• There are no items in your cart

ASTM D 7165 : 2022

Current

Current

The latest, up-to-date edition.

Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

11-10-2022

US$63.00
Excluding Tax where applicable

Committee
D 03
DocumentType
Standard Practice
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1 This practice is for the determination of gas phase sulfur-containing compounds in high methane content gaseous fuels such as natural gas using on-line/at-line instrumentation, and continuous fuel monitors (CFMS). It has been successfully applied to other types of gaseous samples including air, digester, landfill, and refinery fuel gas. The detection range for sulfur compounds, reported as picograms sulfur, based upon the analysis of a 1 mL sample, is one hundred (100) to one million (1 000 000). This is equivalent to 0.1 to 1000 mg/m3.

1.2This practice does not purport to measure all sulfur species in a sample. Only gas phase compounds that are transported to an instrument under the measurement conditions selected are measured.

1.3Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 7493 : 2014 : R2018 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D 8080 : 2021 Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel
ASTM D 7800/D7800M : 2014 Standard Test Method for Determination of Elemental Sulfur in Natural Gas (Withdrawn 2023)

ASTM D 7493 : 2022 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D 3609 : 2000 : R2014 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 4468 : 1985 : R2015 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry
ASTM D 1072 : 2023 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM D 6228 : 2019 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
ASTM D 7551 : 2010 : R2015 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence (Withdrawn 2024)
ASTM D 3764 : 2022 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 4084 : 2007 : R2017 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
ASTM D 4084 : 2023 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
ASTM D 1072 : 2006 : R2017 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
ASTM D 6122 : 2023 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D 3609 : 2022 Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 4150 : 2023 : REV A Standard Terminology Relating to Gaseous Fuels
ASTM D 4626 : 1995 : R2019 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 1945 : 2014 : R2019 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
ASTM D 3764 : 2023 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D 4626 : 2023 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 5504 : 2020 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 4468 : 2023 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry
ASTM D 4150 : 2021 : REV B Standard Terminology Relating to Gaseous Fuels
ASTM D 7833 : 2020 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
ASTM D 4150 : 2023 Standard Terminology Relating to Gaseous Fuels
ASTM D 4810 : 2020 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
ASTM D 6122 : 2022 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.