ASTM D 5423 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
Available format(s)
Hardcopy , PDF
Superseded date
06-18-2022
Superseded by
Language(s)
English
Published date
05-12-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers forced-convection ventilated electrically-heated ovens, operating over all or part of the temperature range from 20°C above the ambient temperature to 500°C, and used for thermal endurance evaluation of electrical insulating materials.
| Committee |
D 09
|
| DevelopmentNote |
Supersedes ASTM D 2436 (12/2001)
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers forced-convection ventilated electrically-heated ovens, operating over all or part of the temperature range from 20°C above the ambient temperature to 500°C, and used for thermal endurance evaluation of electrical insulating materials.
1.2The specification requirements for Type I ovens are based on IEC Publication 216-4-1, and are technically identical to it. The requirements for Type II ovens are essentially identical to the requirements of Specification D2436. This specification and an associated test method, D5374, have replaced Specification D2436.
1.3While the ovens covered by this specification are intended primarily for thermal endurance evaluation, they can also be used wherever their characteristics make them suitable for other applications.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 149 : 2009 | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies |
| ASTM D 2293 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3032 : 2016 | Standard Test Methods for Hookup Wire Insulation |
| ASTM D 470 : 2013 | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM D 4566 : 2014 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 3288/D3288M : 2015 | Standard Test Methods for Magnet-Wire Enamels |
| ASTM D 1676 : 2017 | Standard Test Methods for Film-Insulated Magnet Wire |
| ASTM D 5374 : 2013 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 2293 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2851 : 1998 : R2009 | Standard Specification for Liquid Optical Adhesive |
| ASTM D 2303 : 1997 : R2004 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2310 : 2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 1830 : 2017 | Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method |
| ASTM D 2318 : 1998 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 902 : 2012 | Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation (Withdrawn 2020) |
| ASTM D 1932 : 2018 | Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes |
| ASTM D 3353 : 2018 | Standard Test Methods for Fibrous-Insulated Magnet Wire |
| C22.2 NO. 214-17 | Communications cables (Bi-national standard, with UL 444) |
| ASTM D 2308 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2300 : 2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2293 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 7894/D7894M : 2014 | Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems |
| ASTM D 3288/D3288M : 2015 : REDLINE | Standard Test Methods for Magnet-Wire Enamels |
| ASTM D 1830 : 2017 : REDLINE | Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method |
| CSA C22.2 No. 0.17 : 2000 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| ASTM D 4559 : 1999 : R2010 | Standard Test Method for Volatile Matter in Silicone Fluid |
| ASTM D 4559 : 1999 | Standard Test Method for Volatile Matter in Silicone Fluid |
| ASTM D 3312 : 2004 : R2013 | Standard Test Method for Percent Reactive Monomer in Solventless Varnishes |
| ASTM D 4559 : 1999 : R2018 | Standard Test Method for Volatile Matter in Silicone Fluid (Withdrawn 2022) |
| ASTM D 3032 : 2016 : REDLINE | Standard Test Methods for Hookup Wire Insulation |
| ASTM D 2756 : 2007 : R2012 | Standard Test Method for Weight Loss of Electrical Insulating Varnishes |
| ASTM D 3377 : 2004 | Standard Test Method for Weight Loss of Solventless Varnishes |
| ASTM D 2852 : 1995 : R2008 | Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings |
| ASTM D 4566 : 2014 : REDLINE | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| SAE J 2192 : 2016 | RECOMMENDED TESTING METHODS FOR PHYSICAL PROTECTION OF WIRING HARNESSES |
| ASTM D 2756 : 2007 | Standard Test Method for Weight Loss of Electrical Insulating Varnishes |
| ASTM D 2854 : 1996 : R2004 | Standard Test Method for Apparent Density of Activated Carbon |
| CSA C22.2 No. 0.17 : 2000 : R2013 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| ASTM D 2318 : 1998 : R2003 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2303 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2307 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2293 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2300 : 2008 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3312 : 2004 : R2009 | Standard Test Method for Percent Reactive Monomer in Solventless Varnishes |
| ASTM D 2296 : 2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2295 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| GR 2949 CORE : ISSUE 1 | GENERIC REQUIREMENTS FOR BURIED HYBRID COAXIAL/TWISTED PAIR CABLE |
| SAE J 1128 : 2015 | LOW VOLTAGE PRIMARY CABLE |
| ASTM D 2852 : 1995 : R2002 | Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings |
| ASTM D 2307 : 2007 : REV A | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
| ASTM D 4559 : 1999 : R2004 | Standard Test Method for Volatile Matter in Silicone Fluid |
| ASTM D 3353 : 2018 : REDLINE | Standard Test Methods for Fibrous-Insulated Magnet Wire |
| ASTM D 350 : 2013 : REDLINE | Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation |
| ASTM D 902 : 2012 : REDLINE | Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
| CSA C22.2 No. 198.3 : 2005 : R2014 | COATED ELECTRICAL SLEEVING |
| CSA C22.2 No. 198.3 : 2005 : R2010 | COATED ELECTRICAL SLEEVING |
| ASTM D 2296 : 2001 : R2006 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA C22.2 No. 198.1 : 2006 : R2015 | EXTRUDED INSULATING TUBING |
| ASTM D 2308 : 2007 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| CSA C22.2 No. 0.17 : 2000 : R2004 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| ASTM D 7895/D7895M : 2014 | Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems |
| ASTM D 3377 : 2004 : R2009 | Standard Test Method for Weight Loss of Solventless Varnishes |
