ASTM D 5894 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
07-20-2021
English
04-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 06.01, 2017 Defines basic principles and operating practice for cyclic corrosion/UV exposure of paints on metal, using alternating periods of exposure in two different cabinets: a cycling salt fog/dry cabinet and a fluorescent UV/condensation cabinet.
| Committee |
D 01
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This practice covers basic principles and operating practice for cyclic corrosion/UV exposure of paints on metal, using alternating periods of exposure in two different cabinets: a cycling salt fog/dry cabinet, and a fluorescent UV/condensation cabinet.
1.2This practice is limited to the methods of obtaining, measuring, and controlling exposure conditions, and procedures. It does not specify specimen preparation nor evaluation of results.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| A-A-3127 Base Document:1998 | COATING SYSTEM: ALUMINUM EPOXY MASTIC FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| A-A-3132 Revision A:2003 | COATING SYSTEM: EPOXY PRIMER/URETHANE TOPCOAT FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
| MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| ASTM D 7087 : 2005 : REV A : R2010 | Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments (Withdrawn 2019) |
| 16/30340711 DC : 0 | BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 7893 : 2013 | Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products |
| ASTM D 1654 : 2008 : R2016 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
| NACE 02107 : 0 | COATINGS FOR PROTECTION OF THREADED FASTENERS USED WITH STRUCTURAL STEEL, PIPING, AND EQUIPMENT |
| SSPC-PAINT 29 : 2014 | ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED |
| CGSB 1.184 : 1998 | COAL TAR-EPOXY COATING |
| SSPC-PAINT 24 : 2016 | LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED |
| AASHTO M 300 : 2003 | SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
| PREN 16602-70-14 : DRAFT 2016 | SPACE PRODUCT ASSURANCE - CORROSION |
| ASTM D 1654 : 2008 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
| NACE TM 04 04 : 2004 | Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation<br> |
| SSPC-PAINT 23 : 2013 | LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| NASA STD 6012 : 2012 | CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE |
| CGSB-1.40 : 1997 | ANTICORROSIVE STRUCTURAL STEEL ALKYD PRIMER |
| ASTM D 7087 : 2005 | Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments |
| NACE TM 03 04 : 2004 | OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION |
| ASTM D 7087 : 2005 : REV A | Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| ASTM D 1654 : 2008 : R2016 : EDT 1 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
| SSPC-PAINT 43 : 2012 | DIRECT-TO-METAL ALIPHATIC POLYUREA COATING, PERFORMANCE-BASED |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ASTM D 4587 : 2011 : REDLINE | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.