ASTM D 7619 : 2017 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
06-18-2022
English
07-20-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 05.04, 2018 Defines a specific automatic particle counter2 (APC) to count and measure the size of dispersed dirt particles, water droplets and other particles, in light and middle distillate fuel, and bio fuels such as biodiesel and biodiesel blends, in the overall range from 4 [mu]m(c) to 100 [mu]m(c) and in the size bands >=4 [mu]m(c), >=6 [mu]m(c), and >=14 [mu]m(c).
| Committee |
D 02
|
| DocumentType |
Redline
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method uses a specific automatic particle counter2 (APC) to count and measure the size of dispersed dirt particles, water droplets and other particles, in light and middle distillate fuel, and bio fuels such as biodiesel and biodiesel blends, in the overall range from 4 µm(c) to 100 µm(c) and in the size bands ≥4 µm(c), ≥6 µm(c), and ≥14 µm(c).
Note 1:ASTM and military specification fuels falling within the scope of this test method include Specifications: D975 grades 1D and 2D, D1655, D3699, D4814 (see 14.1.1.1), D6751, D7467, distillate grades of D396 and D2880, MIL-DTL-83133, and MIL-DTL-16884.
Note 2:For the purposes of this test method, water droplets are counted as particles, and agglomerated particles are detected and counted as a single larger particle. Dirt includes biological particles. Although the projected area of a particle is measured, this is expressed as the diameter of a sphere for the purposes of this test method.
Note 3:The notation (c), used with particle sizes, is used to denote that the apparatus has been calibrated in accordance with ISO 11171. Strictly this only applies to particles up to 50 µm.
Note 4:This test method may be used for particle sizes bands up to 100 µm(c), however the precision has only been determined for the size bands ≥4 µm(c), ≥6 µm(c), and ≥14 µm(c). All measurements are per millilitre.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| MIL-DTL-83133 Revision K:2018 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| MIL-DTL-25524 Revision F:2015 | TURBINE FUEL, AVIATION, THERMALLY STABLE (JPTS) |
| ASTM D 8166 : 2017 | Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters |
| SAE J313_201706 | Diesel Fuels |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| ASTM D 1655 : 2018-01 | SPECIFICATION FOR AVIATION TURBINE FUELS |
| EI 1535 : 2016 | MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL |
| ASTM D 7467 : 2017-03 | SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
| ASTM D 7467 : 2017-03 | SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
| ASTM D 3699 : 2013-05 | SPECIFICATION FOR KEROSINE |
| MIL-DTL-16884 Revision P:2017 | FUEL, NAVAL DISTILLATE |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.