ASTM E 176 : 2018 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology of Fire Standards
Available format(s)
Hardcopy , PDF
Superseded date
07-02-2021
Superseded by
Language(s)
English
Published date
12-15-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.This terminology covers terms, related definitions, and descriptions of terms used or likely to be used in fire-test-response standards, fire-hazard-assessment standards, and fire-risk-assessment standards.
| Committee |
E 05
|
| DocumentType |
Reference Material
|
| Pages |
27
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This terminology covers terms, related definitions, and descriptions of terms used or likely to be used in fire-test-response standards, fire-hazard-assessment standards, and fire-risk-assessment standards. Definitions of terms are special-purpose definitions that are consistent with the standard definitions but are written to ensure that a specific fire-test-response standard, fire-hazard-assessment standard, or fire-risk-assessment standard is properly understood and precisely interpreted.
Note 1:For additional information, refer to ASTM Policy on Fire Standards.2
1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3This fire standard cannot be used to provide quantitative measures.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1995 : 1998 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
| ASTM E 2032 : 2009 : R2017 | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 1474 : 1996 : REV A | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM E 1546 : 2015 | Standard Guide for Development of Fire-Hazard-Assessment Standards |
| ASTM E 1354 : 2010 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2226 : 2007 | Standard Practice for Application of Hose Stream |
| ASTM E 2061 : 2003 | Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 2335 : 2017 | Standard Guide for Laboratory Monitors |
| ASTM E 2058 : 2001 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM C 1224 : 2015 | Standard Specification for Reflective Insulation for Building Applications |
| ASTM E 2707 : 2015 | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
| ASTM E 2058 : 2006 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1740 : 2009 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
| ASTM E 1590 : 2002 | Standard Test Method for Fire Testing of Mattresses |
| ASTM E 2187 : 2004 | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
| ASTM E 1354 : 2014 : EDT 1 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2652 : 2016 | Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C |
| ASTM D 5865 : 2011 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2912 : 2013 | Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction |
| ASTM E 2187 : 2020 : REV A | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
| ASTM E 2573 : 2012 | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| ASTM E 2067 : 2002 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ASTM E 1590 : 1999 | Standard Test Method for Fire Testing of Mattresses |
| ASTM E 1317 : 2008 : REV A | Standard Test Method for Flammability of Marine Surface Finishes |
| ASTM E 1678 : 1997 | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM E 1509 : 1995 : R2000 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| ASTM E 2032 : 2007 : REV A | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 1822 : 2017 | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 2231 : 2002 : EDT 1 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 2653 : 2008 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories |
| ASTM E 2816 : 2012 | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 2280 : 2003 | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| ASTM C 1313 : 2005 | Standard Specification for Sheet Radiant Barriers for Building Construction Applications |
| ASTM E 3082 : 2017 | Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees |
| ASTM D 3675 : 2005 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 2226 : 2015 : REV B : R2019 | Standard Practice for Application of Hose Stream |
| ASTM E 2226 : 2002 | Standard Practice for Application of Hose Stream |
| ASTM E 2653 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories |
| ASTM E 1474 : 2014 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM E 2404 : 2012 | Standard Practice for Specimen Preparation and Mounting of Wall or Ceiling Coverings to Assess Surface Burning Characteristics |
| ASTM E 2749 : 2010 | Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens |
| ASTM E 1353 : 1999 | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| ASTM E 2307 : 2020 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM C 1224 : 2009 | Standard Specification for Reflective Insulation for Building Applications |
| ASTM E 2816 : 2017 | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 2058 : 2019 | Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 2187 : 2009 | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
| ASTM E 1321 : 1997 : REV A | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM E 2599 : 2009 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM E 2257 : 2013 : REV A | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 1740 : 2020 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
| ASTM E 2061 : 2009 | Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 1546 : 2009 : REV A | Standard Guide for Development of Fire-Hazard-Assessment Standards |
| ASTM E 1623 : 2000 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM D 3675 : 2009 : REV A | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 1354 : 2004 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1354 : 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2536 : 2015 | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
| ASTM E 1352 : 2002 | Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
| ASTM E 1623 : 2014 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1474 : 2001 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM D 3675 : 2009 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 1354 : 2010 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2652 : 2018 | Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C |
| ASTM E 1529 : 2000 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM E 2837 : 2013 | Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies |
| ASTM E 1995 : 2018 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
| ASTM E 1474 : 2020 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM E 1678 : 2015 | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM E 1474 : 2004 : EDT 1 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM E 1529 : 2016 : EDT 1 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM E 2816 : 2012 : REV A | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 1352 : 2008 : REV A | Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
| ASTM E 1740 : 2001 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
| ASTM E 1354 : 2003 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1537 : 2015 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM D 5865 : 2004 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1678 : 2002 | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM E 2336 : 2016 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM E 1529 : 2010 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM E 1623 : 2003 : REV A | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 2067 : 2000 : REV A | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ASTM E 2707 : 2014 | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
