ASTM E 10 : 2017-05
Current
Current
The latest, up-to-date edition.
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
Published date
05-01-2017
Sorry this product is not available in your region.
CONTAINED IN VOL. 03.01, 2017 Defines the determination of the Brinell hardness of metallic materials by the Brinell indentation hardness principle.
| Committee |
E 28
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| SAE AMS 5022 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 0.14 - 0.20C (SAE 1117) |
| API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| API 16C RUSSIAN : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
| CSA W47.1 : 2009 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| SAE AMS 5747 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| ASTM A 823 : 1999 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| SAE J 434 : 2017 | AUTOMOTIVE DUCTILE (NODULAR) IRON CASTINGS |
| DOD-F-24669-7 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS, CORROSION RESISTING, NAVAL STEAM TURBINE USE (METRIC) |
| API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
| API 5C6 RUSSIAN : 2012 | WELDING CONNECTIONS TO PIPE |
| SAE AMS 5441 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| MIL-P-60596 Revision B:1990 | PROJECTILE, HE, 8 INCH M106 METAL PARTS ASSEMBLY |
| MIL P 64008 : 0 | PROJECTILE, 155MM: XM825 METAL PARTS ASSEMBLY |
| MIL P 60547 : F | PROJECTILE, 105 MM, HE, M1 & M760 METAL PARTS ASSEMBLY |
| MIL-P-50345 Revision F:1994 | PROJECTILES,155MM:M483A1-M718/M741-M692/M731 METAL PARTS ASSEMBLY |
| MIL-DTL-45916 Revision C:2014 | INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| DOD-F-24669-2 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS - CHROMIUM MOLYBDENUM ALLOY (METRIC) |
| FF-B-575 Revision C:1970 | BOLTS, HEXAGON AND SQUARE |
| SAE J 1887 : 2018 | AUTOMOTIVE COMPACTED GRAPHITE IRON CASTINGS |
| MIL-H-6875 Revision H:1989 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| MIL-S-23284 Revision A:1990 | STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, COUPLINGS AND STOCKS (RUDDERS AND DIVING PLANES) |
| SAE AMS 4222 : 2017 | ALUMINUM ALLOY CASTINGS, SAND, MODERATE HEAT RESISTANCE 4.0CU - 2.0NI - 1.5MG - 0.12TI (242.0P) SOLUTION HEAT TREATED AND STABILIZED |
| MIL-H-21367 Revision E:1985 | HULL FITTINGS: CONNECTORS, ADAPTER, END SEALS, AND STUFFING TUBES FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLES |
| MIL-DTL-60547 Revision G:2008 | PROJECTILE, 105 MM, HE, M1 AND M760 - METAL PARTS ASSEMBLY |
| MIL-PRF-13803 Revision F:1996 | VALVE, GATE - DOUBLE-DISK, CAST-IRON OR STEEL |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| 13/30261096 DC : 0 | BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| 17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| 06/30125909 DC : DRAFT OCT 2006 | ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
| MIL A 46177 : B | ARMOR, STEEL PLATE & SHEET, WROUGHT, HOMOGENEOUS (1/8 TO LESS THAN 1/4 INCH THICK) |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| FF-B-584 Revision F:1989 | BOLTS, FINNED NECK, KEY HEAD, MACHINE, RIBBED NECK, SQUARE NECK, TEE HEAD |
| MIL-DTL-12560 Revision K:2013 | ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
| MIL-S-45933 Base Document:1971 | STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR |
| QQ N 00286 : F | NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| MIL P 60584 : A | PROJECTILE, 155MM, SMOKE, WP, M110 METAL PARTS ASSEMBLY |
| API 6A CHINESE : 2011 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| MIL-Q-45970 Revision A:1975 | QUALITY ASSURANCE FOR WEAPONS AND SUPPORT MATERIAL |
| 03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
| 08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| MIL-DTL-46193 Revision A:1998 | ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
| MIL-DTL-46100 Revision E:2008 | ARMOR PLATE, STEEL, WROUGHT, HIGH-HARDNESS |
| ASTM A 532/A532M : 2010 | Standard Specification for Abrasion-Resistant Cast Irons |
| SAE AMS 5704 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, FORGINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| I.S. EN ISO 17945:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| MIL-S-8844 Revision D:1987 | STEEL BAR, REFORGING STOCK AND MECHANICAL TUBING LOW ALLOY PREMIUM QUALITY |
| MIL I 45932 : 0 | INSERT, SCREW THREAD, THIN WALL, LOCK IN |
| SAE AMS 5712 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| ASTM A 2 : 2002 : R2008 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| API 11V1 :1995 | SPECIFICATION FOR GAS LIFT EQUIPMENT |
| SAE AMS 5010 : 2014 | STEEL BARS FREE-MACHINING COLD DRAWN (SAE 1212 OR SAE 1215) |
| SAE AMS 2303 : 2016 | STEEL CLEANLINESS, AIRCRAFT QUALITY, MARTENSITIC CORROSION-RESISTANT STEELS, MAGNETIC PARTICLE INSPECTION PROCEDURE |
| SAE AMS 5024 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137) |
| SAE AMS 5750 : 2017 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, NICKEL BASE - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5665 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
| AWS B4.0M : 2000 | STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
| AWS B4.0:2016 | STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
| SAE AMS 5886 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 50NI - 20CR - 20CO - 5.8MO - 2.2TI - 0.45AL CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 2100 DEGREES F (1149 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5771 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 7.0CR - 16.5 MO, SOLUTION HEAT TREATED |
