ASTM D 972 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
12-23-2022
English
05-11-2016
CONTAINED IN VOL. 05.01, 2016 Defines the determination of the loss in mass by evaporation of lubricating greases and oils for applications where evaporation loss is a factor.
Committee |
D 02
|
DocumentType |
Redline
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This test method covers the determination of the loss in mass by evaporation of lubricating greases and oils for applications where evaporation loss is a factor. Evaporation loss data can be obtained at any temperature in the range from 100 °C to 150 °C (210 °F to 300 °F).
1.2The values stated in SI units are to be regarded as standard.
1.2.1Exception—The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
SAE AMS3052 | Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened |
MIL-DTL-17111 Revision E:2012 | FLUID, POWER TRANSMISSION |
MIL L 83767 : B | LUBRICATING OIL, VACUUM PUMP, MECHANICAL |
MIL L 6085 : C | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
MIL-PRF-46002 Revision D:2010 | PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED |
VV-L-800 Revision C:1983 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE, (WATER-DISPLACING, LOW TEMPERATURE) |
MIL L 14107 : C | LUBRICATING OIL, WEAPONS, LOW TEMPERATURE |
MIL-PRF-47009 Revision D:2006 | COMPOUND, SILICONE, HEAT SINK |
ASTM D 6185 : 2011 | Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases |
ASTM D 2226 : 1993 : R2007 | Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use |
ASTM F 2489 : 2006 | Standard Guide for Instrument and Precision Bearing Lubricants-Part 2 Greases |
DEFSTAN 91-93/2(2001) : 2001 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC: CORROSION INHIBITED, MARITIME JOINT SERVICE DESIGNATION: OX-22 |
DEFSTAN 91-101/3(2001) : 2001 AMD 1 2002 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST NATO CODE: O-156 JOINT SERVICE DESIGNATION: OX-27 AND OX-28 |
MIL-PRF-8188 Revision D:1997 | CORROSION-PREVENTIVE, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
MIL L 46000 : C | LUBRICANT, SEMI-FLUID (AUTOMATIC WEAPONS) |
MIL C 47009 : B | COMPOUND, SILICONE, HEAT SINK |
MIL-DTL-3918 Revision B:2011 | LUBRICATING OIL, INSTRUMENT, JEWEL BEARING |
MIL-PRF-63460 Revision F:2017 | Cleaner, Lubricant, and Preservative for Weapons and Weapons Systems |
MIL-PRF-6083 Revision G:2013 | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
MIL G 10924 : F | GREASE, AUTOMOTIVE AND ARTILLERY |
MIL H 6083 : E | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
MIL-DTL-53131 Revision A:1998 | LUBRICATING OIL, PRECISION ROLLING ELEMENT BEARING, POLYALPHAOLEFIN BASED |
MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
MIL-PRF-85336 Revision B:1998 | LUBRICANT, ALL-WEATHER (AUTOMATIC WEAPONS) |
MIL L 7870 : B | LUBRICATING OIL, GENERAL PURPOSE, LOW TEMPERATURE |
MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
MIL H 46170 : B | HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE |
MIL-PRF-3150 Revision E:2008 | LUBRICATING OIL, PRESERVATIVE, MEDIUM |
MIL-H-81019 Revision D:1984 | HYDRAULIC FLUID, PETROLEUM BASE, ULTRA-LOW TEMPERATURE |
ASTM D 2878 : 2010 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
MIL-PRF-32538 Base Document:2015 | LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE, NATO CODE NUMBER: O-165 |
MIL-G-14931 Base Document:1968 | GREASE, SILICONE FOR USE WITH AMMUNITION |
MIL-PRF-6085 Revision E:2011 | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
MIL-C-82822 Base Document:1989 | CATALYST, BURNRATE |
SAE AS 6171/10 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY THERMOGRAVIMETRIC ANALYSIS (TGA) TEST METHODS |
ASTM D 2226 : 1993 : R2002 | Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use |
ASTM F 2489 : 2006 : R2013 | Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases |
ASTM D 2595 : 2017 | Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range |
MIL-DTL-83767 Revision C:2007 | Lubricating Oil, Vacuum Pump, Mechanical |
MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
DOD-PRF-85734 Revision A:2004 | LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE |
MIL-PRF-87100 Revision A:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, POLYPHENYL ETHER BASE |
MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
MIL-G-81937 Revision A:1984 | GREASE, INSTRUMENT, ULTRA CLEAN, METRIC |
MIL-PRF-83363 Revision E:2014 | GREASE, TRANSMISSION, HELICOPTER (NATO G-396) |
MIL G 46178 : 0 | GREASE, HELICOPTER, DRIVE SHAFT COUPLING |
MIL L 53131 : 0 | LUBRICATING OIL, PRECISION ROLLING ELEMENT BEARING, POLYALPHAOLEFIN BASED |
SAE AS5780D | Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants |
ASTM D 4732 : 2013 : REDLINE | Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
DEFSTAN 91-48/2(1997) : 1997 | HYDRAULIC FLUID, PETROLEUM: SUPERCLEAN NATO CODE: H-515 JOINT SERVICE DESIGNATION: OM-15 HYDRAULIC FLUID, PETROLEUM: NORMAL NATO CODE: H-520 JOINT SERVICE DESIGNATION: OM-18 |
SAE AIR81D | Importance of Physical and Chemical Properties of Aircraft Hydraulic Fluids |
MIL-PRF-7870 Revision E:2015 | LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) |
MIL C 8188 : C | CORROSION PREVENTIVE OIL, GAS TURBINE ENGINE, AIRCRAFT SYNTHETIC BASE |
MIL F 17111 : B | FLUID, POWER TRANSMISSION |
MIL-I-23310 Revision B:1984 | INHIBITORS, CORROSION, VOLATILE, OIL TYPE |
ASTM D 2226 : 1993 : R1998 | Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use |
MIL-PRF-46170 Revision E:2013 | HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544 |
MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
DEFSTAN 80-142/2(2002) : 2002 | CORROSION PREVENTIVE: HYDRAULIC SYSTEM NATO CODE: C-635 JOINT SERVICE DESIGNATION: PX-26 |
SAE AMS3054C | Oil, Lubricating, Low Temperature For -55 °C (-67 °F) Service |
ASTM D 2226 : 1993 : R2018 | Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use |
ASTM D 6185 : 2011 : R2017 | Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases |
ASTM D 2226 : 1993 : R2012 | Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use |
SAE AMSL81846 | Lubricating Oil, Instrument, Ball Bearing, High Flash Point |
MIL-L-27502 Base Document:1972 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, ESTER BASE |
MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
MIL-PRF-32033 Revision A:2016 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE (WATER-DISPLACING, LOW TEMPERATURE) |
SAE J2695_200508 | Heavy Duty Vehicle Lubricating Greases |
DEFSTAN 80-142/1(1995) : 1995 | CORROSION PREVENTIVE, HYDRAULIC SYSTEM NATO CODE: C-635 JSP: PX-26 |
ASTM D 2878 : 2010 : R2016 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
DEFSTAN 91-49/1(1980) : 1980 | LUBRICATING OIL, INSTRUMENT: SYNTHETIC NATO CODE NO. O-147 JOINT SERVICE DESIGNATION: OX-14 |
ASTM F 2161 : 2010 : REDLINE | Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils |
BS 8081:1989 | Code of practice for ground anchorages |
ASTM E 2251 : 2014 : REDLINE | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
ASTM D 217 : 2017 : REDLINE | TEST METHODS FOR CONE PENETRATION OF LUBRICATING GREASE |
ASTM D 2595 : 2017 | Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.