| ASTM E 1590 : 2017 | Standard Test Method for Fire Testing of Mattresses |
| ASTM E 2061 : 2002 : REV A | Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 2061 : 2001 : REV A | Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 2226 : 2015 | Standard Practice for Application of Hose Stream |
| ASTM E 2573 : 2007 | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| ASTM E 2226 : 2015 : REV B | Standard Practice for Application of Hose Stream |
| ASTM D 3675 : 2014 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 1354 : 2002 : REV D : EDT 1 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM C 1224 : 2001 | Standard Specification for Reflective Insulation for Building Applications |
| ASTM E 3048 : 2017 | Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel |
| ASTM D 5865 : 2000 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2102 : 2011 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2749 : 2010 : R2014 | Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens |
| ASTM E 2231 : 2014 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 2536 : 2015 : REV A | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
| ASTM E 1317 : 1997 : REV A : R2002 | Standard Test Method for Flammability of Marine Surface Finishes |
| ASTM E 1590 : 2016 | Standard Test Method for Fire Testing of Mattresses |
| ASTM E 2404 : 2009 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics |
| ASTM E 2230 : 2008 | Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material |
| ASTM E 1474 : 2002 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM E 2652 : 2009 : EDT 1 | Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750<span class='unicode'>°</span>C |
| ASTM D 5865 : 2013 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2404 : 2006 | Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics |
| ASTM E 2573 : 2007 : REV A | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| ASTM E 1509 : 2012 : R2017 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| ASTM E 1354 : 2008 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5865 : 2007 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5865 : 2003 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1537 : 2016 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 1354 : 2002 : REV D | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1317 : 1997 : REV A | Standard Test Method for Flammability of Marine Surface Finishes |
| ASTM E 2067 : 2015 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ASTM E 1529 : 2014 : REV A | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM D 5865 : 1998 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2231 : 2019 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 1474 : 2007 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM D 5865 : 2003 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1537 : 2002 : REV A | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 2336 : 2004 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM E 2230 : 2013 | Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material |
| ASTM E 2336 : 2004 : R2009 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM E 2957 : 2017 | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
| ASTM E 2653 : 2015 | Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories |
| ASTM E 2404 : 2015 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Characteristics |
| ASTM E 2226 : 2008 | Standard Practice for Application of Hose Stream |
| ASTM E 2690 : 2017 : REV A | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
| ASTM E 2336 : 2020 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM E 1822 : 2002 : REV B | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 1623 : 2004 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 2067 : 2003 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ASTM E 2257 : 2016 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 2187 : 2002 | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
| ASTM E 1678 : 2010 | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM E 1513 : 1993 : R2011 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 1529 : 2013 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM E 2058 : 2002 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1321 : 2008 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM E 2231 : 2007 : REV A | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 2061 : 2006 | Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 2837 : 2011 | Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies |
| ASTM D 5865 : 1999 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2187 : 2016 | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
| ASTM E 2335 : 2004 | Standard Guide for Laboratory Monitors |
| ASTM E 1354 : 2009 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2280 : 2017 | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| ASTM E 2231 : 2002 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 2688 : 2010 | Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics |
| ASTM E 2816 : 2018 : REV A | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 2257 : 2013 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 1317 : 2008 : REV B | Standard Test Method for Flammability of Marine Surface Finishes |
| ASTM E 2404 : 2013 | Standard Practice for Specimen Preparation and Mounting of Wall or Ceiling Coverings to Assess Surface Burning Characteristics |
| ASTM E 1353 : 2002 | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| ASTM E 1623 : 2002 : REV A | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 2061 : 2001 : EDT 1 | Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 2404 : 2005 | Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall Coverings to Assess Surface Burning Characteristics |
| ASTM E 2032 : 2008 : REV A | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 2257 : 2008 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 2307 : 2015 : REV B : EDT 1 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 1623 : 2002 : REV B | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1474 : 2004 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM E 1529 : 2006 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM E 2280 : 2003 : EDT 1 | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| ASTM E 1321 : 2018 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM E 2102 : 2013 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2599 : 2015 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM C 1224 : 1999 | Standard Specification for Reflective Insulation for Building Applications |
| ASTM E 2058 : 2013 : REV A | Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1537 : 2007 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 2280 : 2013 | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| ASTM D 5865 : 2011 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2599 : 2016 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM E 2536 : 2006 | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
| ASTM E 1546 : 2000 | Standard Guide for Development of Fire-Hazard-Assessment Standards |
