ASTM E 466 : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
07-08-2021
English
06-30-2015
CONTAINED IN VOL. 03.01, 2015 Defines the procedure for the performance of axial force controlled fatigue tests to obtain the fatigue strength of metallic materials in the fatigue regime where the strains are predominately elastic, both upon initial loading and throughout the test.
Committee |
E 08
|
DocumentType |
Redline
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This practice covers the procedure for the performance of axial force controlled fatigue tests to obtain the fatigue strength of metallic materials in the fatigue regime where the strains are predominately elastic, both upon initial loading and throughout the test. This practice is limited to the fatigue testing of axial unnotched and notched specimens subjected to a constant amplitude, periodic forcing function in air at room temperature. This practice is not intended for application in axial fatigue tests of components or parts.
Note 1:The following documents, although not directly referenced in the text, are considered important enough to be listed in this practice:
E739 Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data
STP 566 Handbook of Fatigue Testing2
STP 588 Manual on Statistical Planning and Analysis for Fatigue Experiments3
STP 731 Tables for Estimating Median Fatigue Limits4
NFPA T2.6.1 : 2001 : R2014 | FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT |
PD ISO/TR 14345:2012 | Fatigue. Fatigue testing of welded components. Guidance |
05/30132540 DC : DRAFT APR 2005 | ISO 14801 - DENTISTRY - FATIGUE TEST FOR ENDOSSEOUS DENTAL IMPLANTS |
ASTM E 606/E606M : 2012 : REDLINE | Standard Test Method for Strain-Controlled Fatigue Testing |
ASTM F 1801 : 1997 : R2014 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
ASTM E 740/E740M : 2003 : R2016 | Standard Practice for Fracture Testing with Surface-Crack Tension Specimens |
SAE AMS 4365 : 2017 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.2CU - 2.1MG - 0.10ZR (7097-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
NFPA T2.6.1 : 2001 : R2009 | FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT |
PREN 6072 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING |
ASTM E 2789 : 2010 | Standard Guide for Fretting Fatigue Testing |
I.S. EN 16602-70-37:2014 | SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF METALS TO STRESS-CORROSION CRACKING |
ASTM F 1440 : 1992 : R1997 | Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion |
NFPA T3.6.29 : 2000 : R2009 | TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER |
NFPA T3.12.10 : 2000 : R2009 | AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL |
SAE AMS 2355 : 2017 | QUALITY ASSURANCE, SAMPLING AND TESTING, ALUMINUM ALLOYS AND MAGNESIUM ALLOY, WROUGHT PRODUCTS (EXCEPT FORGING STOCK), AND ROLLED, FORGED, OR FLASH WELDED RINGS |
NFPA T3.21.4 : 2000 : R2005 | PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE |
ASTM F 1801 : 1997 : R2009 : EDT 1 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
ASTM E 453 : 1979 : R1996 : EDT 1 | Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties |
ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
ASTM F 2346 : 2005 : R2011 | Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs |
ASTM F 1801 : 1997 : R2004 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
ASTM F 1160 : 2014 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
ASTM A 1034/A1034M : 2010 : REV A : R2015 | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars |
ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
ASTM E 740 : 2003 | Standard Practice for Fracture Testing with Surface-Crack Tension Specimens |
ASTM F 1875 : 1998 : R2004 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface |
DIN EN ISO 14801:2017-03 | DENTISTRY - IMPLANTS - DYNAMIC LOADING TEST FOR ENDOSSEOUS DENTAL IMPLANTS (ISO 14801:2016) |
DOT/FAA/AR-MMPDS-01 : 20030131 | METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS) |
14/30280226 DC : 0 | BS EN ISO 14801 - DENTISTRY - IMPLANTS - DYNAMIC FATIGUE TEST FOR ENDOSSEOUS DENTAL IMPLANTS |
ISO/TR 14345:2012 | Fatigue Fatigue testing of welded components Guidance |
ASTM E 740/E740M : 2003 | PRACTICE FOR FRACTURE TESTING WITH SURFACE-CRACK TENSION SPECIMENS |
I.S. EN 16602-70-45:2014 | SPACE PRODUCT ASSURANCE - MECHANICAL TESTING OF METALLIC MATERIALS |
