ASTM D 7669 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Practical Lubricant Condition Data Trend Analysis
Hardcopy , PDF
10-14-2020
English
04-01-2015
Committee |
D 02
|
DocumentType |
Guide
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide covers practical techniques for condition data trend analysis.
1.2The techniques may be utilized for all instrumentation that provides numerical test results. This guide is written specifically for data obtained from lubricant samples. Other data obtained and associated with the machine may also be used in determining the machine condition.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 8127 : 2017 : EDT 1 | Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants |
ASTM D 8182 : 2018 | Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS) |
ASTM D 7919 : 2014 : R2017 | Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes |
ASTM D 6224 : 2016 | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
ASTM D 8120 : 2017 | Standard Test Method for Ferrous Debris Quantification |
ASTM D 7889 : 2013 | Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy |
ASTM D 8004 : 2015 | Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing |
ASTM D 4378 : 2013 | Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines |
ASTM D 4057 : 2019 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4057 : 1995 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 7720:2011 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
ASTM D 4177 : 2016 : EDT 1 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM E 2587 : 2016 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM D 7874 : 2013 : R2018 | Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing |
ASTM E 2587 : 2014 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM D 4177 : 1995 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4057 : 1981 : EDT 2 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 7874 : 2013 | Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing |
ASTM E 2587 : 2007 : EDT 1 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM E 2587 : 2015 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM D 4057 : 2006 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4177 : 2015 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM E 2587 : 2010 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM D 4057 : 2012 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4177 : 1995 : R2010 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 4177 : 1995 : R2000 | Standard Practice for Automatic Sampling of Peroleum and Petroleum Products |
ASTM E 2587 : 2012 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM D 4177 : 2016 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 4177 : 1995 : R2005 | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 7720 : 2011 : R2017 | Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination |
ASTM E 2587 : 2014 : EDT 1 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM D 4057 : 1995 : R2000 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
ASTM D 4177 : 2015 : REV A | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products |
ASTM D 4057 : 2006 : R2011 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.