| ASTM B 752 : 2006 : R2011 : EDT 1 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
| API 2W : 2006 : R2012 | SPECIFICATION FOR STEEL PLATES FOR OFFSHORE STRUCTURES, PRODUCED BY THERMO-MECHANICAL CONTROL PROCESSING (TMCP) |
| API 5C6 : 2006 : R2012 | PIPE WITH WELDED CONNECTORS |
| SAE AMS 4223 : 2015 | ALUMINUM ALLOY, CASTINGS, 4.5CU - 0.70AG - 0.30MN - 0.25MG - 0.25TI (A201.0-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| ASTM B 599 : 1992 : R2009 : EDT 1 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| SAE AMS 2355 : 2017 | QUALITY ASSURANCE, SAMPLING AND TESTING, ALUMINUM ALLOYS AND MAGNESIUM ALLOY, WROUGHT PRODUCTS (EXCEPT FORGING STOCK), AND ROLLED, FORGED, OR FLASH WELDED RINGS |
| SAE AMS 4434 : 2017 | MAGNESIUM ALLOY CASTINGS, SAND, 9.0AL - 2.0ZN (AZ92A-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM A 602 : 1994 : R2014 | Standard Specification for Automotive Malleable Iron Castings |
| ASTM A 125 : 1996 : R2001 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM B 427 : 2009 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM F 541 : 2012 : REDLINE | Standard Specification for Alloy Steel Eyebolts |
| ASTM B 427 : 2009 : R2015 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM A 47/A47M : 1999 : R2004 | Standard Specification for Ferritic Malleable Iron Castings |
| SAE AMS 4862 : 2016 | MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS 63CU - 24ZN - 6.2AL - 3.8MN - 3.0FE HIGH STRENGTH, AS CAST |
| ASTM A 47M : 1990 | Standard Specification for Ferritic Malleable Iron Castings [Metric] |
| ASTM B 599 : 1992 : R2014 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM B 945 :2006 | Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers |
| ASTM A 159 : 1983 : R2011 | Standard Specification for Automotive Gray Iron Castings |
| ASTM F 1314 : 2018 : REDLINE | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| ASTM B 945 : 2006 : R2014 | Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers |
| ASTM A 47/A47M : 1999 : R2009 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM B 599 : 1992 : R2003 : EDT 1 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM A 476/A476M : 2000 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| ASTM A 1 : 2000 : R2010 | Standard Specification for Carbon Steel Tee Rails |
| ASTM B 688 : 1996 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ASTM B 807/B807M : 2013 : REDLINE | Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys |
| ASTM A 834 : 1995 : R2001 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM F 1684 : 2006 : R2011 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM F 620 : 2011 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| ASTM A 395/A395M : 1999 : R2014 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM B 546 : 2004 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM A 834 : 1995 : R2015 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| DIN EN ISO 15156-2:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| MIL-DTL-63245 Revision C:2008 | Projectile 155 Millimeter: HE, Metal Parts Assembly, M795 |
| MIL A 12560 : H | ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
| NBR 16080 : 2013 | INTERNAL COMBUSTION ENGINES - CYLINDER LINERS ASSEMBLED IN THE BLOCK WITH OR WITHOUT CONTACT WITH THE COOLANT (WET AND DRY TYPE RESPECTIVELY) |
| MIL-S-63540 Revision C:1995 | STUD, SELF-CLINCHING GENERAL SPECIFICATION FOR |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
| MIL-DTL-18295 Revision F:1998 | CHAINS AND FITTINGS FOR FLEET MOORING |
| SAE AMS 5667 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE |
| MIL-P-13326 Revision D:1987 | PLATE, METAL, STEEL ALLOY; HEAT TREATED, HIGH STRENGTH; FOR WELDED STRUCTURES |
| MIL-W-63150 Base Document:1977 | WEAPONS AND SUPPORT MATERIAL STANDARD QUALITY ASSURANCE PROVISIONS FOR |
| CSA W47.1 : 2009 : R2014 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| ASTM A 1095 : 2015 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
| MIL-P-63208 Revision B:1985 | PROJECTILE, 105 MM, HEAT T, M622 METAL PARTS |
| CSA W47.1 : 2009 : INC : UPD 3 : 2011 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| API 6ACRA : 2015 : ERR 1 : 2015 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| SAE AMS 5713K : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4249B : 2012 (R2018) | ALUMINUM ALLOY CASTINGS 7.0SI - 0.58MG - 0.15TI - 0.06BE (D357.0-T6) SOLUTION AND PRECIPITATION HEAT TREATED (REQUIRING FATIGUE AND FRACTURE TOUGHNESS TESTING) |
| SAE AMS 5663 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| MIL-DTL-32332 Base Document:2009 | Armor Plate, Steel, Wrought, Ultra-High-Hardness |
| API 6A718 REDLINE : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| NFPA 1914 : 2002 | TESTING FIRE DEPARTMENT AERIAL DEVICES |
| ASTM B 719 : 2000 : R2009 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| DOD-STD-35-19 Revision A:1984 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM TERMINALS AND TERMINAL STRIPS |
| DOD-C-70514 Base Document:1985 | Cartridge, 120MM, Super Slug, Load, Assemble, and Pack |
| ASTM B 647 : 2010 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| API BULL 2S : 1995 | DESIGN OF WINDLASS WILDCATS FOR FLOATING OFFSHORE STRUCTURES |
| ASTM B 247M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
| MIL C 18295 : E | CHAIN AND FITTINGS FOR FLEET MOORINGS |
| MIL P 14852 : B | PROJECTILE, 105 MM ILLUMINATING, M314A3, METAL PARTS ASSEMBLY |
