ASTM D 910 : 2017-05
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECIFICATION FOR LEADED AVIATION GASOLINES
Superseded date
01-28-2020
Superseded by
Published date
05-01-2017
Sorry this product is not available in your region.
CONTAINED IN VOL. 05.01, 2017 Defines formulating specifications for purchases of aviation gasoline under contract and is intended primarily for use by purchasing agencies.
| Committee |
D 02
|
| DevelopmentNote |
SUPERSEDES SAE AMS 3032, SAE AMS 3034, AND SAE AMS 3036. (07/1999) Supersedes MIL G 5572. (07/2004)
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SAE AMS 3034 : B NONCURRENT | Similar to |
| SAE AMS 3036 : 1992 | Similar to |
| MIL-PRF-81380 Revision F:2015 | FILTER/MONITOR, CONTAMINATION, HELICOPTER IN-FLIGHT REFUELING SYSTEM |
| MIL-A-53100 Base Document:1990 | ARCTIC FUEL SYSTEM SUPPLY POINT (AFSSP) |
| SAE AIR 744 : 2015 | AEROSPACE AUXILIARY POWER SOURCES |
| MIL-DTL-83054 Revision C:2003 | BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
| MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
| MIL-I-82799 Base Document:1989 | INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE |
| MIL-PRF-25439 Revision C:2013 | TRANSMITTER RATE OF FLOW, IN-FLIGHT REFUELING, 0-10,000 PPM, TYPE MB-3 |
| SAE ARP 5794 : 2014 | CENTRIFUGAL AIRCRAFT FUEL PUMP REQUIREMENTS, DESIGN AND TESTING, AEROSPACE STANDARD |
| ASTM D 3149 : 2006 | Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation |
| MIL-DTL-25038 Revision J:2012 | WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| ASTM D 4865 : 2009 : R2014 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM D 4529 : 2017 : REDLINE | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| MIL-DTL-5578 Revision D:2008 | TANKS, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| SAE AMS 3683 : 2017 | TUBING, IRRADIATED MODIFIED FLUOROPOLYMER PLASTIC, ELECTRICAL INSULATION FLAME RESISTANT, FLEXIBLE, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO |
| MIL-PRF-46194 Revision A:1997 | FOAM, RIGID, STRUCTURAL, CLOSED CELL |
| API 1543 : 2009 | DOCUMENTATION, MONITORING AND LABORATORY TESTING OF AVIATION FUEL DURING SHIPMENT FROM REFINERY TO AIRPORT |
| MIL-DTL-25516 Revision F:2004 | CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-17563 Revision C:1992 | IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
| MIL-DTL-38195 Revision D:2000 | Generator Set, Gas Turbine Engine, 60 KW 400 Hertz, General Purpose |
| SAE AIR5691A : 2017 | GUIDANCE FOR THE DESIGN AND INSTALLATION OF FUEL QUANTITY INDICATING SYSTEMS |
| MIL-PRF-32278 Revision B:2008 | GAUGE, TACTICAL AUTOMATED TANK (TATG) - FUELS OPERATIONAL READINESS CAPABILITY EQUIPMENT (FORCE) |
| MIL-B-53102 Base Document:1990 | BERM LINER ASSEMBLIES, ARCTIC SERVICE |
| MIL W 83420 : E | WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL |
| MIL-H-53073 Revision B:1993 | HOSE ASSEMBLY, ELASTOMERIC: FUEL DISCHARGE, COLLAPSIBLE |
| ASTM D 3343 : 2016 : REDLINE | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
| ASTM D 7464 : 2014 : REDLINE | Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| FAA AC 20-43 : C | AIRCRAFT FUEL CONTROL |
| MIL H 53064 : A | HOSE ASSEMBLY, ELASTOMER, LIGHTWEIGHT, COLLAPSIBLE - LIQUID FUEL |
| ASTM F 2501 : 2006 | Standard Practices for Unmanned Aircraft System Airworthiness (Withdrawn 2015) |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| MIL-DTL-7899 Revision D:2014 | Valve, Check, Aircraft Fuel System |
| MIL-PRF-53013 Revision B:1999 | Repair Kit, 6-Inch Hoseline |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| JSSG-2001 Revision B:2004 | Air Vehicle |
| SAE AMS 3632 : 2011 | TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO |
| SAE ARP 1616 : 2017 | SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL AND OIL SYSTEMS |
| SAE AMS PRF 46194 : 2016 | FOAM, RIGID, STRUCTURAL, CLOSED CELL |
| CSA B836 : 2014 | STORAGE, HANDLING, AND DISPENSING OF AVIATION FUELS AT AERODROMES |
| ASTM D 3144 : 2000 : R2006 | Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM D 2386 : 2015 | Standard Test Method for Freezing Point of Aviation Fuels |
