ASTM E 125 : 1963 : R2003
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
Available format(s)
Hardcopy , PDF
Superseded date
01-15-2017
Superseded by
Language(s)
English
Published date
07-10-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 03.03, 2017 Defines types and degrees of discontinuities occurring in steel castings and other types of ferrous castings detectable by the dry powder magnetic particle method.
| Committee |
E 07
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This collection of reference photographs covers types and degrees of discontinuities occurring in steel castings and other types of ferrous castings detectable by the dry powder magnetic particle method.
1.2 These reference photographs are intended to assist in the classification of those discontinuities revealed in ferrous castings subjected to magnetic particle examination.
1.3 These reference photographs are intended to be used for purposes of comparison with the magnetic particle indications observed on actual castings.
| MSS SP 53 : 2012 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD |
| API 687 : 2001 : R2009 | ROTOR REPAIR |
| SAE J 420 : 2018 | MAGNETIC PARTICLE INSPECTION |
| I.S. EN ISO 10439:2002 | PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS |
| 08/30132226 DC : DRAFT MAR 2008 | BS ISO 13535 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - HOISTING EQUIPMENT |
| BS EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements |
| API 2CCU : 2017 | OFFSHORE CARGO CARRYING UNITS |
| 04/30126605 DC : DRAFT DEC 2004 | IEC 62256 ED.1 - HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - GUIDE FOR REHABILITATION AND PERFORMANCE IMPROVEMENT |
| API 618 : 2007 : R2016 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ASCE/SEI 19 10 : 2010 | STRUCTURAL APPLICATIONS OF STEEL CABLES FOR BUILDINGS |
| ASTM A 995 : 1998 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
| ASTM A 660 : 1996 : R2005 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| BS EN ISO 10439:2002 | Petroleum, chemical and gas service industries. Centrifugal compressors |
| IEC 62256:2017 | Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement |
| QQ-S-681 Revision F:1974 | FEDERAL SPECIFICATION STEEL CASTINGS |
| ENA TS 56-1 : ISSUE 2 1989 | FERRITIC STEEL VALVE CASTING |
| MIL-HDBK-728-4 Revision A:1993 | MAGNETIC PARTICLE TESTING |
| 96/706683 DC : MAY 96 | ISO 13707 RECIPROCATING COMPRESSORS FOR THE PETROLEUM AND GAS INDUSTRIES |
| MIL-STD-1252 Base Document:1975 | INERTIA FRICTION WELDING PROCESS, PROCEDURE AND PERFORMANCE QUALIFICATION |
| EEMUA 164 : 1993 | SEAL-LESS CENTRIFUGAL PUMPS - CLASS 1 |
| EEMUA 151 : 1987 | LIQUID RING VACUUM PUMPS AND COMPRESSORS |
| ASTM A 660 : 1996 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| ASTM A 660 : 1996 : R2001 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| ASTM E 543 : 2015 : REDLINE | Standard Specification for Agencies Performing Nondestructive Testing |
| IEC 62256:2017 RLV | Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement |
| BS EN ISO 13535:2001 | Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment |
| MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| BS 1113:1989 | Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers) |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASME B31.3:2016 | PROCESS PIPING |
| 10/30231432 DC : 0 | BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS |
| ESI 56-1 : ISSUE 2 | FERRITIC STEEL VALVE CASTINGS |
| ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
| AGMA 2004 : C | GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
| ASTM A 356/A356M : 2011 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
| API 613:2003 | SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 687 : 2001 | ROTOR REPAIR |
| I.S. EN ISO 10439-1:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015) |
| ASTM A 660/A660M : 2011 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| ASTM A 660/A660M : 2011 : R2016 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| ASTM A 781/A781M : 2018-02 | SPECIFICATION FOR CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE |
| ASTM A 660 : 1996 : R2010 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| ISO 10436:1993 | Petroleum and natural gas industries — General-purpose steam turbines for refinery service |
| BS EN ISO 14693:2003 | Petroleum and natural gas industries. Drilling and well-servicing equipment |
| ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
| NASA KSC SPEC Z 0013 : 1969 | PENETRANT, MAGNETIC PARTICLE AND ULTRASONIC INSPECTION REQUIREMENTS FOR, SPECIFICATION FOR |
| EEMUA 176 : 1998 | SPECIFICATION FOR STRUCTURAL CASTINGS FOR USE OFFSHORE |
| API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
| API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
| BS EN 62256:2017 | Hydraulic turbines, storage pumps and pump-turbines. Rehabilitation and performance improvement |
| AGMA 923 : B | METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
| MIL-A-11356 Revision F:1987 | ARMOR, STEEL, CAST, HOMOGENEOUS, COMBAT-VEHICLE TYPE (1/4 TO 8 INCHES, INCLUSIVE) |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 02/705659 DC : DRAFT APR 2002 | ISO/DIS 21049 - PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 681 : 1996 : R2010 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
| API 681 : 1996 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| EN 62256:2017 | Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement |
| I.S. EN 62256:2017 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - REHABILITATION AND PERFORMANCE IMPROVEMENT |
| ASCE/SEI 19 16 : 2016 | STRUCTURAL APPLICATIONS OF STEEL CABLES FOR BUILDINGS |
| API 7K CHINESE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
| ASTM A 356/A356M : 2011 : R2016 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
| ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
| ISO 14693:2003 | Petroleum and natural gas industries — Drilling and well-servicing equipment |
| EN ISO 14693:2003 | Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003) |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015) |
| EN ISO 13535:2000 | Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
| EN ISO 13631:2002 | Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
| EN ISO 10439:2002 | Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002) |
| API 618 : 2007 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 11PGT : 1992 | RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
| 15/30323626 DC : 0 | BS EN 62256 ED 2.0 - HYDRAULIC TURBINES; STORAGE PUMPS AND PUMP-TURBINES - REHABILITATION AND PERFORMANCE IMPROVEMENT |
| CEI EN 62256 : 2009 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - REHABILITATION AND PERFORMANCE IMPROVEMENT |
| API 680 : 1ED 87 | PACKAGED RECIPROCATING PLANT AND INSTRUMENT AIR COMPRESSORS FOR GENERAL REFINERY SERVICES |
| BS 5998:1983 | Specification for quality levels for steel valve castings |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| API 687 : 2001 : R2015 | ROTOR REPAIR |
| API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
| API 7K REDLINE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
| BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
| BS EN ISO 13631:2002 | Petroleum and natural gas industries. Packaged reciprocating gas compressors |
| PIP REDP003 : 2013 | DOCUMENTATION REQUIREMENTS FOR HIGH POWER CENTRIFUGAL PUMPS FOR WATER SERVICE |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.