| ASTM A 942 : 1995 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells |
| SAE AMS 5442 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM B 277 : 1995 | Standard Test Method for Hardness of Electrical Contact Materials |
| SAE AMS 4335 : 2017 | FORGINGS, ALUMINUM ALLOYS, 2XXX AND 7XXX, HEAT-TREATED, FINISHED-PART PROPERTIES: SHORT-TRANSVERSE TENSILE PROPERTIES AND FRACTURE TOUGHNESS |
| MIL-P-70524 Base Document:1990 | PROJECTILE, 105 MM, HE, RA, XM913/XM927 WARHEAD INSULATION ASSEMBLY FOR |
| MIL-A-12545 Revision D:1989 | ALUMINUM ALLOY IMPACTS |
| MIL-S-12515 Revision C:1983 | SURFACE HARDENING, FLAME AND INDUCTION (FOR FERROUS ALLOYS) |
| ASTM F 765 : 1993 : R2017 | Standard Specification for Wildcats, Ship Anchor Chain |
| API 20C : 2015 | CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| MIL-A-46173 Base Document:1976 | ARMOR, STEEL, PLATE, WROUGHT, (ESR) (3/16 THROUGH 3 LINES, INCLUSIVE) |
| DOD-STD-35-36 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
| MIL-DTL-24231 Revision E:2013 | Connectors, Plugs, Receptacles, Adapters, Hull Inserts, and Hull Insert Plugs, Pressure-Proof, General Specification for |
| ASTM B 894 : 2017 : REDLINE | Standard Specification for ACuZinc5 |
| QQ-C-390 Revision B:1983 | COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
| ASTM A 833 : 2017 : REDLINE | Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASTM G 81 : 1997 : REV A : R2013 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| API SPEC 19TT : 2016 | SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT |
| MIL-P-60620 Revision D:1985 | PROJECTILE ASSEMBLY FOR CARTRIDGE, SMOKE, WP, 81MM, M375A1 |
| DOD-F-24669-3 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS AND BILLETS FOR NITRIDING (METRIC) |
| SAE AMS S 11310 : 1998 | STEEL BARS, CARBON, HOT ROLLED, FOR COLD SHAPING, INCLUDING COLD EXTRUSION |
| SAE AS 7101 : 2007 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM |
| SAE AMS 4873 : 2016 | ALUMINUM BRONZE ALLOY, SAND CASTINGS - 85CU - 11AL - 3.6FE - SOLUTION HEAT TREATED AND TEMPERED |
| SAE AMS 4634 : 2015 | ALUMINUM BRONZE BARS, RODS, AND FORGINGS, 90.5CU - 7.5AL - 1.9SI, STRESS RELIEVED |
| ASTM A 159 : 1983 : R2006 | Standard Specification for Automotive Gray Iron Castings |
| SAE AMS 4892 : 2017 | ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, AS CAST |
| SAE AMS 4617 : 2017 | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73, 7075-T73511, 7075-T73510), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED, AND OVERAGED |
| SAE AMS 5884 : 2016 | IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
| SAE AMS 4406 : 2018 | Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated |
| ISO 10433:1994 | Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
| SAE J 417 : 2018 | HARDNESS TESTS AND HARDNESS NUMBER CONVERSIONS |
| SAE AMS 4635 : 2015 | ALUMINUM BRONZE BARS, RODS, AND FORGINGS, 87CU - 9AL - 3FE, STRESS RELIEVED |
| SAE AMS 4632 : 2001 | ALUMINUM BRONZE BARS AND RODS 90CU - 8.5A1, HARD |
| SAE AMS 4420 : 2017 | MAGNESIUM ALLOY CASTINGS, SAND, 6AL - 3ZN (AZ63A-F), AS CAST |
| SAE AMS 7490 : 2014 | RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS |
| SAE AMS 4616 : 2012 | SILICON BRONZE BARS, RODS, FORGINGS, AND TUBING 92CU - 3.2SI - 2.8ZN - 1.5FE STRESS RELIEVED |
| SAE AMS 4111 : 2014 | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7049-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| MSS SP 118 : 2007 | COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
| ASTM B 648 : 2010 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM B 162 : 1999 : R2009 | Standard Specification for Nickel Plate, Sheet, and Strip |
| SAE AMS 5701 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 4614 : 2012 | BRASS FORGINGS, FREE CUTTING 60CU - 2.0PB - 37.5ZN AS FORGED (M10) (COMPOSITION SIMILAR TO UNS C37700) |
| API SPEC 2W:2006 | SPECIFICATION FOR STEEL PLATES FOR OFFSHORE STRUCTURES, PRODUCED BY THERMO-MECHANICAL CONTROL PROCESSING (TMCP) |
| SAE AMS S 6758 : 2017 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| ASTM F 2581 : 2012 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| SAE AMS 5706 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED |
| SAE AMS 5638 : 2015 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
| ASTM B 599 : 1992 : R1997 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM A 834 : 1995 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| SAE AMS 5754 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5755 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED |
| API 6AR : 1994 | RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM A 1038 : 2017 : REDLINE | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
| SAE AMS 7496 : 2012 | RINGS, FLASH WELDED CARBON AND LOW-ALLOY STEELS |
| ASTM A 476/A476M : 2000 : R2005 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| SAE AMS 2759 : 2014 | HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS |
| ASTM F 1586 : 2013 : EDT 1 | Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
| ASTM B 688 : 1996 : R2004 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ASTM F 620 : 2011 : R2015 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| SAE AMS 5700G : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED |
| ASTM B 168 : 2011(R2016) | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip |
