ASTM E 1510 : 1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
Hardcopy , PDF
11-11-2014
English
01-01-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 03.06, 2015 Defines the installation and maintenance of fused silica capillary columns in gas chromatographs that are already retrofitted for their use.
| Committee |
E 13
|
| DocumentType |
Standard Practice
|
| Pages |
13
|
| ProductNote |
Reconfirmed 1995
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This practice is intended to serve as a general guide for the installation and maintenance of fused silica capillary columns in gas chromatographs which are already retrofitted for their use. This practice excludes information on:
1.1.1 Injection techniques.
1.1.2 Column selection.
1.1.3 Data acquisition.
1.1.4 System troubleshooting and maintenance.
1.2 For additional information on gas chromatography, please refer to Practice E260. For specific precautions, see Notes 1- 4.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety information see Section 6 and Notes 2 - 4.
| ASTM E 697 : 1996 : R2011 | Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography |
| ASTM D 7169 : 2018 | Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography |
| ASTM D 7807 : 2012 | Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection |
| ASTM D 7798 : 2015 | Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC) |
| ASTM D 5501 : 2012 : R2016 | Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography |
| ASTM D 7922 : 2014 | Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography |
| ASTM D 7164 : 2010 : R2015 | Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography |
| ASTM E 1747 : 1995 : R2011 | Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications |
| ASTM D 7096 : 2019 | Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography |
| ASTM D 5135 : 2016 : EDT 1 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
| ASTM D 7213 : 2015 | Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography |
| ASTM D 3525 : 2004 : R2016 | Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography |
| ASTM D 7920 : 2015 : EDT 1 | Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography |
| ASTM D 7833 : 2014 | Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography |
| ASTM D 7398 : 2011 : R2016 | Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography |
| ASTM D 7360 : 2016 | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration (Withdrawn 2023) |
| ASTM D 3465 : 2014 | Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
| ASTM D 7504 : 2018 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 6160 : 1998 : R2017 | Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography |
| ASTM D 6417 : 2015 | Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography |
| ASTM D 5917 : 2015 : R2019 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 4735 : 2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
| ASTM D 7593 : 2014 | Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography |
| ASTM D 7057 : 2018 | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard) |
| ASTM D 2163 : 2014 : R2019 | Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography |
| ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
| ASTM D 3760 : 2018 | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (Withdrawn 2022) |
| ASTM D 7871 : 2018 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number) |
| ASTM D 7500 : 2015 | Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography |
| ASTM D 6730 : 2001 : R2016 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography |
| ASTM E 1642 : 2000 : R2016 | Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
| ASTM D 6352 : 2015 | Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography |
| ASTM D 3524 : 2014 | Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography |
| ASTM D 7266 : 2013 : R2018 : EDT 1 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) |
| ASTM D 6142 : 2016 | Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography |
| ASTM D 6144 : 2017 | Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography |
| ASTM D 5060 : 2012 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
| ASTM D 5713 : 2014 : R2018 : EDT 1 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
| ASTM E 202 : 2018 | Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols |
| CGA P 9 : 2015 | THE INERT GASES: ARGON, NITROGEN, AND HELIUM |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
| CGA P 1 : 2015 | STANDARD FOR SAFE HANDLING OF COMPRESSED GASES IN CONTAINERS |
| CGA G 5.4 : 2012 | STANDARD FOR HYDROGEN PIPING SYSTEMS AT USER LOCATIONS |
| CGA P 12 : 2017 | SAFE HANDLING OF CRYOGENIC LIQUIDS |
| CGA V 7 : 2015 | STANDARD METHOD OF DETERMINING CYLINDER VALVE OUTLET CONNECTIONS FOR INDUSTRIAL GAS MIXTURES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.