ASTM E 1563 : 1998 : R2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos
Hardcopy , PDF
02-11-2021
English
01-09-2013
CONTAINED IN VOL. 11.06, 2015 Explains procedures for obtaining laboratory data concerning the acute effects of a test material on embryos and the resulting larvae of echinoid embryos (sea urchins and sand dollars) during static 48- to 96-h exposures.
Committee |
E 50
|
DocumentType |
Guide
|
Pages |
22
|
ProductNote |
Reconfirmed 2012
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide covers procedures for obtaining laboratory data concerning the acute effects of a test material on embryos and the resulting larvae of echinoid embryos (sea urchins and sand dollars) during static 48- to 96-h exposures. These procedures have generally been used with U.S. East Coast (Arbacia punctulata and Strongylocentrotus droebachiensis ) (1)3 and West Coast species (Strongylocentrotus purpuratus, S. droebachiensis, and Dendraster excentricus) (2). The basic procedures described in this guide first originated in Japan and Scandanavia (3), and parallel procedures have been used with foreign species, especially in Japan and the Mediterranean (4). These procedures will probably be useful for conducting static acute toxicity tests with embryos of other echinoid species, although modifications might be necessary.
1.2Other modifications of these procedures might be justified by special needs or circumstances. Although using procedures appropriate to a particular species or special needs and circumstances is more important than following prescribed procedures, the results of tests conducted by using unusual procedures are not likely to be comparable with those of many other tests. The comparison of results obtained by using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting acute tests starting with embryos of echinoids.
1.3These procedures are applicable to most chemicals, either individually or in formulations, commercial products, or known mixtures. With appropriate modifications, these procedures can be used to conduct acute tests on temperature, dissolved oxygen, and pH and on such materials as aqueous effluents (see also Guide E1192), leachates, oils, particulate matter, surface waters and sediments (Annex A1). Renewal tests might be preferable to static tests for materials that have a high oxygen demand, are highly volatile, are rapidly transformed biologically or chemically in aqueous solution, or are removed from test solutions in substantial quantities by the test chambers or organisms during the test.
1.4Results of acute toxicity tests with echinoid embryos should usually be reported as the 50 % effect concentration (EC50) based on the total abnormally developed embryos and larvae. In some situations, it might only be necessary to determine whether a specific concentration is acutely toxic to embryos or whether the EC50 is above or below a specific concentration.
1.5This guide is arranged as follows:
Section | |
Scope | |
Referenced Documents | |
Terminology | |
Summary of Guide | |
Significance and Use | |
Apparatus | |
Facilities | |
Construction Materials | |
Test Chambers | |
Cleaning | |
Acceptability | |
Safety Precautions | |
Dilution Water | |
Requirements | |
Source | |
Treatment | |
Characterization | |
Test Material | |
General | |
Stock Solution | |
Test Concentration(s) | |
Test Organisms | |
Species | |
Age | |
Source of Embryos | |
Handling | |
Test Animal Source and Condition | |
Spawning and Fertilization | |
Quality | |
Procedure | |
Experimental Design | |
Dissolved Oxygen | |
Temperature | |
Beginning the Test | |
Feeding | |
Duration of Test | |
Biological Data | |
Control Performance | |
Other Measurements | |
Analytical Methods | |
Acceptability of Test | |
Calculation of Results | |
Report | |
Keywords | |
Annex | |
Sediment Tests |
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations. Specific precautionary statements are given in Section 7.
ASTM E 1525 : 2002 : R2014 | Standard Guide for Designing Biological Tests with Sediments |
ASTM E 729 : 1996 : R2014 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 1850 : 2004 : R2019 | Standard Guide for Selection of Resident Species as Test Organisms for Aquatic and Sediment Toxicity Tests |
ASTM E 1367 : 2003 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM E 1023 : 1984 : R2007 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
ASTM E 1391 : 2002 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing |
ASTM E 1706 : 2005 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM E 380 : 1993 | Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System) (Withdrawn 1997) |
ASTM E 1391 : 2003 : R2014 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
ASTM E 1525 : 1994 : REV A | Standard Guide for Designing Biological Tests with Sediments |
ASTM E 1023 : 1984 : R2014 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM E 1023 : 1984 : R2002 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
ASTM E 1706 : 2000 : EDT 1 | Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Fresh Water Invertebrates |
ASTM E 1706 : 2020 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM E 1391 : 1994 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing |
ASTM E 1391 : 2003 : R2008 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
ASTM E 1706 : 2000 | Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Fresh Water Invertebrates |
ASTM E 1706 : 2005 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM E 1192 : 1997 : R2008 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 1367 : 2003 : R2008 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM E 1023 : 1984 : R1996 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
ASTM E 1367 : 1992 | Standard Guide for Conducting 10-day Static Sediment Toxicity Tests with Marine and Estuarine Amphipods |
ASTM E 1391 : 2003 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
ASTM E 1192 : 1997 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 1367 : 2003 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM E 1706 : 2005 : R2010 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates (Withdrawn 2019) |
ASTM E 1525 : 2002 : R2008 | Standard Guide for Designing Biological Tests with Sediments |
ASTM E 1706 : 2000 : EDT 2 | Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM E 1192 : 1997 : R2003 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 1706 : 2004 | Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM E 729 : 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 1192 : 1997 : R2014 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 1706 : 2019 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM E 1525 : 2002 | Standard Guide for Designing Biological Tests with Sediments |
ASTM E 1367 : 1999 | Standard Guide for Conducting 10-day Static Sediment Toxicity Tests with Marine and Estuarine Amphipods |
ASTM E 1525 : 2002 : R2014 | Standard Guide for Designing Biological Tests with Sediments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.