ASTM D 7538 : 2009 : R2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
Hardcopy , PDF
01-17-2024
English
09-12-2018
Committee |
D 01
|
DocumentType |
Standard Practice
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1A newly applied traffic paint film may be exposed to rain of varying intensities shortly after application. Practice D7377 describes a practice for evaluating the water wash-off resistance of traffic paints to a hard rain using a steady stream of water from a faucet at a rate of approximately 5.7 L per min. Practice D7538 is a similar practice that describes the use of an adjustable nozzle atomizing spray device to deliver a spray of water that simulates rain rates from approximately 0.05 to 0.5 L per min. This test can be used to compare conventional and fast-dry traffic paints for their relative ability to withstand rain soon after application on roadway surfaces.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 7539 : 2010 : R2015 | Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints |
ASTM D 2205 : 2015 | Standard Guide for Selection of Tests for Traffic Paints |
ASTM D 2205 : 2020 | Standard Guide for Selection of Tests for Traffic Paints |
ASTM D 7539 : 2010 : R2020 | Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints |
ASTM D 3924 : 2016 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
ASTM D 711 : 2020 | Standard Test Method for No-Pick-Up Time of Traffic Paint |
ASTM D 711 : 2023 | Standard Test Method for No-Pick-Up Time of Pavement Markings |
ASTM D 7377 : 2007 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints |
ASTM D 4414 : 1995 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
ASTM D 562 : 2010 : R2018 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
ASTM D 1212 : 1991 : R2001 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
ASTM D 1212 : 1991 : R1996 : EDT 1 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
ASTM D 823 : 2018 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
ASTM D 3924 : 1980 : R1996 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
ASTM D 1212 : 1991 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
ASTM D 562 : 2010 : R2023 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
ASTM D 4414 : 1995 : R2001 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
ASTM D 7377 : 2009 : R2018 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet |
ASTM D 823 : 2018 : R2022 | Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels |
ASTM D 1005 : 1995 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.