| ASTM B 718 : 2000 : R2006 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM B 718 : 2000 : R2011 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM A 220/A220M : 1999 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 476/A476M : 2000 : R2014 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM B 749 : 2014 : REDLINE | Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products |
| ASTM F 1106 : 1987 : R2012 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM B 929 : 2017 : REDLINE | Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar |
| ASTM A 125 : 1996 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM A 602 : 1994 : R2009 | Standard Specification for Automotive Malleable Iron Castings |
| ASTM G 81 : 1997 : REV A : R2002 : EDT 1 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM F 2229 : 2012 : REDLINE | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM B 763/B763M : 2015 : REDLINE | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASTM F 561 : 2013 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN ISO 15156-2:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| I.S. EN ISO 10423:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| NF EN ISO 10423 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| API 7NRV : 2006 : R2012 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| ASTM B 277 : 1995 : R2006 | Standard Test Method for Hardness of Electrical Contact Materials |
| CSA W47.1 : 2009 : INC : UPD 7 : 2014 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| API TR 938-B : 2008 | USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY |
| SAE AMS 4417 : 2018 | CASTINGS, SAND, MAGNESIUM ALLOY, 1.5AG - 2.1DI - 0.08CU - 0.70ZR (EQ21A - T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM B 824 : 2017 : REDLINE | Standard Specification for General Requirements for Copper Alloy Castings |
| MIL-DTL-60584 Revision B:2006 | Projectile,155 Millimeter - Smoke, WP, Metal Parts Assembly, M110A2 |
| MIL-DTL-3241 Revision F:2010 | REELS, CABLE (REELS DR-5(), DR-7(), DR-B(), RC-453()/G, RL-159()/U) |
| MIL V 13803 : E | VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
| SAE AMS 4314 : 2012 | ALUMINUM ALLOY, RINGS, ROLLED OR FORGED 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T651, 2014-T652) SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED AND PRECIPITATION HEAT TREATED |
| MIL-P-63293 Revision B:1983 | PROJECTILE, 105 MM, HEAT T MP, M456A2 METAL PARTS ASSEMBLY |
| MIL-P-60646 Revision B:1984 | PROJECTILE, 105 MM, HEAT-T, M456A1 METAL PARTS |
| ASTM A 125 : 1996 : R2013 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| MIL-P-50585 Base Document:1970 | PROJECTILE 8 INCH, HE, M404 HARDWARE FOR |
| SAE MAM 5706 : 2003 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED |
| GGG-P-831 Revision F:1995 | PUNCHES; CENTER, DRIVE PIN, ALIGNING, AND PRICK |
| API 945:2003 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
| ASTM F 765 : 1993 : R1998 | Standard Specification for Wildcats, Ship Anchor Chain |
| A-A-52114 Revision A:1993 | MATTAX, WITH CARRIER |
| MIL-S-11310 Revision E:1976 | Steel Bars, Carbon, Hot Rolled, For Cold Shaping Including Cold Extrusion |
| API SPEC 20E : 2017 | ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| SAE AMS 2304 : 2015 | STEEL CLEANLINESS, SPECIAL AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| ASTM A 159 : 1983 : R2001 | Standard Specification for Automotive Gray Iron Castings |
| AGMA 2004 : C | GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
| ASTM A 47/A47M : 1999 : R2014 | Standard Specification for Ferritic Malleable Iron Castings |
| API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
| SAE AMS 4285 : 2017 | ALUMINUM ALLOY CASTINGS, CENTRIFUGAL, 7.0SI - 0.30MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| 04/301931 DC : DRAFT JAN 2004 | ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| AWWA C507 : 2015 | BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM) |
| ASTM B 505/B505M : 2018 : REDLINE | Standard Specification for Copper Alloy Continuous Castings |
| API 6ACRA : 2015 : INC : ADD 1 : 2017 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| ASTM G 81 : 1997 : REV A : R2007 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| MIL-P-45971 Base Document:1975 | PRODUCT ENGINEERING QUALITY ENGINEERING SYSTEM (PEQES) FOR WEAPONS AND SUPPORT MATERIAL |
| MIL-STD-1252 Base Document:1975 | INERTIA FRICTION WELDING PROCESS, PROCEDURE AND PERFORMANCE QUALIFICATION |
| ASTM A 1099/A1099M : 2017 | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels |
| SAE AMS 7482 : 1995 | STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED |
| MIL-C-19310 Revision A:1972 | COPPER-CHROMIUM-ALLOY CASTINGS |
| MIL P 70679 : 0 | PROJECTILE, 60MM, WP, XM722 BODY ASSEMBLY |
| MIL STD 1693 : A NOTICE 2 | FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES |
| SAE AMS 4440 : 1999 | MAGNESIUM ALLOY CASTINGS, SAND 3.5CE - 0.70ZR (EK41A-T5) PRECIPITATION HEAT TREATED |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| SAE AMS 5660 : 2015 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 34FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5891 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60NI - 22CR - 2.0MO - 14W - 0.35AL - 0.03LA, ANNEALED |
| SAE AMS 4676 : 2017 | NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
| DOD-S-63543 Base Document:1982 | STUD & ROD, THREADED, METRIC, GENERAL SPECIFICATION FOR |
| SAE AMS 4871 : 2010(S2015) | ALUMINUM BRONZE, CENTRIFUGAL AND CHILL CASTINGS, 85CU - 11AL - 3.6FE, SOLUTION HEAT TREATED AND TEMPERED |
| ASTM F 765 : 1993 : R2006 | Standard Specification for Wildcats, Ship Anchor Chain |
