ASTM D 579/D579M : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Greige Woven Glass Fabrics
Hardcopy , PDF
02-15-2024
English
03-23-2015
Committee |
D 13
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers greige fabrics woven from “E” electrical glass fiber yarns. This specification can also be applied to fabrics made of other glass fiber types as agreed upon between the purchaser and the supplier.
1.2This specification specifies the terminology, definitions, general requirements and physical requirements for greige glass fiber fabrics. This specification permits the application of organic materials to the glass fiber yarn during manufacture that helps facilitate weaving.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth, and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates.
1.5Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include finished glass fabrics, unfinished glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 4595/D4595M : 2023 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Method |
ASTM E 2098/E2098M : 2013 : R2023 | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
ASTM D 1668/D1668M : 1997 : REV A : R2021 | Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
ASTM D 7556 : 2010 : R2019 | Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests |
ASTM D 5035 : 1995 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 1423 : 2002 | Standard Test Method for Twist in Yarns by Direct-Counting |
ASTM D 3774 : 1996 : R2012 | Standard Test Method for Width of Textile Fabric |
ASTM D 3774 : 1996 : R2004 | Standard Test Methods for Width of Textile Fabric |
ASTM D 1059 : 1997 | Standard Test Method for Yarn Number Based on Short-Length Specimens |
ASTM D 1776 : 1998 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 3776 : 2007 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
ASTM D 1059 : 2017 : R2022 | Standard Test Method for Yarn Number Based on Short-Length Specimens |
ASTM D 1776 : 1967 : EDT 1 | Standard Method Of Conditioning Textiles And Textile Products For Testing |
ASTM D 3776 : 1996 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
ASTM D 1777 : 1996 : R2011 : EDT 1 | Standard Test Method for Thickness of Textile Materials |
ASTM D 3774 : 1996 : R2008 : EDT 2 | Standard Test Method for Width of Textile Fabric |
ASTM D 3773 : 2007 | Standard Test Methods for Length of Woven Fabric |
ASTM D 3775 : 2017 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
ASTM D 5035 : 2011 : R2015 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 1777 : 1996 : R2002 | Standard Test Method for Thickness of Textile Materials |
ASTM D 123 : 2019 | Standard Terminology Relating to Textiles |
ASTM D 3774 : 1996 : R2008 : EDT 1 | Standard Test Methods for Width of Textile Fabric |
ASTM D 3775 : 1998 | Standard Test Method for Fabric Count of Woven Fabric |
ASTM D 3776 : 2009 | Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
ASTM D 1059 : 2001 | Standard Test Method for Yarn Number Based on Short-Length Specimens (Withdrawn 2010) |
ASTM D 1776 : 2004 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 1423 : 1999 | Standard Test Method for Twist in Yarns by Direct-Counting |
ASTM D 1777 : 1996 : R2007 | Standard Test Method for Thickness of Textile Materials |
ASTM D 1776 : 2008 : EDT 1 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 3775 : 2002 | Standard Test Method for Fabric Count of Woven Fabric |
ASTM D 1776 : 2008 | Standard Practice for Conditioning and Testing Textiles |
ASTM D 3775 : 2007 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
ASTM D 1423 : 2002 : R2008 | Standard Test Method for Twist in Yarns by Direct-Counting |
ASTM D 3774 : 2018 | Standard Test Method for Width of Textile Fabric |
ASTM D 5035 : 2011 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 3773 : 1990 : R2002 | Standard Test Methods for Length of Woven Fabric |
ASTM D 3775 : 2012 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
ASTM D 3775 : 2003 : REV A | Standard Test Method for Fabric Count of Woven Fabric |
ASTM D 4963 : 1999 | Standard Test Method for Ignition Loss of Glass Strands and Fabrics |
ASTM D 5035 : 2006 : R2008 : EDT 1 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 1059 : 2017 | Standard Test Method for Yarn Number Based on Short-Length Specimens |
ASTM D 3775 : 2007 : REV A | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
ASTM D 3775 : 2017 : EDT 1 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
ASTM D 4963 : 2004 | Standard Test Method for Ignition Loss of Glass Strands and Fabrics |
ASTM D 123 : 2023 | Standard Terminology Relating to Textiles |
ASTM D 3774 : 1996 | Standard Test Methods for Width of Textile Fabric |
ASTM D 3775 : 2017 : R2023 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics |
ASTM D 3775 : 2008 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
ASTM D 3774 : 1996 : R2016 | Standard Test Method for Width of Textile Fabric |
ASTM D 5035 : 2006 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
ASTM D 7018 : 2004 | Standard Terminology Relating to Glass Fiber and Its Products |
ASTM D 3773 : 1990 : R1996 : EDT 1 | Standard Test Methods for Length of Woven Fabric |
ASTM D 5035 : 2011 : R2019 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
ASTM D 3775 : 2003 | Standard Test Method for Fabric Count of Woven Fabric |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.