ASTM D 5948 : 2005 : R2020
Current
The latest, up-to-date edition.
Standard Specification for Molding Compounds, Thermosetting
Hardcopy , PDF
English
12-04-2020
Committee |
D 20
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers the basic properties of thermoset molding compounds and the test methods used to establish the properties.
1.2Classification—Molding thermosetting plastic compounds shall be of the following resins and are covered by the individual specification sheets (see 5.1 and Annex A1 – Annex A8).
Resin |
Phenolic, cellulose filled |
Phenolic, mineral/glass filled |
Melamine |
Polyester |
Diallyl iso-phthalate |
Diallyl ortho-phthalate |
Silicone |
Epoxy |
Note 1:There is no known ISO equivalent to this standard.
1.3Order of Precedence—In the event of a conflict between the text of this specification and the references cited in Section 2 (except for related specification sheets), the text of this specification takes precedence. Nothing in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
1.4The values stated in SI units are to be considered standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 256 : 2010 : R2018 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
ASTM D 3636 : 2024 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
ASTM D 150 : 2022 | Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
ASTM D 256 : 2023 : EDT 1 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
ASTM E 1224 : 1994 | Standard Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes (Withdrawn 2002) |
ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
ASTM D 256 : 2023 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
ASTM D 495 : 1999 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
ASTM D 3638 : 2012 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
ASTM D 3638 : 2021 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
ASTM D 4350 : 2016 : R2022 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
ASTM D 3636 : 2019 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
ASTM D 638 : 2014 | Standard Test Method for Tensile Properties of Plastics |
ASTM D 229 : 2019 : EDT 1 | Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
ASTM D 4350 : 2016 | Standard Test Method for Corrosivity Index of Plastics and Fillers |
ASTM D 618 : 2013 | Standard Practice for Conditioning Plastics for Testing |
ASTM D 3638 : 2021 : EDT 1 | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
ASTM D 695 : 2015 | Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM D 570 : 2022 | Standard Test Method for Water Absorption of Plastics |
ASTM D 150 : 2018 | Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
ASTM D 695 : 2023 | Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
ASTM D 495 : 2022 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
ASTM D 618 : 2021 | Standard Practice for Conditioning Plastics for Testing |
ASTM D 638 : 2022 | Standard Test Method for Tensile Properties of Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.