ASTM E 352 : 2018 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
Hardcopy , PDF
12-23-2023
English
02-23-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
38
|
| ProductNote |
ε1NOTE—An editorial correction was made in Table 5 in February 2022.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the chemical analysis of tool steels and other similar medium- and high-alloy steels having chemical compositions within the following limits:
| Element | Composition Range, % |
| Aluminum | 0.005 to 1.5 |
| Boron | 0.001 to 0.10 |
| Carbon | 0.03 to 2.50 |
| Chromium | 0.10 to 14.0 |
| Cobalt | 0.10 to 14.0 |
| Copper | 0.01 to 2.0 |
| Lead | 0.001 to 0.01 |
| Manganese | 0.10 to 15.00 |
| Molybdenum | 0.01 to 10.00 |
| Nickel | 0.02 to 4.00 |
| Nitrogen | 0.001 to 0.20 |
| Phosphorus | 0.002 to 0.05 |
| Silicon | 0.10 to 2.50 |
| Sulfur | 0.002 to 0.40 |
| Tungsten | 0.01 to 21.00 |
| Vanadium | 0.02 to 5.50 |
1.2The test methods in this standard are contained in the sections indicated below:
| Sections | ||
| Carbon, Total, by the Combustion— | 125–135 | |
| Carbon, Total, by the Combustion Gravimetric | 78–88 | |
| Chromium by the Atomic Absorption | (0.006 % to 1.00 %) | 174–183 |
| Chromium by the Peroxydisulfate | (0.10 % to 14.00 %) | 184–192 |
| Chromium by the Peroxydisulfate-Oxidation | 117–124 | |
| Cobalt by the Ion-Exchange— | (2 % to 14 %) | 52–59 |
| Cobalt by the Nitroso-R-Salt | (0.10 % to 5.0 %) | 60–69 |
| Copper by the Neocuproine | (0.01 % to 2.00 %) | 89–98 |
| Copper by the Sulfide Precipitation- | (0.01 % to 2.0 %) | 70–77 |
| Lead by the Ion-Exchange—Atomic | (0.001 % to 0.01 %) | 99–108 |
| Manganese by the Periodate | (0.10 % to 5.00 %) | 9–18 |
| Molybdenum by the Ion Exchange– | 203–210 | |
| Molybdenum by the Thiocyanate Spectrophotometric Method | (0.01 % to 1.50 %) | 162–173 |
| Nickel by the Dimethylglyoxime | (0.1 % to 4.0 %) | 144–151 |
| Phosphorus by the Alkalimetric Method | (0.01 % to 0.05 %) | 136–143 |
| Phosphorus by the Molybdenum Blue | (0.002 % to 0.05 %) | 19–29 |
| Silicon by the Gravimetric Method | (0.10 % to 2.50 %) | 45–51 |
| Sulfur by the Gravimetric | 29–35 | |
| Sulfur by the Combustion-Iodate | 36–44 | |
| Sulfur by the Chromatographic | 109–116 | |
| Tin by the Solvent Extraction— | (0.002 % to 0.10 %) | 152–161 |
| Vanadium by the Atomic | (0.006 % to 0.15 %) | 193–202 |
1.3Test methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.
1.4Some of the composition ranges given in 1.1 are too broad to be covered by a single test method and therefore this standard contains multiple test methods for some elements. The user must select the proper test method by matching the information given in the Scope and Interference sections of each test method with the composition of the alloy to be analyzed.
1.5The values stated in SI units are to be regarded as standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 350 : 2018 | Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron |
| ASTM E 351 : 2018 | Standard Test Methods for Chemical Analysis of Cast Iron—All Types |
| ASTM E 1473 : 2016 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| ASTM B 733 : 2021 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM A 751 : 2021 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM B 733 : 2022 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM E 1473 : 2022 | Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 353 : 2019 : EDT 1 | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 60 : 2011 : R2016 | Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
| ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 354 : 2021 : EDT 1 | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 2018 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 60 : 2011 : R2022 : EDT 1 | Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry |
| ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1806 : 2023 | Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.