BS EN 16602-70-45:2014 | Space product assurance. Mechanical testing of metallic materials |
ASTM F 1440 : 1992 : R2002 | Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion |
BS EN 16602-70-37:2014 | Space product assurance. Determination of the susceptibility of metals to stress-corrosion cracking |
SAE AMS 4361 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7451) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
SAE AMS 4050 : 2014 | ALUMINUM ALLOY, PLATE, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7451), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
ASTM F 1875 : 1998 : R2014 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface |
ASTM F 1612 : 1995 : R2000 | Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion |
ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
IEC 62047-6:2009 | Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials |
ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
I.S. EN ISO 14801:2016 | DENTISTRY - IMPLANTS - DYNAMIC LOADING TEST FOR ENDOSSEOUS DENTAL IMPLANTS (ISO 14801:2016) |
NFPA T3.12.10 : 2000 : R2014 | AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL |
SAE AMS 4249B : 2012 (R2018) | ALUMINUM ALLOY CASTINGS 7.0SI - 0.58MG - 0.15TI - 0.06BE (D357.0-T6) SOLUTION AND PRECIPITATION HEAT TREATED (REQUIRING FATIGUE AND FRACTURE TOUGHNESS TESTING) |
ASTM E 453 : 1979 : R2001 | Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties (Withdrawn 2008) |
SAE AMS 4354 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
BS EN 6072:2010 | Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing |
ANSI/CSA CHMC 1-2014 (R2018) | Test methods for evaluating material compatibility in compressed hydrogen applications - Metals |
ASTM E 2789 : 2010 : R2015 | Standard Guide for Fretting Fatigue Testing |
BS EN 62047-6:2010 | Semiconductor devices. Micro-electromechanical devices Axial fatigue testing methods of thin film materials |
NFPA T3.5.26 : 2000 : R2009 | HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE |
ASTM F 1612 : 1995 : R2005 | Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion (Withdrawn 2011) |
NFPA T3.4.7 : 2000 : R2014 | ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR |
NFPA T3.6.31 : 2000 : R2014 | TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER |
MIL-DTL-32459 Base Document:2013 | Coatings, Anodic for Magnesium and Magnesium Alloys |
ASTM F 1875 : 1998 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface |
NFPA T3.9.22 : 2000 : R2005 | PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR |
ASTM A 1034/A1034M : 20101 | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars |
NFPA T3.20.8 : 2000 : R2014 | QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING |
NFPA T3.20.8 : 2000 : R2006 | QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING |
NFPA T3.5.26 : 2000 : R2014 | HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE |
ASTM F 1440 : 1992 : R2008 | Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion (Withdrawn 2012) |
NFPA T3.21.4 : 2000 : R2014 | PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE |
ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
ASTM E 740/E740M : 2003 : R2010 : EDT 2 | Standard Practice for Fracture Testing with Surface-Crack Tension Specimens |
NASA MSFC STD 3716 : 2017 | STANDARD FOR ADDITIVELY MANUFACTURED SPACEFLIGHT HARDWARE BY LASER POWDER BED FUSION IN METALS |
EN 16602-70-37:2014 | Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking |
NFPA T3.5.26 : 2000 : R2005 | HYDRAULIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC VALVE |
NFPA T3.6.31 : 2000 : R2006 | TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER |
NFPA T3.20.8 : 2000 : R2009 | QUICK-ACTION COUPLING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATING OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER QUICK-ACTION COUPLING |
NF EN 6072 : 2012 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING |
SAE AMS 4364 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
SAE AMS 4211 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.9CU - 2.1MG - 0.10ZR (7040-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
SAE AMS 4351 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7651) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
ASTM A 1034/A1034M : 2010 : REV A | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars |
