ASTM E 53 : 2007 : R2013
Current
Current
The latest, up-to-date edition.
Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry (Withdrawn 2022)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
10-28-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 03.05, 2014 Defines the chemical analysis of copper having minimum purity of 99.75% to 99.95%.
| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| ProductNote |
Reconfirmed 2013
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the chemical analysis of copper having minimum purity of 99.75 % to 99.95 %.
1.2This test method covers the electrolytic determination of copper in chemical, electrolytic, and fire refined copper. In this method silver is deposited with the copper, and is reported as copper.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 8.4 and Section 9.
| ASTM B 170 : 1999 : R2020 | Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes |
| ASTM B 115 : 2010 : R2021 | Standard Specification for Electrolytic Copper Cathode |
| ASTM F 467 : 2013 : R2018 | Standard Specification for Nonferrous Nuts for General Use |
| ASTM B 88M : 2020 | Standard Specification for Seamless Copper Water Tube (Metric) |
| ASTM B 903 : 2015 | Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM B 75/B75M : 2020 | Standard Specification for Seamless Copper Tube |
| ASTM F 467M : 2006 : REV A : R2018 | Standard Specification for Nonferrous Nuts for General Use (Metric) |
| ASTM B 188 : 2015 : EDT 1 | Standard Specification for Seamless Copper Bus Pipe and Tube |
| ASTM F 468M : 2006 : R2018 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) |
| ASTM B 272 : 2012 : R2019 | Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip) |
| ASTM B 5 : 2016 | Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes |
| ASTM B 640 : 2012 : REV A : R2021 | Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service |
| ASTM B 42 : 2020 | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| ASTM B 743 : 2012 : R2020 | Standard Specification for Seamless Copper Tube in Coils |
| ASTM F 29 : 1997 : R2017 | Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications |
| ASTM B 111/B111M : 2018 : REV A | Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock |
| ASTM B 379 : 2020 | Standard Specification for Phosphorized Coppers—Refinery Shapes |
| ASTM B 249/B249M : 2020 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings |
| ASTM B 1003 : 2016 | Standard Specification for Seamless Copper Tube for Linesets |
| ASTM B 819 : 2019 | Standard Specification for Seamless Copper Tube for Medical Gas Systems |
| ASTM B 1014 : 2020 | Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s) |
| ASTM B 280 : 2020 | Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
| ASTM B 187/B187M : 2020 | Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes |
| ASTM B 49 : 2020 | Standard Specification for Copper Rod for Electrical Purposes |
| ASTM B 248M : 2017 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric) |
| ASTM B 950 : 2021 : EDT 1 | Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys |
| ASTM B 372 : 2017 | Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube |
| ASTM B 837 : 2019 | Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems |
| ASTM B 395/B395M : 2018 | Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes |
| ASTM B 150/B150M : 2019 | Standard Specification for Aluminum Bronze Rod, Bar, and Shapes |
| ASTM B 974/B974M : 2016 : R2021 | Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire |
| ASTM B 152/B152M : 2019 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| ASTM B 360 : 2020 | Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications |
| ASTM B 306 : 2020 | Standard Specification for Copper Drainage Tube (DWV) |
| ASTM B 216 : 2016 | Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes |
| ASTM B 359/B359M : 2018 | Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM B 88 : 2020 | Standard Specification for Seamless Copper Water Tube |
| ASTM B 956 : 2019 : EDT 1 | Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins |
| ASTM B 248 : 2017 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar |
| ASTM B 1001 : 2017 | Standard Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans |
| ASTM B 251/B251M : 2017 | Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
| ASTM B 747 : 2020 | Standard Specification for Copper-Zirconium Alloy Sheet and Strip |
| ASTM F 468 : 2016 | Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
| ASTM F 3042 : 2013 : R2018 | Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws |
| ASTM B 447 : 2012 : REV A : R2021 | Standard Specification for Welded Copper Tube |
| ASTM B 302 : 2017 | Standard Specification for Threadless Copper Pipe, Standard Sizes |
| ASTM B 929 : 2017 | Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar |
| ASTM B 543/B543M : 2018 | Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 255 : 1991 : R1997 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
| ASTM E 135 : 2003 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 2019 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1601 : 1998 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1024 : 1997 : R2004 | Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry (Withdrawn 2004) |
| ASTM E 1601 : 2010 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 1601 : 2012 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 135 : 2002 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1601 : 2012 | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 : REV C | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 173 : 1993 | Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997) |
| ASTM E 50 : 1982 : R1986 | Standard Practices for Apparatus, Reagents, and Safety Precautions for Chemical Analysis of Metals |
| ASTM E 1024 : 1997 | Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry |
| ASTM E 135 : 2020 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.