ASTM E 1979 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
Available format(s)
Hardcopy , PDF
Superseded date
03-17-2023
Superseded by
Language(s)
English
Published date
05-16-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This practice covers an ultrasonic extraction procedure for the extraction of lead from environmental samples of interest in lead abatement and renovation (or related) work, for analytical purposes.
| Committee |
D 22
|
| DocumentType |
Standard Practice
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers an ultrasonic extraction procedure for the extraction of lead from environmental samples of interest in lead abatement and renovation (or related) work, for analytical purposes.
1.2Environmental matrices of concern include dry paint films, settled dusts, soils, and air particulates.
1.3Samples subjected to ultrasonic extraction are prepared for subsequent determination of lead by laboratory analytical methods.
1.4This practice includes, where applicable, descriptions of procedures for sample homogenization and weighing prior to ultrasonic extraction.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This practice does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establish appropriate safety and health practices and determine the applicability of regulatory limitation prior to use.
| ASTM E 3203 : 2021 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM E 2115 : 2022 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
| ASTM E 1583 : 2021 : REV A | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
| ASTM E 1729 : 2020 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
| ASTM E 2914/E2914M : 2021 | Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples |
| ASTM E 3193 : 2021 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM E 1727 : 2020 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM E 1583 : 2017 | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
| ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
| ASTM E 2115 : 2015 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM E 1728 : 2016 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 3193 : 2019 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM E 3203 : 2019 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM E 1605 : 2018 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM E 2914/E2914M : 2019 | Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples |
| ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 7144 : 2021 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids |
| ASTM E 1605 : 2022 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1775 : 2001 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1792 : 2001 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1726 : 2001 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 6785 : 2020 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1775 : 2016 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
| ASTM D 7144 : 2005 : REV A : R2011 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM E 1726 : 2021 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1729 : 1999 | Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM D 6785 : 2002 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1605 : 2001 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1728 : 1999 | Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques |
| ASTM D 6785 : 2008 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1727 : 2005 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014) |
| ASTM E 1726 : 2001 : R2009 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1729 : 2004 | Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM E 1726 : 2020 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 5438 : 2000 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM E 1605 : 2000 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1729 : 2016 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
| ASTM E 1728 : 2016 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 1605 : 2018 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1605 : 2018 : REV A | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1613 : 1999 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| ASTM E 1727 : 1999 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 1605 : 2001 : REV A | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1728 : 2002 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 1792 : 2002 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1729 : 2005 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination (Withdrawn 2014) |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM E 1605 : 2003 : EDT 1 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 5438 : 2005 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1728 : 2010 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 1775 : 2007 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM D 5438 : 2017 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM E 1605 : 2003 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1613 : 2004 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| ASTM E 1605 : 2018 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1792 : 2001 : EDT 1 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM E 1727 : 2004 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM E 1775 : 1996 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM D 5438 : 2011 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM E 1726 : 2016 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM E 1775 : 2007 : R2016 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM E 1792 : 1996 : REV A | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1605 : 2001 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1726 : 1995 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM D 7144 : 2005 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM E 1605 : 2002 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1728 : 2003 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM D 7144 : 2005 : REV A | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 7144 : 2005 : REV A : R2016 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.