ASTM D 905 : 2008 : R2021
Current
The latest, up-to-date edition.
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
Hardcopy , PDF
English
04-16-2021
Committee |
D 14
|
DocumentType |
Test Method
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method covers the determination of the comparative shear strengths of adhesive bonds used for bonding wood and other similar materials, when tested on a standard specimen under specified conditions of preparation, conditioning, and loading in compression. This test method is intended primarily as an evaluation of adhesives for wood.
1.2The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 5266 : 2013 : R2020 | Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
ASTM C 557 : 2003 : R2017 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM D 1037 : 2012 : R2020 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
ASTM D 4690 : 2012 : R2018 | Standard Specification for Urea-Formaldehyde Resin Adhesives |
ASTM D 7966/D7966M : 2016 | Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
ASTM D 3983 : 1998 : R2019 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
ASTM D 3930 : 2008 : R2015 | Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
ASTM D 4317 : 2016 | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
ASTM D 7446 : 2009 : R2017 | Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
ASTM D 6464 : 2003 : REV A : R2017 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM D 5574 : 1994 : R2021 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
ASTM D 4027 : 1998 : R2019 | Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test |
ASTM D 3498 : 2019 : REV A | Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing |
ASTM D 3931 : 2008 : R2015 | Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading |
ASTM D 4689 : 2012 : R2018 | Standard Specification for Adhesive, Casein-Type |
ASTM D 2093 : 2003 : R2017 | Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding |
ASTM D 4680 : 1998 : R2017 | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
ASTM D 7199 : 2020 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
ASTM D 950 : 2003 : R2020 : EDT 1 | Standard Test Method for Impact Strength of Adhesive Bonds |
ASTM D 5751 : 1999 : R2019 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
ASTM D 7247 : 2017 | Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures |
ASTM D 1995 : 1992 : R2017 | Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives) |
ASTM D 2559 : 2012 : REV A : R2018 | Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions |
ASTM D 6465 : 1999 : R2016 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
ASTM D 4502 : 1992 : R2019 | Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
ASTM D 143 : 2022 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 907 : 2015 | Standard Terminology of Adhesives |
ASTM D 143 : 2023 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 907 : 2015 : R2023 | Standard Terminology of Adhesives |
ASTM D 143 : 2021 | Standard Test Methods for Small Clear Specimens of Timber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.