| ASTM D 3149 : 2006 : R2013 | Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation (Withdrawn 2020) |
| MIL-PRF-52747 Revision F:1996 | NOZZLE ASSEMBLY, CLOSED-CIRCUIT REFUELING, STANDARD AND ARCTIC SERVICE |
| MIL-PRF-32148 Base Document:2005 | FILTER SEPARATOR ELEMENTS, FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD |
| ASTM D 4858 : 2013 : REDLINE | Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines |
| MIL-STD-2161 Revision C:2014 | Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
| SAE AS 5729 : 2016 | O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL |
| MIL-STD-457 Revision B:1989 | FREQUENCY FOR INSPECTION AND CLEANING OF PETROLEUM FUEL OPERATING AND STORAGE TANKS |
| SAE AIR 4170 : 2016 | RETICULATED POLYURETHANE FOAM EXPLOSION SUPPRESSION MATERIAL FOR FUEL SYSTEMS AND DRY BAYS |
| SAE AS 5877 : 2016 | DETAILED SPECIFICATION FOR AIRCRAFT PRESSURE REFUELING NOZZLE |
| CSA B836:14 (R2019) | Storage, handling, and dispensing of aviation fuels at aerodromes |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| ASTM D 3144 : 2000 : R2013 : EDT 1 | Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation |
| SAE AIR 786 : 2014 | ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| EI MODEL CODE SAFE PRACTICE PT7 : 1998 | DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES |
| EI 1542 : 2012 | IDENTIFICATION MARKINGS FOR DEDICATED AVIATION FUEL MANUFACTURING AND DISTRIBUTION FACILITIES, AIRPORT STORAGE AND MOBILE FUELLING EQUIPMENT |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| MIL-F-26301 Revision H:2014 | FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR |
| MIL-DTL-9129 Revision G:2014 | Discharges, Electrostatic General Specification for |
| SAE ARP 5818 : 2015 | AIRCRAFT REFUELING VEHICLE DESIGN AND PERFORMANCE REQUIREMENTS |
| ASTM D 1405/D1405M : 2008 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| MIL-STD-2223 Base Document:1992 | TEST METHODS FOR INSULATED ELECTRIC WIRE |
| MIL-HDBK-844 Revision B:2014 | AIRCRAFT REFUELING HANDBOOK FOR NAVY/MARINE CORPS AIRCRAFT |
| MIL H 53063 : A | HOSE ASSEMBLY, ELASTOMER LIGHTWEIGHT NONCOLLAPSIBLE, FUEL |
| MIL-STD-3013 Revision A:2008 | GLOSSARY OF DEFINITIONS, GROUND RULES, AND MISSION PROFILES TO DEFINE AIR VEHICLE PERFORMANCE CAPABILITY |
| ASTM D 3144 :2000 | Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation |
| ASTM D 4865 : 2009 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| MIL-A-53099 Base Document:1990 | ARCTIC FORWARD AREA REFUELLING EQUIPMENT (AFARE) |
| MIL-T-6598 Revision F:1994 | TRANSMITTER, RATE OF FLOW, FUEL, SYNCHRO STYLE TYPE J 6A |
| MIL-DTL-83420 Revision P:2017 | WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR |
| SAE AMS 3593 : 2017 | TUBING, PLASTIC, ELECTRICAL INSULATION, IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE, MARKER SLEEVING GRADE, LOW OUTGASSING |
| SAE AIR 5774 : 2012 | COMPOSITE FUEL TANKS, FUEL SYSTEM DESIGN CONSIDERATIONS |
| ASTM D 1405/D1405M : 2008 : R2013 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019) |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM D 7960 : 2018 : REDLINE | Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components |
| SAE AIR 7484 : 2018 | GUIDANCE ON THE IMPACT OF FUEL PROPERTIES ON FUEL SYSTEM DESIGN AND OPERATION |
| ASTM D 5059 : 2014-07 | TEST METHODS FOR LEAD IN GASOLINE BY X-RAY SPECTROSCOPY |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| ASTM D 2624 : 2015 : REDLINE | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ASTM D 4529 : 2017 : REDLINE | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ASTM D 2386 : 2015 | Standard Test Method for Freezing Point of Aviation Fuels |
| ASTM D 2392 : 2015 : REDLINE | Standard Test Method for Color of Dyed Aviation Gasolines |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 3341 : 2016 : REDLINE | Standard Test Method for Lead in Gasoline—Iodine Monochloride Method |
| ASTM D 5191 : 2015-10 | TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.