| ASTM E 1529 : 2016 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM E 2307 : 2015 : REV A | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 1995 : 2008 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
| ASTM E 2957 : 2015 | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
| ASTM E 2032 : 2009 | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 1995 : 2004 : REV A | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
| ASTM C 1224 : 2011 | Standard Specification for Reflective Insulation for Building Applications |
| ASTM E 1354 : 2015 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2226 : 2010 | Standard Practice for Application of Hose Stream |
| ASTM E 2058 : 2002 : REV A | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 2404 : 2008 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics |
| ASTM E 2573 : 2019 | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| ASTM E 2061 : 2000 : REV B | Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 1354 : 2016 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1678 : 2008 | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM E 2231 : 2009 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 2307 : 2015 : REV B | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 2307 : 2010 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM D 3675 : 2001 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source |
| ASTM D 3675 : 2008 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 1353 : 2016 | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| ASTM E 2231 : 2007 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 1353 : 2008 : REV A : EDT 1 | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| ASTM E 2307 : 2004 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 3048 : 2016 | Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel |
| ASTM E 2816 : 2011 | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 2573 : 2017 | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| ASTM E 2187 : 2020 | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
| ASTM E 2690 : 2010 : EDT 2 | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
| ASTM E 1740 : 2015 | Standard Test Method for Determining the Heat Release Rate and Other<brk/> Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
| ASTM E 2749 : 2015 | Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens |
| ASTM E 2653 : 2014 | Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories |
| ASTM E 1355 : 1997 | Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models |
| ASTM E 2404 : 2013 : EDT 1 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact |
| ASTM E 2336 : 2004 : R2013 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM D 3675 : 2019 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 1740 : 2002 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
| ASTM E 1623 : 2011 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 2307 : 2019 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 1321 : 2013 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM E 2061 : 2009 : REV A | Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 2816 : 2015 : REV A | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 1355 : 2004 : REV A | Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models |
| ASTM E 1822 : 2002 : REV A | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 2187 : 2002 : REV B | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
| ASTM E 2816 : 2015 | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 1740 : 2000 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
| ASTM E 2837 : 2013 : R2017 | Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies |
| ASTM D 5865 : 2012 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1590 : 2012 | Standard Test Method for Fire Testing of Mattresses |
| ASTM E 2231 : 2018 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 2102 : 2015 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM D 3675 : 2016 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 2404 : 2010 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics |
| ASTM E 1355 : 2012 | Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models |
| ASTM E 1678 : 2008 : REV B | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM E 1353 : 2008 | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| ASTM E 1822 : 2009 | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 2599 : 2010 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM E 1354 : 2016 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2226 : 2011 | Standard Practice for Application of Hose Stream |
| ASTM E 2257 : 2017 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 1995 : 2016 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
| ASTM E 2226 : 2010 : EDT 1 | Standard Practice for Application of Hose Stream |
| ASTM E 2335 : 2008 | Standard Guide for Laboratory Monitors |
| ASTM E 2536 : 2009 | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
| ASTM E 3048 : 2019 : REV A | Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel |
| ASTM E 2652 : 2009 | Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750<span class='unicode'>°</span>C |
| ASTM E 2404 : 2015 : REV A | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
| ASTM E 1352 : 2008 | Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
| ASTM E 2187 : 2002 : REV A | Standard Test Method for Measuring the Ignition Strength of Cigarettes |
| ASTM E 1355 : 2005 : REV A | Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models |
| ASTM E 1354 : 2017 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2599 : 2011 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM E 2102 : 2008 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2749 : 2015 : REV A | Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens |
| ASTM E 1537 : 2002 | Standard Test Method for Fire Testing of Real Scale Upholstered Furniture |
| ASTM E 1740 : 2007 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
| ASTM E 2307 : 2015 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 2226 : 2015 : REV A | Standard Practice for Application of Hose Stream |
| ASTM E 2102 : 2011 : REV A | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 1740 : 2010 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
| ASTM E 1354 : 2002 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2404 : 2017 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
| ASTM E 2257 : 2003 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 1740 : 2020 : REV A | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
| ASTM D 5865 : 2001 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2061 : 2015 | Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 1590 : 2007 | Standard Test Method for Fire Testing of Mattresses |
| ASTM E 2067 : 2020 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ASTM E 1546 : 2000 : EDT 1 | Standard Guide for Development of Fire-Hazard-Assessment Standards |
| ASTM E 2652 : 2009 : REV A | Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750<span class='unicode'>°</span>C |
| ASTM E 1354 : 2015 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2067 : 2008 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ASTM E 2102 : 2014 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 1678 : 2008 : REV A | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM D 5865 : 2001 : REV A : EDT 1 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1740 : 2007 : REV A | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
