ASTM D 737 : 2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Test Method for Air Permeability of Textile Fabrics
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
12-01-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 13
|
| DocumentType |
Test Method
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This test method covers the measurement of the air permeability of textile fabrics.
1.2 This test method applies to most fabrics including woven fabrics, nonwoven fabrics, air bag fabrics, blankets, napped fabrics, knitted fabrics, layered fabrics, and pile fabrics. The fabrics may be untreated, heavily sized, coated, resin-treated, or otherwise treated.
1.3 The values stated in SI units are to be regarded as the standard. The values stated in inch-pound units may be approximate.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| SAE AMS 3792 : 2015 | TAPE, LOW MODULUS ARAMID 300 (1334), 1000 (4448) AND 8000 (13,345) BREAKING STRENGTH |
| A-A-59369 Base Document:2003 | UNDERSHIRT, SILK WEIGHT SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-1 |
| A-A-50194 Revision B:2003 | HOOD, BALACLAVA, EXTENDED COLD WEATHER |
| ASTM D 6830 : 2002 : R2008 | Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media |
| ASTM F 2298 : 2003 | Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell |
| MIL-DTL-32439 Revision A:2017 | CLOTH, DUCK, TEXTURED NYLON |
| ASTM D 6674 : 2001 : R2009 | Standard Guide for Proficiency Test Program for Fabrics |
| 02/703683 DC : DRAFT FEB 2002 | |
| MIL DTL 43734 : E | CLOTH, DUCK, TEXTURED NYLON |
| ASTM D 6476 : 2012 : R2017 | Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics |
| MIL-DTL-14610 Revision H:2000 | COVERALLS, EXPLOSIVE HANDLERS |
| ASTM E 1549/E1549M : 2013 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM D 4850 : 2013 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 4850 : 2013 : EDT 1 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 4969 : 2017 : REDLINE | Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
| ASTM F 778 : 1988 : R2007 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM D 6830 : 2002 | Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media |
| ASTM D 6674 : 2001 : R2017 | Standard Guide for Proficiency Test Program for Fabrics |
| BS EN ISO 9920:2009 | Ergonomics of the thermal environment. Estimation of thermal insulation and water vapour resistance of a clothing ensemble |
| EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| MIL-DTL-32102 Base Document:2002 | JOINT SERVICE LIGHTWEIGHT INTEGRATED SUIT TECHNOLOGY (JSLIST) COAT AND TROUSER, CHEMICAL PROTECTIVE |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| MIL-PRF-32107 Base Document:2002 | Hose, Air Duct, General Specification for |
| I.S. EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines -Bituminous hot applied materials for external coating |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| A-A-59549 Base Document:2000 | OVERALLS, COLD WEATHER, SYNTHETIC FLEECE |
| ASTM D 461 : 1993 | Standard Test Methods for Felt (Withdrawn 2004) |
| ASTM D 4850 : 2013 : R2017 | Standard Terminology Relating to Fabrics and Fabric Test Methods |
| ASTM D 6674 : 2001 : R2013 | Standard Guide for Proficiency Test Program for Fabrics |
| ASTM D 5101 : 2012 | TEST METHOD FOR MEASURING THE FILTRATION COMPATIBILITY OF SOIL-GEOTEXTILE SYSTEMS |
| MIL-DTL-43128 Revision D:2018 | Cloth, Plain Weave, Nylon: Water Repellent Treated and Untreated |
| ASTM D 6674 : 2001 | Standard Guide for Proficiency Test Program for Fabrics |
| ASTM F 778 : 1988 : R2014 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM E 2352 : 2019 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations |
| ASTM D 5446 : 2008 : R2019 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
| ASTM E 2352 : 2004 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
| ASTM F 2298 : 2003 : R2009 : EDT 1 | Standard Test Methods for Water Vapor Diffusion Resistance and Air Flow Resistance of Clothing Materials Using the Dynamic Moisture Permeation Cell (Withdrawn 2015) |
| I.S. EN ISO 9920:2009 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THERMAL INSULATION AND WATER VAPOUR RESISTANCE OF A CLOTHING ENSEMBLE |
| PIA C 43375 : C | CLOTH, DUCK, NYLON, 12.5 OUNCE |
| MIL-DTL-32240 Base Document:2007 | Submarine Wetbag |
| A-A-59403 Revision A:2008 | |
| A-A-55271 Base Document:1995 | CLOTH, WIND RESISTANT, POPLIN, COTTON |
| A-A-59329 Base Document:2003 | DRAWERS, SILK WEIGHT SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-1 |
| ASTM D 3941 : 2014 : REDLINE | Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus |
