ASTM D 6809 : 2024
Current
Current
The latest, up-to-date edition.
Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
07-01-2024
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 16
|
| DocumentType |
Guide
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide contains non-mandatory Quality Assurance/Quality Control (QA/QC) activities that may be referenced in standards maintained by ASTM Committee D16 on Aromatic Hydrocarbons and Related Materials.
1.2This guide does not purport to address all of the issues that may be pertinent to an active QA/QC process.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2340 : 2023 | Standard Test Method for Peroxides in Styrene Monomer |
| ASTM E 410 : 2017 : REV A | Standard Test Method for Moisture and Residue in Liquid Chlorine |
| ASTM E 359 : 2017 | Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) |
| ASTM D 7184 : 2020 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM E 2313 : 2022 | Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry) |
| ASTM E 2037 : 2024 | Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC) |
| ASTM E 224 : 2023 | Standard Test Methods for Analysis of Hydrochloric Acid |
| ASTM D 1492 : 2021 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration |
| ASTM D 7536 : 2020 | Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 7884 : 2024 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography |
| ASTM D 8032 : 2020 | Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration |
| ASTM D 5713 : 2023 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography |
| ASTM E 2679 : 2022 | Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by <brk />Non-Aqueous Potentiometric Titration |
| ASTM D 6142 : 2021 | Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography |
| ASTM D 3160 : 2020 : REV A | Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene) |
| ASTM D 7882 : 2020 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode |
| ASTM D 4493 : 2020 | Standard Test Method for Solidification Point of Bisphenol A<brk/>(4,4<emph type="ital" >′</emph>-Isopropylidenediphenol) |
| ASTM D 8087 : 2018 | Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry |
| ASTM D 6143 : 2023 | Standard Test Method for Iron Content of Bisphenol A (4,4<emph type="bdit">′</emph > - Isopropylidenediphenol) |
| ASTM D 7504 : 2023 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 7183 : 2023 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 2232 : 2023 | Standard Test Method for Evaporating Residue of Naphthalene |
| ASTM E 1064 : 2024 | Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration |
| ASTM D 6875 : 2023 | Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor |
| ASTM E 1754 : 2017 : REV A | Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry |
| ASTM D 4735 : 2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography |
| ASTM D 8005 : 2023 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 850 : 2021 | Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials |
| ASTM E 223 : 2023 : EDT 1 | Standard Test Methods for Analysis of Sulfuric Acid |
| ASTM D 6144 : 2022 | Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography |
| ASTM E 346 : 2024 | Standard Test Method for Analysis of Carbonizables in Methanol |
| ASTM E 1584 : 2023 | Standard Test Method for Assay of Nitric Acid |
| ASTM D 7011 : 2015 : R2019 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
| ASTM D 5135 : 2021 | Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
| ASTM D 5310 : 2023 | Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography |
| ASTM D 4789 : 2020 : EDT 1 | Standard Test Method for Solution Color of Bisphenol A (4,4<emph type="ital">′</emph >-Isopropylidenediphenol) |
| ASTM D 2119 : 2024 | Standard Test Method for Aldehydes in Styrene Monomer |
| ASTM D 4471 : 2022 | Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration |
| ASTM D 4590 : 2022 | Standard Test Method for Colorimetric Determination of <emph type="ital">p-tert</emph >-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry |
| ASTM D 7359 : 2023 | Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
| ASTM E 2409 : 2020 : REV A | Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol<brk/>(Gas Chromatographic Method) |
| ASTM E 649 : 2017 : REV A | Standard Test Method for Bromine in Chlorine |
| ASTM E 70 : 2024 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
| ASTM E 222 : 2023 | Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation |
| ASTM D 8266 : 2019 | Standard Test Method for Analysis of Bisphenol A (4,4`-Isopropylidenediphenol) by High Performance Liquid Chromatography |
| ASTM D 5194 : 2024 : REV A | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM E 291 : 2018 | Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) |
| ASTM E 2036 : 2024 | Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC) |
| ASTM E 203 : 2024 | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM E 449 : 2018 | Standard Test Methods for Analysis of Calcium Chloride |
| ASTM D 848 : 2023 | Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons |
| ASTM D 849 : 2015 : R2024 | Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons |
| ASTM D 5060 : 2012 : R2021 : EDT 1 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
| ASTM D 7704 : 2024 | Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration |
| ASTM D 7883 : 2020 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography |
| ASTM D 891 : 2018 | Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals |
| ASTM D 5386 : 2024 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 7881 : 2020 : EDT 1 | Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode |
| ASTM E 1899 : 2023 | Standard Test Method for Hydroxyl Groups Using Reaction with <emph type="ital">p</emph >-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide |
| ASTM D 7266 : 2023 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) |
| ASTM D 8311 : 2020 | Standard Test Method for Impurities in Monoethylene Glycol by Gas Chromatography with Normalization |
| ASTM E 534 : 2018 | Standard Test Methods for Chemical Analysis of Sodium Chloride |
| ASTM D 5917 : 2015 : R2019 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 7057 : 2023 | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard) |
| ASTM E 324 : 2023 | Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals |
| ASTM D 852 : 2024 | Standard Test Method for Solidification Point of Benzene |
| ASTM E 299 : 2017 : REV A | Standard Test Method for Trace Amounts of Peroxides In Organic Solvents |
| ASTM D 3366 : 2018 | Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) |
| ASTM E 1746 : 2017 : REV A | Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities |
| ASTM E 2193 : 2023 | Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry) |
| ASTM D 1631 : 2024 | Standard Test Method for Water in Phenol and Related Materials by the Karl Fischer Reagent Method |
| ASTM E 1228 : 2023 | Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure |
| ASTM E 411 : 2024 | Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine |
| ASTM D 8063 : 2018 | Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration |
| ASTM D 7871 : 2023 | Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number) |
| ASTM D 5808 : 2023 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
| ASTM D 7977 : 2023 | Standard Test Methods for Polymer Content of AMS (α-Methylstyrene) |
| ASTM E 806 : 2021 | Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure) |
| ASTM D 2121 : 2023 | Standard Test Methods for Polymer Content of Styrene Monomer |
| ASTM E 1615 : 2022 | Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry |
| ASTM D 1686 : 2019 | Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
| ASTM E 506 : 2017 : REV A | Standard Test Method for Mercury in Liquid Chlorine |
| ASTM E 298 : 2017 : REV A | Standard Test Methods for Assay of Organic Peroxides |
| ASTM E 1786 : 2017 : REV A | Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry |
| ASTM D 5776 : 2021 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM E 394 : 2022 | Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
| ASTM D 8534 : 2023 | Standard Test Method for Determination of Trace Peroxides in Liquid, Liquefied, and Reagents Soluble Hydrocarbon Streams using Flow Injection System with Ultraviolet/Visible Detector |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.