ASTM D 8102 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Manufacturing Quality Control of Geotextiles
Hardcopy , PDF
11-12-2024
English
02-15-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.13, 2017 Defines the manufacturing quality control of geotextiles, describing types of tests, the proper test methods, minimum testing frequencies, and best practices for sampling.
| Committee |
D 35
|
| DocumentType |
Standard Practice
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This practice covers the manufacturing quality control of geotextiles, describing types of tests, the proper test methods, minimum testing frequencies, and best practices for sampling.
1.2This practice does not address manufacturing quality assurance, product acceptance testing, or conformance testing. These are independent activities taken by organizations other than the geotextiles manufacturer.
1.3This practice is intended to aid manufacturers, suppliers, purchasers, installers, and end users of geotextiles in establishing a minimum level of effort for maintaining quality control.
1.4This practice covers procedures for sampling geotextiles for the purpose of manufacturing quality control (MQC). These procedures are designed to ensure that the correct number of representative samples are obtained and properly reported by the manufacturer.
1.5The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4595/D4595M : 2024 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Method |
| ASTM D 4354 : 2012 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
| ASTM D 4751 : 2016 : REDLINE | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 5261 : 2010 : R2018 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 4355 : 2007 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus |
| ASTM D 4533 : 2004 : R2009 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
| ASTM D 4491 : 1999 : REV A : R2009 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 4533 : 2011 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
| ASTM D 4533 : 2004 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
| ASTM D 5261 : 2010 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 4355 : 1999 | Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus) |
| ASTM D 4354 : 2012 : R2020 | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing |
| ASTM D 4595 : 1986 : R2001 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 4533 : 1991 : R1996 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
| ASTM D 4751 : 2021 | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 6241 : 2014 : REDLINE | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
| ASTM D 4751 : 1999 : REV A | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 4751 : 2004 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 4491 : 1999 : REV A : R2004 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 5261 : 1992 : R2003 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 4632 : 1991 : R1996 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
| ASTM D 4595 : 2011 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 4751 : 1999 : REV A : R2004 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 4751 : 2021 : REV A | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 5261 : 1992 : R1996 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 4595 : 1986 : R1994 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 4491 : 1999 : REV A : R2014 : EDT 1 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 5261 : 1992 : R2009 | Standard Test Method for Measuring Mass per Unit Area of Geotextiles |
| ASTM D 6241 : 2014 | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 4751 : 2012 | Standard Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 6241 : 2004 : R2009 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 4354 : 1999 : R2009 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 4595 : 2017 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 6241 : 1999 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 4354 : 2012 : REDLINE | Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing |
| ASTM D 4354 : 1999 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 4595 : 2009 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 6241 : 2022 | Standard Test Method for Static Puncture Index Strength of Geotextiles and Geotextile-Related Products Using a 50 mm Probe |
| ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
| ASTM D 6241 : 2004 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 4632 : 2008 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
| ASTM D 4751 : 2020 : REV B | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 6241 : 2004 : R2009 : EDT 1 | Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 4751 : 2016 | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
| ASTM D 4355 : 2002 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus |
| ASTM D 4491 : 1999 : REV A | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 4355 : 2005 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus |
| ASTM D 4491 : 1999 : REV A : R2004 | Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 4354 : 1999 : R2004 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 6241 : 2022 : REV A | Standard Test Method for Measuring Static Puncture Strength of Geotextiles and Geosynthetic-Related Products Using a 50 mm Probe |
| ASTM D 4632 : 1991 : R2003 | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
| ASTM D 4595 : 2005 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASTM D 4595 : 2017 : REDLINE | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method |
| ASQ Z1.9:2003 (R2013) | Sampling Procedures And Tables For Inspection By Variables For Percent Nonconforming |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.