| MIL-DTL-484 Revision J:2006 | CLOTH, WIND RESISTANT OXFORD, COTTON, WATER REPELLENT TREATED |
| AAMI TIR 11 : 2005 | SELECTION AND USE OF PROTECTIVE APPAREL AND SURGICAL DRAPES IN HEALTH CARE FACILITIES |
| BS 3424-16:1995 | Testing coated fabrics Method 18. Determination of air permeability |
| A-A-55104 Base Document:1992 | COVERALLS, SAFETY, INDUSTRIAL |
| AWWA C203 : 2015 | COAL-TAR PROTECTIVE COATINGS AND LININGS FOR STEEL WATER PIPE |
| ASTM D 5101 : 2012 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM F 778 : 1988 : R1993 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM D 6830 : 2002 : R2016 | Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media |
| ASTM E 1549/E1549M : 2013 : R2016 | Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations |
| ASTM E 2352 : 2004 : R2010 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
| DIN EN ISO 14644-5:2005-03 | Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004) |
| ISO 14644-5:2004 | Cleanrooms and associated controlled environments — Part 5: Operations |
| UNI EN ISO 9920 : 2009 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THERMAL INSULATION AND WATER VAPOUR RESISTANCE OF A CLOTHING ENSEMBLE |
| MIL-DTL-44436 Revision B:2012 | CLOTH, WIND RESISTANT POPLIN, NYLON/COTTON BLEND |
| NACE RP 06 02 : 2002 | FIELD-APPLIED COAL TAR ENAMEL PIPE COATING SYSTEMS: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
| MIL-DTL-6645 Revision J:2001 | Parachutes, Personnel, General Specification for |
| PIA C 8021 : C | CLOTH, PARACHUTE, NYLON, CARGO AND DECELERATION |
| MIL-DTL-7620 Revision D:2002 | PARACHUTES AND COMPONENTS, CARGO, EXTRACTION AND DECELERATION, GENERAL SPECIFICATION FOR |
| A-A-59358 Base Document:2003 | UNDERSHIRT, MID WEIGHT, SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-2 |
| TAPPI T 251 : CM 85 | AIR PERMEABILITY OF POROUS PAPER, FABRICS, AND PULP HANDSHEETS |
| A-A-59327 Base Document:2003 | DRAWERS, MID WEIGHT, SPEAR SYSTEM, LIGHTWEIGHT ENVIRONMENTAL PROTECTION (LEP), LAYER-2 |
| MIL-DTL-43649 Revision D:2005 | PARACHUTES, CARGO, 12,26, AND 34 FOOT DIAMETER |
| A-A-55270 Base Document:1995 | UNDERWEAR SET, LIGHTWEIGHT, COLD WEATHER |
| 01/122934 DC : DRAFT AUG 2001 | BS EN ISO 14644-5 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 5: OPERATIONS |
| MIL-DTL-44031 Revision F:2017 | CLOTH, CAMOUFLAGE PATTERN: COTTON AND NYLON |
| PPP B 1714 : NOTICE 1 | BAGS, SHIPPING, WOVEN POLYPROPYLENE |
| ASTM D 5446 : 2008 : R2013 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
| ASTM F 778 : 1988 : R2001 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
| ASTM D 1117 : 2001 | Standard Guide for Evaluating Nonwoven Fabrics (Withdrawn 2009) |
| ASTM F 2970 : 2017 : REDLINE | Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts |
| ASTM D 6674 : 2001 : R2009 : EDT 1 | Standard Guide for Proficiency Test Program for Fabrics |
| ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| BS EN ISO 14644-5:2004 | Cleanrooms and associated controlled environments Operations |
| AAMI TIR11:2005(R2015) | SELECTION AND USE OF PROTECTIVE APPAREL AND SURGICAL DRAPES IN HEALTH CARE FACILITIES |
| ISO 9920:2007 | Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble |
| BS EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating |
| EN ISO 14644-5:2004 | Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004) |
| EN ISO 9920:2009 | Ergonomics of the thermal environment - Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007, Corrected version 2008-11-01) |
| MIL-DTL-32117 Revision A:2004 | HELMET COVER, REVERSIBLE, MARPAT[TM] WOODLAND AND DESERT PATTERN CAMOUFLAGE, MARINE CORPS |
| MIL-DTL-43191 Revision J:2005 | Cloth, Wind Resistant Sateen, Cotton and Nylon |
| MIL-DTL-44431 Revision B:2003 | CLOTH, PLAIN WEAVE, NYLON FILAMENT, LIGHTWEIGHT |
| ASTM D 5446 : 2008 | Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
| PIA C 498 : C | CLOTH, PARACHUTE, SYNTHETIC FIBER (FOR AMMUNITION PARACHUTES) |
| MIL-DTL-9401 Revision C:2003 | CANOPY, PARACHUTE, RING SLOT, GENERAL SPECIFICATION FOR |
| ACCP-1 : 1992 | HEAT TRANSFER AND PHYSIOLOGICAL EVALUATION OF CLOTHING |
| PIA C 17208 : B | CLOTH, PARACHUTE, 240-PERMEABILITY; FOR USE WITH UNDERWATER ORDNANCE |
| SAE AMS 3801 : 2016 | CLOTH, PARACHUTE - META-ARAMID, LOW MODULUS |
| ASTM D 6476 :2012 | Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics |
| DIN EN ISO 9920:2009-10 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THERMAL INSULATION AND WATER VAPOUR RESISTANCE OF A CLOTHING ENSEMBLE |
| DIN EN 10300:2006-02 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.