ASTM D 6360 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
Hardcopy , PDF
08-13-2021
English
10-02-2015
Committee |
D 20
|
DocumentType |
Standard Practice
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers specific procedures and test conditions that are applicable for exposure of plastics in enclosed carbon-arc devices conducted in accordance with Practices G151 and G153. This practice also covers the preparation of test specimens, the test conditions suited for plastics, and the evaluation of test results.
1.2This practice does not cover filtered open-flame carbon-arc exposures of plastics, which are covered in Practice D1499. Practice D5031 describes enclosed carbon-arc exposures of paints and related coatings.
1.3The values stated in SI units are to be regarded as standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 1:There is no known ISO equivalent to this practice.
ASTM D 4976 : 2012 : REV A : R2020 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
ASTM D 1499 : 2013 : R2021 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM D 4000 : 2020 | Standard Classification System for Specifying Plastic Materials |
ASTM D 1047 : 2021 | Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable |
ASTM D 1499 : 2013 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM D 4000 : 2016 | Standard Classification System for Specifying Plastic Materials |
ASTM G 178 : 2016 | Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
ASTM D 1248 : 2016 | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM D 1047 : 2016 | Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable |
ASTM D 5870 : 2016 | Standard Practice for Calculating Property Retention Index of Plastics |
ASTM D 4976 : 2012 : REV A | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
ASTM D 1499 : 2013 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM D 5031 : 2001 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
ASTM D 1499 : 2013 : R2021 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 5031 : 1996 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
ASTM D 5031 : 2001 : R2006 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
ASTM D 5870 : 1995 | Standard Practice for Calculating Property Retention Index of Plastics |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 3980 : 1987 | Standard Practice for Interlaboratory Testing of Paint and Related Materials |
ASTM D 5870 : 2011 | Standard Practice for Calculating Property Retention Index of Plastics |
ASTM D 1499 : 2005 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 3980 : 1988 | Practice for Interlaboratoy Testing of Paint and Related Materials (Withdrawn 1998) |
ASTM D 1499 : 1999 | Standard Practice Filtered Open-Flame Carbon-Arc Type Exposures of Plastics |
ASTM D 5870 : 2016 | Standard Practice for Calculating Property Retention Index of Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.