ASTM D 570 : 2022
Current
Current
The latest, up-to-date edition.
Standard Test Method for Water Absorption of Plastics
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
10-12-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 20
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the determination of the relative rate of absorption of water by plastics when immersed. This test method is intended to apply to the testing of all types of plastics, including cast, hot-molded, and cold-molded resinous products, and both homogeneous and laminated plastics in rod and tube form and in sheets 0.13 mm (0.005 in.) or greater in thickness.
1.2The values given in SI units are to be regarded as standard. The values stated in parentheses are for information only.
Note 1:This test method and ISO 62 are technically equivalent when the test specimen described in 6.2 is used.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 3371 : 2022 | Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications |
| ASTM F 2376 : 2022 | Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems |
| ASTM C 470/C470M : 2015 | Standard Specification for Molds for Forming Concrete Test Cylinders Vertically |
| ASTM C 1822 : 2021 | Standard Specification for Insulating Covers on Accessible Lavatory Piping |
| ASTM F 1837M : 1997 : R2018 | Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
| ASTM C 877 : 2021 | Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections |
| ASTM D 3013 : 2013 : R2021 | Standard Specification for Epoxy Molding Compounds |
| ASTM F 942 : 2018 | Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
| ASTM D 3641 : 2021 | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
| ASTM F 2320 : 2018 | Standard Specification for Rubber Insulating Sheeting |
| ASTM D 1201 : 2013 : R2022 : EDT 1 | Standard Specification for Thermosetting Polyester Molding Compounds |
| ASTM D 4101 : 2017 : EDT 1 | Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
| ASTM F 2902 : 2016 : EDT 1 | Standard Guide for Assessment of Absorbable Polymeric Implants |
| ASTM D 706 : 2020 | Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
| ASTM F 1412 : 2016 | Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
| ASTM F 1742 : 2003 : R2020 | Standard Specification for PVC Insulating Sheeting |
| ASTM F 1901 : 2022 | Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
| ASTM D 2671 : 2021 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| ASTM D 5229/D5229M : 2020 | Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials |
| ASTM D 3105 : 2017 | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| ASTM D 4802 : 2016 | Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
| ASTM F 1673 : 2010 : R2021 : EDT 1 | Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
| ASTM D 229 : 2019 : EDT 1 | Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
| ASTM F 790 : 2018 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| ASTM F 3223 : 2017 | Standard Guide for Characterization and Assessment of Tissue Engineered Medical Products (TEMPs) for Knee Meniscus Surgical Repair and/or Reconstruction |
| ASTM D 1562 : 2022 | Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
| ASTM D 5948 : 2005 : R2020 | Standard Specification for Molding Compounds, Thermosetting |
| ASTM F 602 : 2009 : R2015 | Standard Criteria for Implantable Thermoset Epoxy Plastics (Withdrawn 2024) |
| ASTM D 4000 : 2020 | Standard Classification System for Specifying Plastic Materials |
| ASTM D 4434/D4434M : 2021 | Standard Specification for Poly(Vinyl Chloride) Sheet Roofing |
| ASTM D 7957/D7957M : 2022 | Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement |
| ASTM D 7832/D7832M : 2014 : R2021 | Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces) |
| ASTM D 1051 : 2019 | Standard Specification for Rubber Insulating Sleeves |
| ASTM F 619 : 2020 | Standard Practice for Extraction of Materials Used in Medical Devices |
| ASTM C 877M : 2021 | Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric) |
| ASTM D 2304 : 2018 | Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials |
| ASTM F 712 : 2006 : R2018 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
| ASTM F 665 : 2009 : R2015 | Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application |
| ASTM D 2305 : 2018 | Standard Test Methods for Polymeric Films Used for Electrical Insulation |
| ASTM F 624 : 2009 : R2015 : EDT 1 | Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications |
| ASTM D 7745 : 2019 | Standard Practice for Testing Pultruded Composites |
| ASTM D 3748 : 2014 : R2019 | Standard Practice for Evaluating High-Density Rigid Cellular Plastics |
| ASTM D 705 : 1999 : R2020 | Standard Specification for Urea-Formaldehyde Molding Compounds |
| ASTM F 997 : 2018 | Standard Specification for Polycarbonate Resin for Medical Applications |
| ASTM D 4762 : 2018 | Standard Guide for Testing Polymer Matrix Composite Materials |
| ASTM D 178 : 2019 | Standard Specification for Rubber Insulating Matting |
| ASTM D 3841 : 2021 | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
| ASTM C 881/C881M : 2020 : REV A | Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete |
| ASTM F 2150 : 2019 | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products |
| ASTM D 1050 : 2005 : R2022 | Standard Specification for Rubber Insulating Line Hose |
| ASTM F 3131 : 2014 | Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages |
| ASTM D 707 : 2015 | Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
| ASTM F 641 : 2009 : R2014 | Standard Specification for Implantable Epoxy Electronic Encapsulants |
| ASTM D 704 : 1999 : R2020 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
| ASTM D 619 : 2021 | Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
| ASTM D 1048 : 2022 | Standard Specification for Rubber Insulating Blankets |
| ASTM D 787 : 2018 | Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds |
| ASTM D 5436 : 2015 : R2020 | Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
| ACI SPEC-548.10:2022 | Type Methyl Methacrylate Slurry (MMS) Polymer Overlays for Bridge and Parking Garage Deck— Specification |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.