ASTM E 2371 : 2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry (Withdrawn 2013)
Available format(s)
Hardcopy , PDF
Superseded date
01-04-2013
Superseded by
Language(s)
English
Published date
06-01-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 01
|
| DocumentType |
Test Method
|
| Pages |
10
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This method describes the analysis of titanium and titanium alloys by ICP-AES (Inductively Coupled Plasma) and DCP-AES (Direct Current Plasma) for the following elements:
| Element | ApplicationRange (wt.%) | QuantitativeRange (wt.%) |
| Aluminum | 0-8 | 0.001 to 8.0 |
| Boron | 0-0.04 | 0.0008 to 0.01 |
| Chromium | 0-5 | 0.005 to 4.0 |
| Copper | 0-0.6 | 0.002 to 0.5 |
| Iron | 0-3 | 0.004 to 3.0 |
| Manganese | 0-0.04 | 0.001 to 0.01 |
| Molybdenum | 0-8 | 0.004 to 6.0 |
| Nickel | 0-1 | 0.001 to 1.0 |
| Silicon | 0-0.5 | 0.02 to 0.4 |
| Tin | 0-4 | 0.02 to 3.0 |
| Vanadium | 0-15 | 0.01 to 15.0 |
| Yttrium | 0-0.04 | 0.001 to 0.004 |
| Zirconium | 0-5 | 0.003 to 4.0 |
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety hazards statements are given in Section 9.
| ASTM F 1472 : 2014 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400) |
| ASTM F 2885 : 2017 | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM B 862 : 2014 | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| ASTM B 977 : 2013 | Standard Specification for Titanium and Titanium Ingots |
| ASTM B 299/B299M : 2018 | Standard Specification for Titanium Sponge |
| ASTM F 1813 : 2013 | Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120) |
| ASTM F 2989 : 2013 | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| ASTM E 1004 : 2017 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM F 620 : 2011 : R2015 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| ASTM B 863 : 2014 | Standard Specification for Titanium and Titanium Alloy Wire |
| ASTM F 3046 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) |
| ASTM B 338 : 2017 | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM B 348 : 2013 | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM F 2924 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM B 988 : 2018 | Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components |
| ASTM F 1295 : 2016 | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| ASTM F 1580 : 2018 | Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants |
| ASTM B 1009 : 2018 | Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures |
| ASTM B 265 : 2015 | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| ASTM F 2146 : 2013 | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
| ASTM F 3049 : 2014 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
| ASTM F 1713 : 2008 : R2013 | Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130) |
| ASTM B 381 : 2013 : R2019 | Standard Specification for Titanium and Titanium Alloy Forgings |
| ASTM F 67 : 2013 : R2017 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
| ASTM F 2066 : 2018 | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
| ASTM B 861 : 2014 | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| ASTM F 3001 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ASTM F 136 : 2013 | Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.