| ASTM A 395/A395M : 1999 : EDT 1 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| SAE J 2582 : 2018 | AUTOMOTIVE DUCTILE IRON CASTINGS FOR HIGH TEMPERATURE APPLICATIONS |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| API 2SF : 2013 | MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| SAE AMS 5877 : 2012 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
| SAE J 431 : 2018 | AUTOMOTIVE GRAY IRON CASTINGS |
| ASTM A 602 : 1994 : R2004 | Standard Specification for Automotive Malleable Iron Castings |
| SAE AMS 5854 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED |
| SAE AMS 5069 : 2001(S2016) | STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018) |
| SAE AMS 5772 E: 2016 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
| SAE AMS 4212 : 2016 | Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated |
| SAE AMS5751F : 1982(S2017) | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
| ASTM F 2581 : 2012 : R2017 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| SAE AMS5624F:1989(S2017) | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017) |
| SAE AMS 4225 : 2018 | ALUMINUM ALLOY, HEAT-RESISTANT, CASTINGS, 5.0CU - 1.5NI - 0.25MN - 0.25SB - 0.25CO - 0.20TI - 0.20ZR (203.0-T6), SOLUTION HEAT TREATED AND PRECIPITATION HEAT TREATED |
| SAE AMS 5962 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, ROUND BARS AND WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION TREATED AND WORK STRENGTHENED, PRECIPITATION HARDENABLE |
| SAE AMS 4107 : 2018 | ALUMINUM ALLOY DIE FORGINGS (7050-T74) SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4120 : 2018 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
| API 7 : 2001 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
| ASTM B 162 : 1999 : R2005 | Standard Specification for Nickel Plate, Sheet, and Strip |
| API 20B : 2013 | OPEN DIE SHAPED FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| API 5C6 : 2006 | PIPE WITH WELDED CONNECTORS |
| SAE AMS 2300 L : 2015 | STEEL CLEANLINESS, PREMIUM AIRCRAFT-QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
| API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
| SAE AMS 4231 : 1983 | CASTINGS, SAND - 4.5CU - 1.1SI, SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM B 718 : 2000 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM F 1684 : 2006 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM A 1 : 2000 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 823 : 1999 : R2008 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM A 880 : 1995 | Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) |
| ASTM B 719 : 2000 : R2014 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-<brk/>Iron-Silicon Alloy (UNS N06333) Bar |
| SAE AMS 4284 : 2017 | ALUMINUM ALLOY CASTINGS, PERMANENT MOLD, 7.0SI - 0.30MG (356.0-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM B 906 : 2002 : R2017 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B 277 : 1995 : R2001 | Standard Test Method for Hardness of Electrical Contact Materials |
| SAE AMS2658D:2016 | HARDNESS AND CONDUCTIVITY INSPECTION OF WROUGHT ALUMINUM ALLOY PARTS |
| ASTM F 1106 : 1987 : R1998 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
| ASTM B 906 :2002 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM B 906 : 2002 : R2006 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM F 961 : 2014 : REDLINE | Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| ASTM F 1684 : 2006 : R2016 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM B 100 : 2013 : REDLINE | Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use |
| ASTM B 168 : 2011 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, |
| ASTM A 2 : 2002 : R2014 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM B 719 : 2000 : R2005 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM G 81 : 1997 : REV A | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM E 110 : 2014 : REDLINE | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| ASTM A 909/A909M : 2006 : R2011 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| UNI EN ISO 11961 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| NACE SP 04 72 : 2015 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| API 14D : 1994 | SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
| API 6RS : 1ED 90 SUPP 1 | BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
| UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| MIL-STD-3049 Base Document:2013 | MATERIALS DEPOSITION, DDM: DIRECT DEPOSITION OF METAL FOR REMANUFACTURE, RESTORATION AND RECOATING |
| API 2SC : 2010 | MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| 03/305165 DC : DRAFT MAR 2003 | ISO 17078-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| ASTM A 125 : 1996 : R2007 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| CSA W47.1 : 2009 : INC : UPD 6 : 2013 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| SAE AMS 4163 : 2017 | ALUMINUM ALLOY, EXTRUSIONS 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511) SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS 5389 : 1987(R2017) | ALLOY CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 55NI - 16.5CR - 17MO - 4.5W - 5.8FE - 0.40V, SOLUTION HEAT TREATED |
| ASTM F 765 : 1993 : R2012 : EDT 1 | Standard Specification for Wildcats, Ship Anchor Chain |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| SAE AMS 2774 : 2016 | HEAT TREATMENT, WROUGHT NICKEL ALLOY AND COBALT ALLOY PARTS |