| DWA-M 612:2018 | TEST METHODS OF SAMPLING AND TESTING PULPS TO BE USED IN THE MANUFACTURE OF ELECTRICAL INSULATION |
| ASTM D 2288 : 1997 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| C22.2 NO. 188-18 | Splicing wire connectors (Trinational standard with UL 486C and NXM-J- 548-ANCE) |
| ASTM D 2295 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2301 : 2010 : R2017 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2288 : 1997 : R2001 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2318 : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| IEEE 98-2002 | IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials |
| ICEA S 89 648 : 2011 | AERIAL SERVICE WIRE TECHNICAL REQUIREMENTS |
| ASTM D 2633 : 2013-03 | TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE |
| ASTM D 149 : 2009 : R2013 | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies |
| CSA C22.2 No. 198.1 : 2006 | EXTRUDED INSULATING TUBING |
| ASTM D 5374 : 2013 : REDLINE | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| UL 444:5ED 2017-01-20 | Communications Cables |
| CSA C22.2 No. 198.3:2005 | COATED ELECTRICAL SLEEVING |
| CSA C22.2 No. 227.2.1 : 2014 | LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT |
| ASTM D 69 : 2019 | Standard Test Methods for Friction Tapes |
| ASTM D 149 : 2020 | Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies |
| ASTM D 7895/D7895M : 2019 | Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems |
| ASTM D 7894/D7894M : 2019 | Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems |
| ASTM D 1932 : 2019 | Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes |
| ASTM B 987/B987M : 2020 | Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors |
| ASTM D 6053 : 2014 : R2018 | Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes |
| ASTM D 2304 : 2018 | Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials |
| ASTM D 3145 : 2020 | Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by Helical Coil Method |
| ASTM D 3288/D3288M : 2020 | Standard Test Methods for Magnet-Wire Enamels |
| ASTM D 4568 : 2013 : R2020 | Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Wire and Cable Materials |
| ASTM D 4566 : 2020 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 350 : 2021 | Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation |
| ASTM D 470 : 2021 | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM D 2633 : 2021 | Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM D 3032 : 2021 : REV A | Standard Test Methods for Hookup Wire Insulation |
| ASTM D 2307 : 2021 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
| ASTM D 5374 : 2022 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 2295 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 115 : 2017 | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| ASTM D 2319/D2319M : 1998 : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 115 : 2017 : REDLINE | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| ASTM D 2307 : 2007 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| SAE J 1678 : 2015 | LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
| CSA C22.2 No. 250.13 : 2017 | LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS |
| ASTM D 4559 : 1999 : EDT 1 | Standard Test Method for Volatile Matter in Silicone Fluid |
| ASTM D 3377 : 2004 : R2013 | Standard Test Method for Weight Loss of Solventless Varnishes |
| ASTM D 3377 : 2004 : R2018 | Standard Test Method for Weight Loss of Solventless Varnishes |
| ASTM D 2307 : 2007 | Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire |
| ASTM D 69 : 2012 : REDLINE | Standard Test Methods for Friction Tapes |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| CSA C22.2 No. 227.3 : 2015 | MECHANICAL PROTECTION TUBING (MPT) AND FITTINGS |
| ASTM D 2633 : 2013 : REV A | Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM B 987/B987M : 2017 : EDT 1 | Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors |
| ASTM D 350 : 2013 | Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation |
| ASTM D 3145 : 2018 | Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method |
| ASTM D 69 : 2012 | Standard Test Methods for Friction Tapes |
| ASTM D 4568 : 2013 | Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials |
| ASTM D 2319/D2319M : 1998 : R2008e1 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| SAE J 156 : 2016 | FUSIBLE LINKS |
| ASTM D 3312 : 2004 | Standard Test Method for Percent Reactive Monomer in Solventless Varnishes |
| ASTM D 2307 : 2007A | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3288 : 2003 | Standard Test Methods for Magnet-Wire Enamels |
| ASTM D 1676 : 2017 : REDLINE | Standard Test Methods for Film-Insulated Magnet Wire |
| ASTM D 2307 : 2007A : R2013 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2294 : 1996 : R2008 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2294 : 1996 : R2016 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2304 : 2010-10 | TEST METHOD FOR THERMAL ENDURANCE OF RIGID ELECTRICAL INSULATING MATERIALS |
| ASTM D 2310 : 2006 : R2012 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 2301 : 2010 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| ASTM D 3312 : 2018 | Standard Test Method for Percent Reactive Monomer in Solventless Varnishes |
| ASTM D 2294 : 1996 : R2002 | TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING |
| SAE J 1127 : 2015 | LOW VOLTAGE BATTERY CABLE |
| CSA C22.2 No. 2556 : 2015 | WIRE AND CABLE TEST METHODS |
| ASTM D 4568 : 2013 : REDLINE | Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials |
| ASTM D 2756 : 2007 : R2017 | Standard Test Method for Weight Loss of Electrical Insulating Varnishes |
| ASTM D 470 : 2013 : REDLINE | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| CSA C22.2 No. 65 : 2013 | WIRE CONNECTORS |
| ASTM D 5374 : 2022 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 5374 : 2013 : REDLINE | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 5374 : 2013 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| IEC 60216-4-1:2006 | Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens |
| ASTM D 5374 : 1993 : R2005 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 5374 : 1993 : R1999 | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.