ASTM E 305 : 2021
Current
The latest, up-to-date edition.
Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
Hardcopy , PDF
English
06-07-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 01
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice provides direction for establishing and controlling spark atomic emission spectrochemical analytical curves. The generation of analytical curves and their control are considered as separate though interrelated operations. This practice is applicable to spark atomic emission spectrometers.
Note 1:X-ray fluorescence spectrometric applications are no longer covered by this practice. See Guides E1361 and E1621 for discussion of this technique.
1.1.1Since software programs are readily available to compute multiple linear regressions that can be used to generate analytical curves and since most instruments include this feature, this practice does not address this procedure. However, some recommendations are given to evaluate the equations that are generated.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1999 : 2018 | Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry |
| ASTM C 1255 : 2018 | Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy |
| ASTM B 954 : 2015 | Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry |
| ASTM E 2994 : 2016 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 415 : 2017 | Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
| ASTM C 1271 : 1999 : R2020 | Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone |
| ASTM E 2209 : 2013 | Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry |
| ASTM E 1086 : 2014 | Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry |
| ASTM E 1251 : 2017 : REV A | Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry |
| ASTM E 3047 : 2016 | Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry |
| ASTM E 1476 : 2004 : R2014 | Standard Guide for Metals Identification, Grade Verification, and Sorting |
| ASTM E 1621 : 2013 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2024 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1621 : 2022 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1621 : 2021 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.