| ASTM E 1537 : 1999 | Standard Test Method for Fire Testing of Real Scale Upholstered Furniture |
| ASTM E 1354 : 2011 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2061 : 2012 | Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 2102 : 2004 : REV A | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2749 : 2015 : REV A : R2019 | Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens |
| ASTM E 1590 : 2001 | Standard Test Method for Fire Testing of Mattresses |
| ASTM E 1354 : 2011 : REV B | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM C 1224 : 2003 | Standard Specification for Reflective Insulation for Building Applications |
| ASTM E 1529 : 2014 | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies |
| ASTM E 2058 : 2000 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 2058 : 2009 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 2688 : 2018 | Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics |
| ASTM E 2067 : 2012 | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| ASTM D 5865 : 2010 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1678 : 2009 | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM C 1313 : 2000 | Standard Specification for Sheet Radiant Barriers for Building Construction Applications |
| ASTM E 1822 : 2013 | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 1353 : 2008 : REV A | Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| ASTM E 1995 : 2012 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
| ASTM E 3048 : 2019 | Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel |
| ASTM E 2816 : 2018 | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 1354 : 2011 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2536 : 2014 | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
| ASTM E 2336 : 2014 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM E 2690 : 2010 | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
| ASTM D 3675 : 2017 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 1623 : 2001 : EDT 1 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 3082 : 2017 : EDT 1 | Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees |
| ASTM E 1352 : 1999 | Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies |
| ASTM E 1509 : 2012 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| ASTM E 1537 : 2013 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 1352 : 2016 | Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies (Withdrawn 2022) |
| ASTM E 1321 : 2009 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM D 5865 : 2007 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2816 : 2020 | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 2226 : 2012 | Standard Practice for Application of Hose Stream |
| ASTM C 1224 : 2015 : R2020 | Standard Specification for Reflective Insulation for Building Applications |
| ASTM E 1317 : 2019 | Standard Test Method for Flammability of Surface Finishes |
| ASTM E 1546 : 2009 | Standard Guide for Development of Fire-Hazard-Assessment Standards |
| ASTM E 2230 : 2002 | Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material |
| ASTM E 2688 : 2016 | Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics |
| ASTM E 1537 : 2012 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 2912 : 2017 | Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction |
| ASTM D 3675 : 2011 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM D 3675 : 2012 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ASTM E 2690 : 2017 | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
| ASTM E 1678 : 2007 | Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM D 5865 : 2002 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 3675 : 1998 | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source |
| ASTM E 2690 : 2017 : REV B | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
| ASTM D 5865 : 2001 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2690 : 2010 : EDT 1 | Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics |
| ASTM E 1474 : 2010 | Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ASTM E 1513 : 1993 : R2005 : EDT 1 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 2816 : 2020 : REV A | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 1509 : 2004 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| ASTM E 1546 : 2007 | Standard Guide for Development of Fire-Hazard-Assessment Standards |
| ASTM E 2599 : 2018 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM E 2231 : 2015 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 1355 : 2012 : R2018 | Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models |
| ASTM E 2061 : 2000 : REV A | Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
| ASTM E 2102 : 2000 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2102 : 2004 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2405 : 2005 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen (Withdrawn 2011) |
| ASTM E 2032 : 2009 : R2013 | Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 1995 : 2004 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
| ASTM E 2058 : 2003 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1822 : 2002 | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 2404 : 2007 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics |
| ASTM E 2599 : 2009 : REV A | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM E 1354 : 2004 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1822 : 2012 | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 1354 : 2013 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1354 : 2014 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1537 : 2001 | Standard Test Method for Fire Testing of Real Scale Upholstered Furniture |
| ASTM E 1317 : 2012 | Standard Test Method for Flammability of Marine Surface Finishes |
| ASTM E 1822 : 2007 | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 1513 : 1993 : R2000 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM E 2102 : 2009 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2404 : 2007 : REV A | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics |
| ASTM E 1623 : 2009 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 2102 : 2017 | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| ASTM E 2707 : 2009 | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
| ASTM E 1623 : 2016 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 2307 : 2004 : EDT 1 | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 1590 : 2013 | Standard Test Method for Fire Testing of Mattresses |
| ASTM D 5865 : 2010 : REV A : EDT 1 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2335 : 2012 | Standard Guide for Laboratory Monitors |
| ASTM E 2280 : 2009 | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| ASTM E 1355 : 2011 | Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models |
| ASTM D 5865 : 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 2816 : 2013 : REV A | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 2816 : 2013 | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 2032 : 1999 : EDT 1 | Standard Guide for Extension of Data From Fire Endurance Tests |
| ASTM E 2652 : 2012 | Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.