ASTM D 5329 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
Hardcopy , PDF
06-13-2020
English
07-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 04
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover tests for hot-applied types of joint and crack sealants and fillers for portland cement concrete and asphaltic concrete pavements. There are numerous standard material specifications that use these test methods. Refer to the respective standard material specification of interest to determine which of the following test methods to use. For sample melting and concrete block preparation see their respective standard practices.
1.2The test methods appear in the following sections:
| Section | |
| Artificial Weathering | 13 |
| Asphalt Compatibility | 12 |
| Bond, Non-Immersed | 8 |
| Bond, Water-Immersed | 9 |
| Cone Penetration, Non-Immersed | 6 |
| Flexibility | 15 |
| Flow | 7 |
| Resilience | 10 |
| Resilience, Oven-Aged | 11 |
| Tensile Adhesion | 14 |
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4383 : 2018 | Standard Specification for Plowable, Raised Retroreflective Pavement Markers |
| ASTM D 6114/D6114M : 2019 | Standard Specification for Asphalt-Rubber Binder |
| ASTM D 6690 : 2015 | Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements |
| ASTM D 5893/D5893M : 2016 | Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements |
| ASTM D 7116 : 2016 | Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements |
| ASTM D 5078/D5078M : 2011 : R2016 | Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements |
| ASTM D 6297 : 2013 | Standard Specification for Asphaltic Plug Joints for Bridges |
| ASTM D 4280 : 2018 | Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers |
| ASTM D 6690 : 2006 : REV A | Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements |
| ASTM D 3381 : 2005 | Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction |
| ASTM D 1985 : 1991 : R1997 | Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks |
| ASTM D 6690 : 2007 | Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements |
| ASTM D 5167 : 2013 : R2018 | Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation |
| ASTM D 5167 : 2013 | Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation |
| ASTM D 1074 : 2017 | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| ASTM D 1561 : 1992 : R2005 : EDT 1 | Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
| ASTM D 1074 : 1996 | Standard Test Method for Compressive Strength of Bituminous Mixtures |
| ASTM D 5167 : 2003 | Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation |
| ASTM D 1074 : 2009 | Standard Test Method for Compressive Strength of Bituminous Mixtures |
| ASTM D 1985 : 2013 : R2019 | Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks |
| ASTM D 6690 : 2006 | Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements |
| ASTM D 5167 : 2010 | Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation |
| ASTM D 3381 : 2009 | Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction |
| ASTM D 1985 : 2003 | Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks |
| ASTM D 6690 : 2015 | Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements |
| ASTM D 1561 : 1992 : R2000 | Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
| ASTM D 6690 : 2012 | Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements |
| ASTM D 1074 : 2002 | Standard Test Method for Compressive Strength of Bituminous Mixtures |
| ASTM D 3381 : 1992 : R1999 | Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction |
| ASTM D 5167 : 1991 : R1997 | Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation |
| ASTM D 1561 : 1992 : R2005 | Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor |
| ASTM D 1985 : 2003 : R2008 | Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks |
| ASTM D 6690 : 2001 | Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements |
| ASTM D 1985 : 2013 | Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.