ASTM E 10 : 2001
NA
NA
Status of Standard is Unknown
Standard Test Method for Brinell Hardness of Metallic Materials
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-31-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
E 28
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
NA
|
| SupersededBy | |
| Supersedes |
1.1 This test method (Test Method A) covers the determination of the Brinell hardness of metallic materials, including methods for the verification of Brinell hardness testing machines (Test Method B) and the calibration of standardized hardness test blocks (Test Method C).
1.2 The values stated in SI units are to be regarded as the standard.
Note 1--In common terminology, the equivalent force in kgf is substituted for N.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM B 299/B299M : 2018 | Standard Specification for Titanium Sponge |
| ASTM A 1095 : 2015 : R2019 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
| ASTM B 688 : 2018 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08367) Plate, Sheet, and Strip |
| ASTM F 606/F606M : 2019 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| ASTM E 140 : 2012 : REV B : R2019 : EDT 1 | Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness |
| ASTM A 833 : 2019 | Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| ASTM F 688 : 2019 | Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035) |
| ASTM A 602 : 1994 : R2018 | Standard Specification for Automotive Malleable Iron Castings |
| ASTM B 100 : 2020 | Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use |
| ASTM F 3055 : 2014 : REV A | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM B 247 : 2020 | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B 367 : 2013 : R2017 | Standard Specification for Titanium and Titanium Alloy Castings |
| ASTM F 621 : 2012 : R2017 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM A 897/A897M : 2016 | Standard Specification for Austempered Ductile Iron Castings |
| ASTM F 2282 : 2018 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM A 823 : 1999 : R2019 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM A 47/A47M : 1999 : R2018 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM G 193 : 2020 : REV A | Standard Terminology and Acronyms Relating to Corrosion |
| ASTM F 961 : 2020 | Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
| ASTM B 647 : 2010 : R2016 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| ASTM F 620 : 2020 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
| ASTM B 807/B807M : 2020 | Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys |
| ASTM A 2 : 2002 : R2020 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
| ASTM A 370 : 2020 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 1100 : 2016 | Standard Guide for Qualification and Control of Induction Heat Treating |
| ASTM A 1038 : 2019 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
| ASTM B 505/B505M : 2018 | Standard Specification for Copper Alloy Continuous Castings |
| ASTM B 648 : 2010 : R2015 : EDT 1 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM F 139 : 2019 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
| ASTM A 125 : 1996 : R2018 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM A 159 : 1983 : R2020 | Standard Specification for Automotive Gray Iron Castings |
| ASTM A 1 : 2000 : R2018 | Standard Specification for Carbon Steel Tee Rails |
| ASTM B 599 : 2020 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and Strip |
| ASTM B 168 : 2019 | Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip |
| ASTM A 395/A395M : 1999 : R2018 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM A 220/A220M : 1999 : R2018 : EDT 1 | Standard Specification for Pearlitic Malleable Iron |
| ASTM E 1004 : 2017 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM A 532/A532M : 2010 : R2019 | Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM B 427 : 2009 : R2015 | Standard Specification for Gear Bronze Alloy Castings |
| ASTM F 561 : 2019 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ASTM B 894 : 2017 | Standard Specification for ACuZinc5 (Withdrawn 2022) |
| ASTM B 148 : 2018 | Standard Specification for Aluminum-Bronze Sand Castings |
| ASTM A 834 : 1995 : R2020 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM G 81 : 1997 : REV A : R2018 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ASTM A 942/A942M : 1995 : R2018 | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells |
| ASTM E 110 : 2014 | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| ASTM F 2924 : 2014 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM B 763/B763M : 2015 | Standard Specification for Copper Alloy Sand Castings for Valve Applications |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ASTM B 906 : 2019 | Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip |
| ASTM B 247M : 2020 | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| ASTM A 909/A909M : 2006 : R2016 | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
| ASTM F 2229 : 2021 | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| ASTM F 138 : 2019 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) |
| ASTM F 2581 : 2012 : R2017 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| ASTM E 103 : 2017 | Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials |
| ASTM B 22/B22M : 2017 | Standard Specification for Bronze Castings for Bridges and Turntables |
| ASTM F 765 : 1993 : R2017 | Standard Specification for Wildcats, Ship Anchor Chain |
| ASTM B 719 : 2020 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar |
| ASTM B 749 : 2020 | Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products |
| ASTM A 439/A439M : 2018 | Standard Specification for Austenitic Ductile Iron Castings |
| ASTM A 1099/A1099M : 2020 | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels |
| ASTM F 1314 : 2018 | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| ASTM B 945 : 2006 : R2014 | Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers |
| ASTM F 1106 : 1987 : R2018 | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
| ASTM B 162 : 1999 : R2019 | Standard Specification for Nickel Plate, Sheet, and Strip |
| ASTM B 929 : 2017 | Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM B 752/B752M : 2018 | Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application |
| ASTM B 271/B271M : 2018 | Standard Specification for Copper-Base Alloy Centrifugal Castings |
| ASTM A 476/A476M : 2000 : R2018 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM B 546 : 2019 | Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloy, Ni-Cr-Fe-Al Alloy, Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe |
| ASTM A 1058 : 2019 | Standard Test Methods for Mechanical Testing of Steel Products—Metric |
| ASTM F 1586 : 2013 : EDT 1 | Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
| ASTM F 1684 : 2006 : R2016 | Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM B 824 : 2017 | Standard Specification for General Requirements for Copper Alloy Castings |
| ASTM F 541 : 2012 : R2020 | Standard Specification for Alloy Steel Eyebolts |
| ASTM B 718 : 2000 : R2016 | Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.