ASTM E 177 : 2020
Current
The latest, up-to-date edition.
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
Hardcopy , PDF
English
10-01-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 11
|
| DocumentType |
Standard Practice
|
| Pages |
10
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1The purpose of this practice is to present concepts necessary to the understanding of the terms “precision” and “bias” as used in quantitative test methods. This practice also describes methods of expressing precision and bias and, in a final section, gives examples of how statements on precision and bias may be written for ASTM test methods.
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| API SPEC 13A:2019+ERR 1:2024 | Drilling Fluids Materials |
| ASTM E 1488 : 2012 : R2023 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 1488 : 2023 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 2587 : 2016 | Standard Practice for Use of Control Charts in Statistical Process Control |
| ASTM E 2587 : 2024 | Standard Practice for Use of Control Charts in Statistical Process Control |
| ASTM E 2586 : 2019 : R2024 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 2282 : 2023 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 2587 : 2007 : EDT 1 | Standard Practice for Use of Control Charts in Statistical Process Control |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 2587 : 2016 : R2021 : EDT 1 | Standard Practice for Use of Control Charts in Statistical Process Control |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 2282 : 2014 : R2019 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 1488 : 1996 | Standard Guide for Statistical Procedures to Use in Developing and Applying ASTM Test Methods |
| ASTM E 2282 : 2014 : R2023 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 2586 : 2019 : EDT 1 | Standard Practice for Calculating and Using Basic Statistics |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 1488 : 2012 : R2018 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.