |
ASTM D 4213 : 2008 : R2012 | Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
ASTM D 4078 : 2002 : R2015 | Standard Specification for Water Emulsion Floor Polish |
ASTM D 4010 : 1983 : R1995 | Standard Specification for Waterless Hand Cleaner (Withdrawn 2000) |
ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
UNE-EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
ASTM D 2106 : 2007 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
ASTM D 4584 : 2005 : R2010 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
ASTM D 2106 : 2007 : R2017 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
ASTM D 4584 : 2005 : R2015 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
ASTM D 6813 : 2002 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM D 1627 : 1994 : R2000 | Standard Test Methods for Chemical Analysis of Acid Copper Chromate (Withdrawn 2006) |
ASTM F 862 : 2011 | Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids |
ASTM D 2106 : 2007 : R2012 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
ASTM D 6813 : 2002 : REV A | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
TAPPI T 252 : 2002 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
ASTM D 2073 : 1992 : R1998 : EDT 1 | Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines, Amidoamines, and Diamines by Referee Potentiometric Method (Withdrawn 2007) |
ASTM D 2081 : 1992 : R1998 | Standard Test Method for pH of Fatty Quaternary Ammonium Chlorides (Withdrawn 2007) |
ASTM D 2106 : 2007 : EDT 1 | Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents |
ASTM D 4143 : 2016 : REDLINE | Standard Guide for Testing Latex Vehicles |
ASTM D 2080 : 1992 : R1998 | Standard Test Method for Average Molecular Weight of Fatty Quaternary Ammonium Chlorides (Withdrawn 2007) |
TAPPI T 252 : 2002 : R2012 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
ASTM D 4584 : 2005 | Standard Test Method for Measuring Apparent pH of Electrocoat Baths |
TAPPI T 252 : 2002 : R2007 | PH AND ELECTRICAL CONDUCTIVITY OF HOT WATER EXTRACTS OF PULP, PAPER, AND PAPERBOARD |
ASTM F 862 : 2011 : R2017 | Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids |
ASTM D 6813 : 2002 : REV A : R2007 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM E 1910/E1910M : 2015 : REDLINE | Standard Test Method for Agricultural pH Control Agents, Measurement of pH Change and Buffering Capacity |
SAE AMSC19853 | Carbon Removing Compound (For Use in Agitated Tank) |
CSA N287.5 :2011 | EXAMINATION AND TESTING REQUIREMENTS FOR CONCRETE CONTAINMENT STRUCTURES FOR NUCLEAR POWER PLANTS |
ASTM D 4078 : 2002 | Standard Specification for Water Emulsion Floor Polish |
ASTM D 1208 : 1996 : R2002 | Standard Test Methods for Common Properties of Certain Pigments |
ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 1583 : 2001 : R2013 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
ASTM E 2275 : 2014 : REDLINE | Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance |
SAE MS1005_201708 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
SAE AMS1541C | CLEANER, FUEL DROP TANK, WATER-SOLUBLE |
BS EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
TT-R-2918 Revision A:2001 | REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
ASTM B 368 : 2009 | Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
ASTM D 1583 : 2001 : R2008 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
ASTM D 1279 : 1982 : R1994 | Standard Test Method for Buffering Action of Metal Cleaners (Withdrawn 1999) |
ASTM D 1208 : 1996 | Standard Test Methods for Common Properties of Certain Pigments |
ASTM D 1583 : 2001 : R2018 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
SAE AS 5900 : 2016 | STANDARD TEST METHOD FOR AERODYNAMIC ACCEPTANCE OF AMS1424 AND AMS1428 AIRCRAFT DEICING/ANTI-ICING FLUIDS |
SAE AMS1424N | FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1 |
SAE AMS1548B | CLEANER, TURBINE ENGINE GAS PATH, SOLVENT EMULSION TYPE |
SAE MS1000_201302 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
CEN/TR 17103:2017 | Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
SAE AMS1725C | SKIN PROTECTIVE COMPOUND, CHEMICAL BARRIER |
SAE AMS1431D | COMPOUND, SOLID RUNWAY AND TAXIWAY DEICING/ANTI-ICING |
SAE J 2334 : 2016 | LABORATORY CYCLIC CORROSION TEST |
TAPPI T 428 : 2013 | HOT WATER EXTRACTABLE ACIDITY OR ALKALINITY OF PAPER |
SAE AMS1426D | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS GLYCOL BASE |
SAE AMS 1432 : 1995 | FLUID, DEICING/ANTI-ICING, RUNWAYS AND TAXIWAYS, POTASSIUM ACETATE BASE |
SAE AMS1476C | DEODORANT, AIRCRAFT TOILET |
SAE AMS 3803 : 2016 | WIPES, COTTON, LOOSELY WOVEN |
S.R. CEN/TR 17103:2017 | FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
ASTM E 180 : 2003 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.