| API 16RCD RUSSIAN : 2005 | SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
| AGMA 923 : B | METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
| MIL-STD-1537 Revision C:2002 | Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method |
| SAE AMS 5702 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
| ASTM B 22/B22M : 2017 : REDLINE | Standard Specification for Bronze Castings for Bridges and Turntables |
| GG-C-1969 Revision A:1976 | CURETTE, MASTOID, SPRATT |
| MIL-A-11356 Revision F:1987 | ARMOR, STEEL, CAST, HOMOGENEOUS, COMBAT-VEHICLE TYPE (1/4 TO 8 INCHES, INCLUSIVE) |
| MIL H 24653 : 0 | HASP, HIGH SECURITY, SHROUDED FOR SHIPBOARD DOORS AND HATCHES USING HIGH AND MEDIUM SECURITY PADLOCK |
| A-A-51141 Revision A:1990 | PLATE, LAPPING |
| MIL-S-5000 Revision E:1982 | STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS AND REFORGING STOCK |
| ASTM A 395/A395M : 1999 : R2009 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 942 : 1995 : R2001 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells |
| ASTM B 648 : 2010 : R2015 : EDT 1 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM B 162 : 1999 | Standard Specification for Nickel Plate, Sheet, and Strip |
| SAE MAM 4427 : 2003 | MAGNESIUM ALLOY SAND CASTINGS 4.0Y - 2.3ND - 0.7ZR (WE43A - T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5671 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5711 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED |
| SAE AMS 2773 : 2013 | HEAT TREATMENT, CAST NICKEL ALLOY AND COBALT ALLOY PARTS |
| MIL-P-50535 Base Document:1970 | PROJECTILE, 155MM, HE, M449A1, BODY ASSEMBLY FOR |
| IFI 140 : 2000 | CARBON AND ALLOY STEEL WIRE, RODS AND BARS FOR MECHANICAL FASTENERS |
| API 6A718 : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| ASTM F 606/F606M : 2016 : REDLINE | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| API 5C6 CHINESE : 2006 | WELDING CONNECTIONS TO PIPE |
| MIL-I-46175 Revision A:1983 | |
| API 16R RUSSIAN : 2010 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| ASTM A 159 : 1983 : R2015 | Standard Specification for Automotive Gray Iron Castings |
| ASTM A 823 : 1999 : R2003 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| CSA W47.1 : 2009 : INC : UPD 4 : 2011 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| SAE AMS 5664 : 2017 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 4631 : 2017 | ALUMINUM BRONZE RODS, BARS, AND FORGINGS, 90.5CU - 7.5AL - 1.95: STRESS RELIEVED |
| 09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
| SAE AIR 4777 : 2013(R 2018) | NONDESTRUCTIVE INSPECTION (NDI) METHODS USED DURING PRODUCTION AND OPERATION OF AIRCRAFT WHEELS AND BRAKES |
| MIL-B-46066 Revision B:1983 | BANDS, ROTATING, COPPER ALLOY, CENTRIFUGAL CAST (FOR CRITICAL APPLICATIONS) |
| MIL A 46193 : 0 | ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
| SAE AMS 5668 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 7.0FE - 2.5TI - 1.0CB (NB) - 0.70AL, 2100 DEGREES F (1149 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| MIL-A-63547 Base Document:1982 | ALUMINUM ALLOY 7475, ROD |
| MIL-H-6088 Revision G:1991 | HEAT TREATMENT OF ALUMINIUM ALLOYS |
| DOD-F-24669-5 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS, BILLET AND WIRE (CHROMIUM NICKEL PHOSPHOROUS AND CHROMIUM NICKEL MANGANESE PHOSPHOROUS) LOW MAGNETIC PERMEABILITY |
| SAE AMS 5351 : 2017 | STEEL CASTINGS, SAND, CORROSION AND MODERATE HEAT RESISTANT, 13CR, NORMALIZED AND TEMPERED |
| MIL-R-10185 Revision E:1992 | RING, BREECH, STEEL FORGINGS FOR |
| AASHTO T 244 : 2014 | METHOD OF TEST FOR MECHANICAL TESTING OF STEEL PRODUCTS |
| API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ASTM A 220/A220M : 1999 : R2004 | Standard Specification for Pearlitic Malleable Iron |
| MIL P 14824 : B | PROJECTILE, H.E., 155MM, M107 METAL PARTS ASSEMBLY |
| API 2Y : 2006 : R2012 | SPECIFICATION FOR STEEL PLATES, QUENCHED-AND-TEMPERED, FOR OFFSHORE STRUCTURES |
| 08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| SAE AMS 5746 : 2012 | ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| API 5LC : 2015 | CRA LINE PIPE |
| SAE AMS 5708 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE FORGINGS, AND RINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREES F (1079 DEGREES C) SOLUTION HEAT TREATED |
| ASTM B 688 : 1996 : R2014 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| MIL-P-48323 Revision C:1984 | PROJECTILE, 8 INCH, HE, RA, M650 ROCKET MOTOR BODY ASSEMBLY |
| MIL S 13823 : C | STEEL, SHAPES, ROLLED OR FORGED, BARS, FLATS AND SPECIAL SECTIONS (FOR ARMOR) |
| NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| SAE AMS 4870 : 2012 | ALUMINUM BRONZE, CENTRIFUGAL AND CHILL CASTINGS 85CU - 11AL - 3.6FE AS CAST (COMPOSITION SIMILAR TO UNS C95420) |
| API SPEC 16RCD : 2015 | SPECIFICATION FOR ROTATING CONTROL DEVICES |
| SAE AMS 7721 : 2018 | LEAD ALLOY SHEET AND EXTRUSIONS, 93PB - 6.5SB - 0.50SN, AS FABRICATED |
| SAE AMS 4893 : 2017 | ALLOY CASTINGS, CORROSION AND HEAT-RESISTANT, 66NI - 29CU - 4.0SI, SOLUTION TREATED |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| API STD 6ACRA:2015 | AGE-HARDENED NICKEL-BASED ALLOYS FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| API 2S : 1995 : R2001 | DESIGN OF WINDLASS WILDCATS FOR FLOATING OFFSHORE STRUCTURES |
| ASTM A 909/A909M : 2006 : R2016 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| SAE AMS 4149 : 2016 | ALUMINUM ALLOY, DIE AND HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T74), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5662 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| API 11V1 : 1995 : R2008 | SPECIFICATION FOR GAS LIFT EQUIPMENT |
