ASTM D 5274 : 2000 : R2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Analysis of 1,3–Butadiene Product
Available format(s)
Hardcopy , PDF
Superseded date
12-16-2019
Superseded by
Language(s)
English
Published date
07-24-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Referenced documents
3 Terminology
4 Significance and use
5 Sampling
6 Composition and test methods
7 Keywords
CONTAINED IN VOL. 05.02, 2015 Describes the analysis of 1,3-butadiene products produced in North America. It includes possible components and test methods, both ASTM and other, either actually used or believed to be in use, to test for these components.
| Committee |
D 02
|
| DocumentType |
Guide
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2014
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide covers the analysis of 1,3–butadiene products produced in North America. It includes possible components and test methods, both ASTM and other, either actually used or believed to be in use, to test for these components. This guide is not intended to be used or construed as a set of specifications for butadiene products.
1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 3246 : 2011 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D 5799 : 1995 : R2000 : EDT 1 | Standard Test Method for Determination of Peroxides in Butadiene |
| ASTM D 1025 : 2000 : R2004 | Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene |
| ASTM D 1025 : 1996 | Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene |
| ASTM D 2426 : 1993 : R1998 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 4423 : 2010 : R2015 | Standard Test Method for Determination of Carbonyls in C<inf>4</inf> Hydrocarbons |
| ASTM D 4629 : 2002 : R2007 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 3700 : 2001 | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 2384 : 1983 : R2000 : EDT 1 | Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures |
| ASTM D 3700 : 2016 : REDLINE | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 3246 : 2014 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D 1157 : 1991 : R2000 : EDT 1 | Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons |
| ASTM D 4423 : 2010 | Standard Test Method for Determination of Carbonyls In C<inf>4</inf> Hydrocarbons |
| ASTM D 2593 : 1993 : R1998 | Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography |
| ASTM D 3700 : 2014 | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 4468 : 1985 : R2015 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry |
| ASTM D 4468 : 1985 : R2000 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D 5799 : 1995 | Standard Test Method for Determination of Peroxides in Butadiene |
| ASTM D 5799 : 1995 : R2014 | Standard Test Method for Determination of Peroxides in Butadiene |
| ASTM D 4629 : 2009 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 4423 : 2000 : R2006 | Standard Test Method for Determination of Carbonyls In C<inf>4</inf> Hydrocarbons |
| ASTM D 3700 : 1994 | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 4629 : 1996 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 2593 : 1993 : R2014 | Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography |
| ASTM D 4178 : 1982 : R2012 | Standard Practice for Calibrating Moisture Analyzers |
| ASTM D 1025 : 2010 | Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene |
| ASTM D 4423 : 1991 : R1996 | Standard Test Method for Determination of Carbonyls In C<sub>4</sub> Hydrocarbons |
| ASTM D 4864 : 2014 | Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography (Withdrawn 2016) |
| ASTM D 1550 : 1994 : R2009 | Standard ASTM Butadiene Measurement Tables |
| ASTM D 3246 : 1981 : R1987 : EDT 1 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D 4423 : 2000 | Standard Test Method for Determination of Carbonyls In C<sub>4</sub> Hydrocarbons |
| ASTM D 2384 : 1983 : R2009 | Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures |
| ASTM D 5799 : 1995 : R2004 | Standard Test Method for Determination of Peroxides in Butadiene |
| ASTM D 1025 : 2000 | Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene |
| ASTM D 1550 : 1994 : R2000 | Standard ASTM Butadiene Measurement Tables |
| ASTM D 2384 : 1983 | TEST METHODS FOR TRACES OF VOLATILE CHLORIDES IN BUTANE-BUTENE MIXTURES |
| ASTM D 2426 : 1993 : R2009 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 4178 : 1982 : R2005 | Standard Practice for Calibrating Moisture Analyzers |
| ASTM D 1157 : 1991 : R2014 | Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons |
| ASTM D 2426 : 1993 : R2014 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 1550 : 1994 : R2015 | Standard ASTM Butadiene Measurement Tables |
| ASTM D 4629 : 2002 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 1157 : 1991 : R2004 | Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons |
| ASTM D 4864 : 1990 : R2005 | Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography |
| ASTM D 4864 : 1990 : R2000 : EDT 1 | Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography |
| ASTM D 3700 : 2012 | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 4629 : 2017 | Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 2384 : 1983 : R2004 | Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures |
| ASTM D 4629 : 2012 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 3700 : 2007 | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 3246 : 2015 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry (Withdrawn 2024) |
| ASTM D 2384 : 1983 : R2014 | Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures |
| ASTM D 4629 : 2012 : R2017 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 4468 : 1985 : R2011 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<br> Rateometric Colorimetry |
| ASTM D 2593 : 1993 : R2004 : EDT 1 | Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography |
| ASTM D 4468 : 1985 : R2006 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D 4864 : 1990 : R2013 | Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography |
| ASTM D 1025 : 2010 : R2015 : EDT 1 | Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene |
| ASTM D 4629 : 2008 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 4629 : 2010 | Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection |
| ASTM D 3246 : 2015 : REDLINE | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D 1550 : 2018 | Standard ASTM Butadiene Measurement Tables |
| ASTM D 3700 : 2016 | Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 1550 : 1994 : R2005 | Standard ASTM Butadiene Measurement Tables |
| ASTM D 4178 : 1982 : R1999 | Standard Practice for Calibrating Moisture Analyzers |
| ASTM D 3246 : 2005 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D 5799 : 1995 : R2009 | Standard Test Method for Determination of Peroxides in Butadiene |
| ASTM D 4178 : 1982 : R2017 | Standard Practice for Calibrating Moisture Analyzers |
| ASTM D 3246 : 1992 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D 3246 : 1996 | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D 2426 : 1993 : R2004 : EDT 1 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography |
| ASTM D 1157 : 1991 : R2009 | Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons |
| ASTM D 2593 : 1993 : R2009 | Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.