ASTM E 740/E740M : 2003 : R2010 : EDT 1 | Standard Practice for Fracture Testing with Surface-Crack Tension Specimens |
ASTM F 1801 : 1997 | Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials |
SAE AS 7101 : 2007 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM |
NFPA T3.29.2 : 2000 : R2014 | PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH |
I.S. EN 62047-6:2010 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 6: AXIAL FATIGUE TESTING METHODS OF THIN FILM MATERIALS |
NFPA T2.6.1 : 2001 : R2005 | FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER COMPONENT |
NFPA T3.10.5.1 : 2000 : R2005 | HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR |
NFPA T3.4.7 : 2000 : R2009 | ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR |
NASA MSFC SPEC 3717 : 2017 | SPECIFICATION FOR CONTROL AND QUALIFICATION OF LASER POWDER BED FUSION METALLURGICAL PROCESSES |
CEI EN 62047-6 : 2011 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 6: AXIAL FATIGUE TESTING METHODS OF THIN FILM MATERIALS |
ASTM F 1160 : 2014 : R2017 : EDT 1 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
ISO 14801:2016 | Dentistry Implants Dynamic loading test for endosseous dental implants |
UNE-EN ISO 14801:2017 | Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016) |
BS EN ISO 14801:2003 | Dentistry. Fatigue test for endosseous dental implants |
EN 6072:2010 | Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing |
EN ISO 14801:2016 | Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016) |
EN 16602-70-45:2014 | Space product assurance - Mechanical testing of metallic materials |
NFPA T3.12.10 : 2000 : R2005 | AIR LINE FILTER, REGULATOR AND/OR LUBRICATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER FRL |
ASTM F 1659 : 1995 | Standard Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on Solid Metallic Substrates (Withdrawn 2005) |
NFPA T3.6.29 : 2000 : R2006 | TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER |
NFPA T3.9.22 : 2000 : R2009 | PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR |
NFPA T3.29.2 : 2000 : R2009 | PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH |
07/30163302 DC : 0 | BS EN 62047-6 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 6: AXIAL FATIGUE TESTING METHODS OF THIN FILM MATERIALS |
I.S. EN 6072:2010 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING |
NFPA T3.10.5.1 : 2000 : R2014 | HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR |
NFPA T3.10.5.1 : 2000 : R2009 | HYDRAULIC FILTER/SEPARATOR HOUSING - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER HYDRAULIC FILTER/SEPARATOR |
ASTM F 2346 : 2005 | Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs |
ASTM F 1875 : 1998 : R2009 | Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface |
NFPA T3.6.31 : 2000 : R2009 | TELESCOPIC CYLINDERS AND CYLINDERS OF NON-BOLTED END CONSTRUCTION - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000 - FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TELESCOPIC AND NONBOLTED END FLUID POWER CYLINDER |
NFPA T3.9.22 : 2000 : R2014 | PUMP/MOTOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PUMP AND MOTOR |
NFPA T3.4.7 : 2000 : R2005 | ACCUMULATOR - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER ACCUMULATOR |
NFPA T3.29.2 : 2000 : R2005 | PRESSURE SWITCH - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PRESSURE SWITCH |
NFPA T3.6.29 : 2000 : R2014 | TIE ROD OR BOLTED CYLINDER - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2 - 2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE METAL PRESSURE CONTAINING ENVELOPE OF A TIE ROD OR BOLTED CYLINDER |
NFPA T3.21.4 : 2000 : R2009 | PNEUMATIC VALVE - PRESSURE RATING SUPPLEMENT TO NFPA/T2.6.1 R2-2000, FLUID POWER COMPONENTS - METHOD FOR VERIFYING THE FATIGUE AND ESTABLISHING THE BURST PRESSURE RATINGS OF THE PRESSURE CONTAINING ENVELOPE OF A METAL FLUID POWER PNEUMATIC VALVE |
ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
ASTM D 7791 : 2017 : REDLINE | Standard Test Method for Uniaxial Fatigue Properties of Plastics |
DIN EN ISO 14801:2008-02 | DENTISTRY - IMPLANTS - DYNAMIC LOADING TEST FOR ENDOSSEOUS DENTAL IMPLANTS (ISO 14801:2016) |
EN 62047-6:2010 | Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials |
ASTM E 606/E606M : 2012 : REDLINE | Standard Test Method for Strain-Controlled Fatigue Testing |
ASTM E 1823 : 2013-07 | TERMINOLOGY RELATING TO FATIGUE AND FRACTURE TESTING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.