ASTM E 2352 : 2019
Current
Current
The latest, up-to-date edition.
Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
05-01-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This practice specifies basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and precautions associated with the facility and equipment used.
| Committee |
E 21
|
| DocumentType |
Standard Practice
|
| Pages |
14
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice specifies basic requirements, procedures, and practices for operating aerospace cleanrooms and controlled environments and precautions associated with the facility and equipment used.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 2042/E2042M : 2009 : R2016 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ASTM E 1560 : 2011 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1235 : 1995 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1559 : 2009 : R2022 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM D 737 : 2018 : R2023 | Standard Test Method for Air Permeability of Textile Fabrics |
| ASTM E 2217 : 2002 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 1234 : 2012 : R2020 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2088 : 2000 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM F 318 : 2006 | Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids |
| ASTM E 2217 : 2012 : REDLINE | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 2088 : 2006 : R2021 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM E 1234 : 1995 : EDT 1 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| ASTM E 1549 : 1995 : R2000 : EDT 1 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ISO 9237:1995 | Textiles — Determination of the permeability of fabrics to air |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| ASTM E 595 : 2015 | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| IEST RP CC016.2 : 2002(R2006) | THE RATE OF DEPOSITION OF NONVOLATILE RESIDUE IN CLEANROOMS |
| ASTM E 1731 : 1995 : R2001 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1731 : 2011 : R2018 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1559 : 2009 : R2016 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ISO 14644-2:2015 | Cleanrooms and associated controlled environments Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration |
| ASTM E 1731 : 2006 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1235 : 2012 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
| ASTM E 1216 : 1999 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 1560 : 2011 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1549 : 2006 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM E 2042 : 1999 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| FED-STD-209 Revision E:1992 | AIRBORNE PARTICULATE CLEANLINESS CLASSES IN CLEANROOMS AND CLEAN ZONES |
| ASTM E 1731 : 1995 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1234 : 2012 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2088 : 2006 : R2015 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM E 1560 : 2006 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM D 737 : 2018 | Standard Test Method for Air Permeability of Textile Fabrics |
| IEST RP CC022.2 : 2004(R2008) | ELECTROSTATIC CHARGE IN CLEANROOMS AND OTHER CONTROLLED ENVIRONMENTS |
| ASTM E 1216 : 2021 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1235 : 2001 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 595 : 2015 : R2021 | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 1235 : 2012 : R2020 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2217 : 2002 : R2007 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 2088 : 2006 : R2011 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM E 1234 : 2001 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1559 : 2000 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 1235 : 2012 : REDLINE | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1560 : 2018 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1216 : 2011 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1235 : 2012 : R2020 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1216 : 2006 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1216 : 2011 : R2016 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ASTM F 50 : 2012 : R2015 | Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles |
| ASTM E 1235 : 2008 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| ASTM E 2217 : 2012 : R2019 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 1559 : 2009 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ISO 14644-4:2001 | Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up |
| ASTM E 1560 : 1995 : R2001 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1731 : 2011 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 2042 : 2004 | Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms |
| ASTM E 1216 : 1999 : R2005 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1559 : 2003 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM F 25 : 2004 | Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas |
| IEST RP CC026.1 : 1995 | CLEANROOM OPERATIONS |
| ASTM F 50 : 2021 | Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles |
| ASTM E 1234 : 2007 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1560 : 1995 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 2217 : 2012 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 2088 : 2006 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM E 1234 : 2012 : REDLINE | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM D 737 : 2004 | Test Method for Air Permeability of Textile Fabrics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.