ASTM E 2260 : 2021 : REV A
Current
The latest, up-to-date edition.
Standard Guide for Repointing (Tuckpointing) Historic Masonry
Hardcopy , PDF
English
10-25-2021
Committee |
E 06
|
DocumentType |
Guide
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This guide applies only to existing historic masonry construction. For purposes of this guide historic masonry is intended to refer to buildings that have significant historic, architectural, cultural or social meaning and are constructed of masonry materials. Similar techniques and evaluation should be employed for non-historic masonry, but are not addressed in this guide.
1.2This guide outlines procedures for repointing historic masonry and is intended to provide guidelines for the user to establish project-specific requirements for repointing of historic masonry.
1.3This guide only pertains to masonry units: brick, terra cotta, stone, cast stone, and concrete brick laid in mortar, and may or may not be appropriate for other masonry units.
1.4This guide addresses repointing (tuckpointing) as defined in 3.1.3.
1.5When considering repointing, especially on masonry of artistic, architectural, cultural, or historical significance, guidance from a specialist experienced in historic masonry and repointing should be sought.
1.6This guide does not address pointing styles or profiles used on masonry or the methods of producing them.
1.7Additional repairs that may impact the structural integrity of the masonry may necessitate that a structural stability analysis be completed prior to the execution of any work.
1.8Following this guide may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use.
1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1713 : 2017 | Standard Specification for Mortars for the Repair of Historic Masonry |
ASTM C 170/C170M : 2023 | Standard Test Method for Compressive Strength of Dimension Stone |
ASTM C 67/C67M : 2021 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
ASTM C 140/C140M : 2022 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 67/C67M : 2023 : REV A | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
ASTM C 270 : 1919 : REV A : EDT 1 | Standard Specification for Mortar for Unit Masonry |
ASTM C 140/C140M : 2023 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 1713 : 2023 | Standard Specification for Mortars for the Repair of Historic Masonry |
ASTM C 140/C140M : 2022 : REV B | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 780 : 2020 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
ASTM C 1713 : 2024 | Standard Specification for Mortars for the Repair of Historic Masonry |
ASTM C 140/C140M : 2018 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 67/C67M : 2023 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
ASTM C 780 : 2023 | Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
ASTM E 631 : 2015 : R2024 | Standard Terminology of Building Constructions |
ASTM C 1324 : 2020 : REV A | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
ASTM C 140/C140M : 2022 : REV C | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
ASTM C 140/C140M : 2020 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 140/C140M : 2024 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 140/C140M : 2020 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 140/C140M : 2023 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 170/C170M : 2024 | Standard Test Method for Compressive Strength of Dimension Stone |
ASTM C 170/C170M : 2024 : REV A | Standard Test Method for Compressive Strength of Dimension Stone |
ASTM C 780 : 2018 : REV A | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
ASTM C 780 : 2019 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
ASTM C 270 : 2024 | Standard Specification for Mortar for Unit Masonry |
ASTM C 140/C140M : 2022 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 140/C140M : 2021 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
ASTM C 170/C170M : 2017 | Standard Test Method for Compressive Strength of Dimension Stone |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.