ASTM D 5681 : 2022 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology for Waste and Waste Management
Hardcopy , PDF
11-09-2023
English
12-05-2022
Committee |
D 34
|
DocumentType |
Reference Material
|
Pages |
18
|
ProductNote |
NOTE—The definition for ‘PFAS’ was editorially updated in December 2022.
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This terminology contains standard definitions of terms used in the general area of waste and waste management. It is intended to promote understanding by providing precise technical definitions of terms used in the standards developed by Committee D34 and its subcommittees.
1.2Terms used only within an individual standard, and having a meaning unique to that standard, may be defined or explained in the terminology section of that individual standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 711 : 2023 : EDT 1 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
ASTM E 777 : 2023 | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel |
ASTM E 829 : 2023 | Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis |
ASTM E 953 : 2023 | Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash |
ASTM D 4646 : 2016 : R2023 | Standard Test Method for 24 h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
ASTM D 7204 : 2023 | Standard Practice for Sampling Waste Streams on Conveyors |
ASTM D 5792 : 2010 : R2015 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM E 777 : 2017 : REV A | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel |
ASTM D 4979 : 2019 | Standard Practice for Physical Description Screening Analysis in Waste |
ASTM D 4981 : 2019 | Standard Practice for Screening of Oxidizers in Waste |
ASTM D 6700 : 2019 | Standard Guide for Use of Scrap Tires as Tire-Derived Fuel |
ASTM E 1109 : 2019 | Standard Test Method for Determining the Bulk Density of Solid Waste Fractions |
ASTM D 6538 : 2012 : R2019 | Standard Guide for Sampling Wastewater With Automatic Samplers |
ASTM D 6009 : 2019 | Standard Guide for Sampling Waste Piles |
ASTM D 5232 : 2019 | Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material |
ASTM D 8018 : 2015 : R2020 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
ASTM D 5058 : 2012 : R2020 | Standard Practices for Compatibility of Screening Analysis of Waste |
ASTM D 3987 : 2012 : R2020 | Standard Practice for Shake Extraction of Solid Waste with Water |
ASTM D 5759 : 2012 : R2020 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
ASTM E 1266 : 2020 | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
ASTM D 7858 : 2013 : R2018 | Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 5283 : 2018 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation |
ASTM D 6323 : 2019 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
ASTM D 4547 : 2020 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
ASTM D 6270 : 2020 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
ASTM D 5658 : 2020 | Standard Practice for Sampling Unconsolidated Waste from Trucks |
ASTM D 7831 : 2020 | Standard Practice for Sampling of Tanks by Field Personnel |
ASTM D 4982 : 2020 | Standard Test Methods for Flammability Potential Screening Analysis of Waste |
ASTM D 5633 : 2021 | Standard Practice for Sampling with a Scoop |
ASTM D 5451 : 2021 | Standard Practice for Sampling Using a Trier Sampler |
ASTM E 790 : 2021 | Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples |
ASTM D 6050 : 2021 | Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste |
ASTM E 2787 : 2021 | Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM E 2838 : 2021 | Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 5495 : 2021 | Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA) |
ASTM E 2866 : 2021 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM E 775 : 2015 : R2021 | Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
ASTM E 778 : 2015 : R2021 | Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
ASTM D 7353 : 2021 | Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump |
ASTM D 5743 : 2021 | Standard Practice for Sampling Single or Multilayered Liquids, with or Without Solids, in Drums or Similar Containers |
ASTM E 702 : 2021 | Standard Specification for Municipal Ferrous Scrap |
ASTM E 887 : 2021 | Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash |
ASTM E 1037 : 2021 | Standard Test Method for Measuring Particle Size Distribution of RDF-5 |
ASTM D 6640 : 2021 | Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
ASTM D 5956 : 2021 | Standard Guide for Sampling Strategies for Heterogeneous Wastes |
ASTM D 6044 : 2021 | Standard Guide for Representative Sampling for Management of Waste and Contaminated Media |
ASTM D 6232 : 2021 | Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
ASTM E 791 : 2008 : R2022 | Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases |
ASTM D 5830 : 2022 | Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography |
ASTM D 6907 : 2022 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
ASTM D 5530 : 2022 | Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry |
ASTM D 5513 : 2022 | Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis |
ASTM D 4646 : 2016 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
ASTM D 4844 : 2016 | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
ASTM D 5057 : 2017 | Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste |
ASTM D 5198 : 2017 | Standard Practice for Nitric Acid Digestion of Solid Waste |
ASTM D 5831 : 2017 | Standard Practice for Screening Fuels in Soils |
ASTM D 6346 : 2017 | Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs |
ASTM D 6661 : 2017 | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
ASTM D 6699 : 2016 | Standard Practice for Sampling Liquids Using Bailers |
ASTM E 829 : 2016 | Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis |
ASTM D 6759 : 2016 | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
ASTM D 6956 : 2017 | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
ASTM D 7204 : 2015 | Standard Practice for Sampling Waste Streams on Conveyors |
ASTM E 953/E953M : 2016 | Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash |
ASTM D 8064 : 2016 | Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams (Withdrawn 2024) |
ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
ASTM D 8187 : 2018 | Standard Guide for Interpretation of Standard Humidity Cell Test Results |
ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
ASTM E 711 : 2023 : EDT 1 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter |
ASTM E 889 : 1982 : R2014 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
ASTM D 4790 : 2020 : REV A | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM D 5746 : 2023 | Standard Classification of Environmental Condition of Property Area Types, Including Explosives Safety for Federally-Owned Real Property |
ASTM D 6051 : 2015 : R2023 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM D 5745 : 2015 | Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation |
ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM D 5746 : 1998 : R2016 | Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities |
ASTM D 4790 : 2023 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
ASTM D 6051 : 2015 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
ASTM D 6008 : 2022 | Standard Practice for Determining the Environmental Condition of Federal Property |
ASTM E 889 : 1982 : R2023 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
ASTM E 711 : 1987 : R2004 | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter (Withdrawn 2004) |
ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 943 : 2023 | Standard Terminology Relating to Biological Effects and Environmental Fate |
ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 943 : 2008 : R2014 | Standard Terminology Relating to Biological Effects and Environmental Fate (Withdrawn 2023) |
ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM D 6008 : 1996 : R2014 | Standard Practice for Conducting Environmental Baseline Surveys |
ASTM D 5745 : 2023 | Standard Guide for Developing and Implementing Interim and Early Actions for Waste Contamination Site Remediation |
ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.