ASTM D 7504 : 2023
Current
The latest, up-to-date edition.
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
Hardcopy , PDF
English
05-15-2023
Committee |
D 16
|
DocumentType |
Test Method
|
Pages |
14
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method covers the determination of total nonaromatic hydrocarbons and monocyclic aromatic hydrocarbons in benzene, toluene, ethylbenzene, p-xylene, o-xylene, styrene and mixed xylenes by gas chromatography. The purity of benzene, toluene, ethylbenzene, p-xylene, o-xylene, styrene and mixed xylenes is also calculated. Similar test methods, using the internal standard calibration technique and the external standard calibration technique, are Test Methods D2360, D5060, D5135, and D5917 respectively.
1.2The limit of detection (LOD) is 0.0002 mass % and limit of quantitation (LOQ) is 0.0006 mass % for impurities in toluene, mixed xylenes, p-xylene, o-xylene, ethylbenzene, benzene, and styrene.
1.3In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 2359 : 2019 | Standard Specification for Refined Benzene-535 |
ASTM D 4734 : 2020 | Standard Specification for Refined Benzene-545 |
ASTM D 6367 : 2021 | Standard Specification for AMS (α-Methylstyrene) |
ASTM D 5471 : 2018 : R2022 | Standard Specification for O-Xylene 980 |
ASTM D 843 : 2019 | Standard Specification for Nitration Grade Xylene |
ASTM D 841 : 2019 | Standard Specification for Nitration Grade Toluene |
ASTM D 7185 : 2019 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
ASTM D 2700 : 2023 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 5871 : 2019 | Standard Specification for Benzene for Cyclohexane Feedstock |
ASTM D 2827 : 2019 | Standard Specification for Styrene Monomer |
ASTM D 7124 : 2019 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
ASTM D 2699 : 2023 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
ASTM D 7951 : 2020 | Standard Specification for Disproportionation (TDP) Toluene |
ASTM D 5211 : 2019 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
ASTM D 5606 : 2019 | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
ASTM D 5136 : 2019 | Standard Specification for High Purity <emph type="ital">p</emph>-Xylene |
ASTM D 3193 : 2019 | Standard Specification for Ethylbenzene |
ASTM D 6809 : 2020 : REV A | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 6809 : 2024 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.