| SAE AMS 5661 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 42.5NI - 12.5CR - 5.8MO - 2.9TI - 0.015B - 35FE - CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4236 : 2015 | ALUMINUM ALLOY CASTINGS, 4.6CU - 0.35MN - 0.25MG - 0.22TI (A206.0-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 5714 : 2018 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
| SAE AMS 4313 : 2016 | ALUMINUM ALLOY, ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T351, 2219-T352) SOLUTION HEAT TREATED AND MECHANICALLY STRESS RELIEVED |
| API 5CT METRIC : 1995 | SPECIFICATION FOR CASING AND TUBING (METRIC UNITS) |
| API 20C CHINESE : 2009 | CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| SAE AMS 5769 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED |
| SAE AMS 5707 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| SAE AMS 2301 : 2015 | STEEL CLEANLINESS, AIRCRAFT QUALITY MAGNETIC PARTICLE INSPECTION PROCEDURE |
| SAE AMS 5768 : 2018 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED |
| NFPA 1904 : 1991 | AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS |
| API 942 : 2ED 82 | CONTROLLING WELD HARDNESS OF CARBON STEEL REFINERY EQUIPMENT TO PREVENT ENVIRONMENTAL CRACKING |
| SAE AMS 5670 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| ASTM B 846 : 2011-07 | TERMINOLOGY FOR COPPER AND COPPER ALLOYS |
| ASTM A 602 : 1994 : R2018 | Standard Specification for Automotive Malleable Iron Castings |
| ASTM F 1106 : 1987 : R2006 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
| ASTM F 139 : 2012 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| ASTM A 395/A395M : 1999 : R2018 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 1100 : 2016 | Standard Guide for Qualification and Control of Induction Heat Treating |
| ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| ASTM B 546 : 2004 : R2014 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM A 1 : 2000 : R2005 | Standard Specification for Carbon Steel Tee Rails |
| ASTM A 1058 : 2014 : REDLINE | Standard Test Methods for Mechanical Testing of Steel Products—Metric |
| ASTM A 823 : 1999 : R2012 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM A 1 : 2000 : R2018 | Standard Specification for Carbon Steel Tee Rails |
| ASTM B 752 : 2006 : R2011 : EDT 2 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
| ASTM A 47/A47M : 1999 : R2018 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| FF-S-1362 Revision A:2014 | STUD, PLAIN, GENERAL PURPOSE |
| ISO 17945:2015 | Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| ASTM A 532/A532M : 2010 : R2014 | Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM A 159 : 1983 : R1993 | Standard Specification for Automotive Gray Iron Castings |
| 03/301625 DC : DRAFT JAN 2003 | BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
| CSA W47.1 : 2009 : INC : UPD 2 : 2011 : FR | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
| ASTM A 602 : 1994 : R1998 | Standard Specification for Automotive Malleable Iron Castings |
| NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| SAE AMS 5080 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035) |
| API 945 : 2003 : R2008 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
| API 16C CHINESE : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
| SAE J 2477 : 2018 | AUTOMOTIVE AUSTEMPERED DUCTILE (NODULAR) IRON CASTINGS (ADI) |
| API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| CSA W47.1 : 2009 : INC : UPD 5 : 2012 | CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL |
| MIL-P-50537 Base Document:1970 | PROJECTILE 155mm, HE M449A1 HARDWARE FOR |
| BS EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| MIL-DTL-46177 Revision C:1998 | Armor, Steel Plate and Sheet, Wrought, Homogeneous (1/8 to Less Than 1/4 Inch Thick) |
| DOD-STD-35-121 Base Document:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, EYELETS, FERRULES, AND GROMMETS |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
| DIN EN ISO 17945:2015-08 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| API 16R : 1997 : R2010 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| MIL I 45916 : B | INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| MIL-S-46172 Revision A:1984 | STEEL FORGINGS |
| API 6A718 RUSSIAN : 2009 | NICKEL BASE ALLOY 718 (UNS N07718) FOR OIL AND GAS DRILLING AND PRODUCTION EQUIPMENT |
| MIL-T-13915 Revision E:1987 | TUBE, STEEL , SEAMLESS, FOR CANNONS AND RECOILLESS RIFLES |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| MIL-DTL-14824 Revision C:2007 | PROJECTILE 155 MM, HE, METAL PARTS ASSEMBLY, M107 |
| MIL-DTL-13823 Revision D:1998 | STEEL; SHAPES, ROLLED OR FORGED; BARS, FLATS AND SPECIAL SECTIONS (FOR ARMOR) |
| SAE AMS 5666H : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED |
| ASTM B 647 : 2010 : R2016 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| MIL-DTL-22606 Revision D:2011 | FLASK AND END PLUGS, COMPRESSED GAS - AIR, OXYGEN, AND NITROGEN |
| MIL-B-16166 Revision B:1972 | BRONZE, ALUMINUM, FORGINGS, HEAT TREATED |
| MIL STD 1867 : A | |
| N287.2-17 | Material requirements for concrete containment structures for nuclear power plants |
| SAE AMS 5758 : 2014 | ALLOY, CORROSION-RESISTANT, BARS, 20CR - 35NI - 35CO - 10MO, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM REMELTED, SOLUTION HEAT TREATED FOR WORK STRENGTHENING |
