ASTM D 91 : 2002 : R2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Precipitation Number of Lubricating Oils
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
05-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 05.01, 2017 Defines the determination of the precipitation number of steam cylinder stocks and black oils, and can be used for other lubricating oils.
| Committee |
D 02
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method covers the determination of the precipitation number of steam cylinder stocks and black oils, and can be used for other lubricating oils.
1.2 The values stated in acceptable SI units are to be regarded as the standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL-DTL-17111 Revision E:2012 | FLUID, POWER TRANSMISSION |
| VV B 680 : C | BRAKE FLUID, AUTOMOTIVE |
| DEFSTAN 91-47/1(1980) : 1980 | LUBRICATING OIL, GENERAL PURPOSE: LOW TEMPERATURE NATO CODE NO. O-142 JOINT SERVICE DESIGNATION: OM-12 |
| MIL L 6085 : C | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
| MIL P 5516 : C | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F |
| MIL-PRF-46002 Revision D:2010 | PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED |
| MIL B 46176 : A | BRAKE FLUID, SILICONE, AUTOMOTIVE, ALL WEATHER, OPERATIONAL AND PRESERVATIVE, METRIC |
| VV L 001071 : A NOTICE 1 | LUBRICATING OIL, STEAM CYLINDER, MINERAL |
| VV-L-800 Revision C:1983 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE, (WATER-DISPLACING, LOW TEMPERATURE) |
| MIL C 14055 : E | CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER |
| MIL L 14107 : C | LUBRICATING OIL, WEAPONS, LOW TEMPERATURE |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ASTM D 3520 : 2004 | Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method) (Withdrawn 2008) |
| ASTM D 4871 : 2011 : R2016 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
| ASTM D 2893 : 2004 | Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils |
| DEFSTAN 91-81/2(1997) : 1997 | BRAKE FLUID, AUTOMOTIVE NATO H-542 JOINT SERVICE DESIGNATION: OX-8 |
| ASTM D 187 : 2008 : R2013 | Standard Test Method for Burning Quality of Kerosine |
| MIL L 7870 : B | LUBRICATING OIL, GENERAL PURPOSE, LOW TEMPERATURE |
| MIL P 81716 : 0 | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC (MINUS 65 DEG F TO PLUS 275 DEG F) |
| MIL-DTL-81716 Revision A:2009 | PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
| MIL-DTL-46014 Revision A:2010 | LUBRICATING OIL, SPINDLE |
| ASTM D 3603 : 2015-02 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF STEAM TURBINE OIL IN THE PRESENCE OF WATER (HORIZONTAL DISK METHOD) |
| MIL-PRF-53074 Revision A:1998 | LUBRICATING OIL, STEAM-CYLINDER, MINERAL |
| MIL-PRF-6085 Revision E:2011 | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
| MIL L 6086 : D | LUBRICATING OIL, GEAR, PETROLEUM BASE |
| NFX 41 580-11 : 2014 | WOOD PRESERVATIVES - PHYSICOCHEMICAL TESTING - PART 11: LOW STABILITY TESTING |
| ASTM D 6074 : 2015 : REDLINE | Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils |
| MIL-DTL-14055 Revision G:2014 | CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER |
| ISO 4925:2005 | Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems |
| MIL-PRF-6086 Revision F:2010 | LUBRICATING OIL, GEAR, PETROLEUM BASE (NATO O-153, O-155) |
| ASTM D 3705 : 2014 : REDLINE | Standard Test Method for Misting Properties of Lubricating Fluids |
| BS ISO 4925:2005 | Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems |
| 03/106442 DC : DRAFT APR 2003 | ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS |
| SAE J 1703 : 2016 | MOTOR VEHICLE BRAKE FLUID |
| SAE AMS 3054 : 2016 | OIL, LUBRICATING, LOW TEMPERATURE FOR -55 DEGREES C (-67 DEGREES F) SERVICE |
| ASTM D 5534 : 1994 : R2005 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
| ASTM D 187 : 2008 | Standard Test Method for Burning Quality of Kerosine |
| ASTM D 1093 : 2011 : R2017 | Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues |
| ASTM D 2893 : 2004 : R2014 : EDT 1 | Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils |
| ASTM D 7665 : 2017 : REDLINE | Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids |
| ASTM D 5372 : 2017 : REDLINE | Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids |
| SAE J 1601 : 2011 | RUBBER CUPS FOR HYDRAULIC ACTUATING CYLINDERS |
| BS AU 174-2:1985 | Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles Specification for non-petroleum base brake fluid |
| SAE AMS 2518:2010(S2012) | THREAD COMPOUND, ANTI-SEIZE, GRAPHITE-PETROLATUM |
| MIL-DTL-5516 Revision D:2008 | Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C) |
| MIL-PRF-7870 Revision E:2015 | LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) |
| MIL C 8188 : C | CORROSION PREVENTIVE OIL, GAS TURBINE ENGINE, AIRCRAFT SYNTHETIC BASE |
| ASTM D 6710 : 2017 : REDLINE | Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil |
| MIL F 17111 : B | FLUID, POWER TRANSMISSION |
| ASTM D 5534 : 1994 : R2011 : EDT 1 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
| NACE TM 01 72 : 2015 | DETERMINING CORROSIVE PROPERTIES OF INSOLUBLE PETROLEUM PRODUCT PIPELINE CARGOES |
| NNN T 780 : B NOTICE 1 | TUBE CENTRIFUGE GLASS |
| DIN ISO 4925:1980-04 | ROAD VEHICLES - NON-PETROLEUM BASE BRAKE FLUID |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| ASTM D 4871 : 2011 | Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus |
| MIL-PRF-32033 Revision A:2016 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE (WATER-DISPLACING, LOW TEMPERATURE) |
| ASTM D 1093 : 2011 | Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues |
| SAE J 1704 : 2016 | MOTOR VEHICLE BRAKE FLUID BASED UPON GLYCOLS, GLYCOL ETHERS AND THE CORRESPONDING BORATES |
| SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
| SAE MS 1009 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION |
| ASTM D 2893 : 2004 : R2009 | Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils |
| SAE J 357 : 2016 | PHYSICAL AND CHEMICAL PROPERTIES OF ENGINE OILS |
| DEFSTAN 91-49/1(1980) : 1980 | LUBRICATING OIL, INSTRUMENT: SYNTHETIC NATO CODE NO. O-147 JOINT SERVICE DESIGNATION: OX-14 |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
| ASTM D 5534 : 1994 : R1999 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.