ASTM E 2312 : 2011 : R2019
Current
Current
The latest, up-to-date edition.
Standard Practice for Tests of Cleanroom Materials
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
07-01-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This practice identifies test methods used to evaluate the properties of various materials and products used in cleanrooms and for cleanroom construction.
| Committee |
E 21
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ANSI/AAMI/ISO 11137, IEST RP-CC022.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This practice identifies test methods used to evaluate the properties of various materials and products used in cleanrooms and for cleanroom construction.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1560 : 2011 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1235 : 1995 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1559 : 2009 : R2022 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 2217 : 2002 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 1234 : 2012 : R2020 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2090 : 2006 | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy |
| ASTM E 2088 : 2000 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM E 2088 : 2006 : R2021 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM E 1234 : 1995 : EDT 1 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1549 : 1995 : R2000 : EDT 1 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM E 595 : 2015 | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 1731 : 1995 : R2001 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1731 : 2011 : R2018 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1559 : 2009 : R2016 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 1731 : 2006 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1235 : 2012 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1216 : 1999 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1560 : 2011 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1549 : 2006 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM E 2090 : 2012 | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy |
| ASTM E 1731 : 1995 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1234 : 2012 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2088 : 2006 : R2015 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM E 1560 : 2006 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1216 : 2021 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1235 : 2001 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 595 : 2015 : R2021 | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| ASTM E 1235 : 2012 : R2020 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2090 : 2012 : R2020 | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy |
| ASTM E 2217 : 2002 : R2007 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 2088 : 2006 : R2011 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
| ASTM E 1234 : 2001 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1559 : 2000 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 1560 : 2018 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1216 : 2011 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1235 : 2012 : R2020 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2090 : 2000 | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Clean Room Wipers Using Optical and Scanning Electron Microscopy |
| ASTM E 1216 : 2006 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1216 : 2011 : R2016 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1235 : 2008 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft |
| ASTM E 2217 : 2012 : R2019 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 1559 : 2009 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 1560 : 1995 : R2001 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 1731 : 2011 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves |
| ASTM E 1216 : 1999 : R2005 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| ASTM E 1559 : 2003 | Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials |
| ASTM E 1234 : 2007 | Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft |
| ASTM E 1560 : 1995 : EDT 1 | Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers |
| ASTM E 2217 : 2012 | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| ASTM E 2088 : 2006 | Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.