| MIL-P-70612 Revision A:1993 | PROJECTILE, 155MM, XM864 BASE ASSEMBLY FOR |
| 03/313799 DC : DRAFT AUG 2003 | ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| API 7NRV CHINESE : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| MIL-PRF-32269 Base Document:2007 | Perforated Homogeneous Steel Armor |
| ASTM A 220/A220M : 1999 : R2009 | Standard Specification for Pearlitic Malleable Iron |
| MIL-E-19141 Revision D:1984 | ELECTRODE, WELDING, SURFACING, IRON BASE ALLOY |
| MIL-STD-40002 Base Document:1991 | HEAT TREATMENT CODING SYSTEM, GENERAL |
| ASTM A 159 : 1983 | SPECIFICATION FOR AUTOMOTIVE GRAY IRON CASTINGS |
| MIL-Z-50976 Base Document:1971 | ZIRCONIUM SPONGE |
| MIL-DTL-14852 Revision D:2009 | PROJECTILE, 105 MM, ILLUMINATING, M314A3 AND PROJECTILE, 105 MM, INFRARED ILLUMINATING, M1064 METAL PARTS ASSEMBLY |
| SAE AMS 4444 : 2017 | MAGNESIUM ALLOY CASTINGS, SAND, 6.0ZN - 0.80ZR (ZK61A-T5), PRECIPITATION HEAT TREATED |
| IFI 153 : 2003 | STAINLESS STEEL WIRE AND RODS FOR MECHANICAL FASTENERS |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| SAE AMS 4275 : 2017 | CASTINGS, PERMANENT MOLD, 6.2SN - 1CU - 1NI, STRESS RELIEVED |
| SAE AMS 4677 : 2017 | NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
| SAE AMS 4633 : 2018 | BRONZE, ALUMINUM SILICON, RODS, BARS, AND FORGINGS 90CU - 7.0AL - 1.8SI DRAWN AND STRESS RELIEVED (HR50) |
| SAE AMS H 6088 : 2000 | HEAT TREATMENT OF ALUMINUM ALLOYS |
| SAE J 158 : 1986 | AUTOMOTIVE MALLEABLE IRON CASTINGS |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| SAE AMS 2728 : 2012 | HEAT TREATMENT OF WROUGHT COPPER BERYLLIUM ALLOY PARTS |
| SAE AMS 2368 : 2017 | SAMPLING AND TESTING OF WROUGHT TITANIUM RAW MATERIAL EXCEPT FORGINGS AND FORGING STOCK |
| SAE AMS 5703 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| API 7NRV : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| SAE AMS 5759M : 2015 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W |
| API 16R:1997 | SPECIFICATION FOR MARINE DRILLING RISER COUPLINGS |
| SAE AMS 4227 : 1988 | ALUMINUM ALLOY, CASTINGS SAND, 8.0CU 6.0MG 0.50MN 0.50NI, AS CAST |
| API 2Y : 2006 | SPECIFICATION FOR STEEL PLATES, QUENCHED-AND-TEMPERED, FOR OFFSHORE STRUCTURES |
| SAE AMS 4123 : 2011 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5852 : 2001 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BILLETS AND PREFORMS 55NI 15CR 17CO 5.0MO 3.5TI 4.0AI 0.025B, POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| ASTM B 719 : 2000 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| SAE AMS 4443 : 2017 | MAGNESIUM ALLOY, SAND CASTINGS, 4.5ZN - 0.75ZR (ZK51A-T5) PRECIPITATION HEAT TREATED |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASTM A 834 : 1995 : R2006 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM B 162 : 1999 : R2014 | Standard Specification for Nickel Plate, Sheet, and Strip |
| ASTM B 752 : 2006 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
| ASTM A 2 : 2002 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM B 367:2013 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM B 906 : 2002 : R2012 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM E 1187 : 1997 | Standard Terminology Relating to Conformity Assessment (Withdrawn 2006) |
| ASTM A 220/A220M : 1999 : R2014 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 897/A897M : 2016 : REDLINE | Standard Specification for Austempered Ductile Iron Castings |
| ASTM B 277 : 1995 : R2012 | Standard Test Method for Hardness of Electrical Contact Materials |
| ASTM B 718 : 2000 : R2016 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM A 909 : 2003 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| ASTM A 395/A395M : 1999 : R2004 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 125 : 1996 : R2013 : EDT 1 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ASTM A 834 : 1995 : R2011 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM F 621 : 2012 : R2017 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ASTM B 546 : 2004 : R2009 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe |
| ASTM A 942 : 1995 : R2012 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
| ASTM A 476/A476M : 2000 : R2018 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM A 476/A476M : 2000 : R2009 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM B 688 : 1996 : R2009 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ASTM A 942 : 1995 : R2007 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
| ASTM E 103 : 2017 : REDLINE | Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials |
| ASTM F 621 : 2012 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM A 909/A909M : 2006 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| ASTM A 942/A942M : 1995 : R2012 : EDT 1 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
| BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
| ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
| BS EN ISO 15156-2:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
| I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| ASME B107.9M : 1994 | WRENCHES, BOX, ANGLED, OPEN END, COMBINATION, FLARE NUT, AND TAPPET (METRIC SERIES) |
| ASME A112.3.1 : 2007 : R2012 | STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
| ASME A112.3.1 : 2007 | STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
| ASME A112.3.1 : 2007 : R2017 | STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ISO/IEC 17011:2004 | Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.