ASTM D 5211 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Xylenes for p-Xylene Feedstock
Hardcopy , PDF
11-14-2024
English
11-01-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 16
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers xylenes for p-xylene feedstock. These xylenes typically are extracted from reformate.
1.2The following applies to all specified limits in this specification: for purposes of determining conformance with this specification, an observed value or calculated value shall be rounded off “to the nearest unit” in the last right hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.4Consult current OSHA regulations, suppliers’ Safety Data Sheets (SDS), and local regulations for all materials used in this specification.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 7504 : 2018 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 5917 : 2015 : R2019 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 5194 : 2024 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 8005 : 2018 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 7184 : 2020 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM E 2680 : 2016 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
| ASTM D 7183 : 2023 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 5194 : 2024 : REV A | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 2680 : 2023 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
| ASTM D 7457 : 2012 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Withdrawn 2019) |
| ASTM D 7183 : 2018 : REV A : EDT 1 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 7184 : 2015 : R2019 : EDT 1 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM D 7359 : 2023 | Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
| ASTM D 7504 : 2020 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 5917 : 1999 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 850 : 2018 : EDT 1 | Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials |
| ASTM D 3437 : 2015 : R2022 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 7504 : 2023 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 5808 : 2023 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
| ASTM D 5194 : 2018 | Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
| ASTM D 5386 : 2024 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 8005 : 2023 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 7359 : 2018 | Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC) |
| ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 7184 : 2019 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM D 5917 : 2024 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 850 : 2002 | Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials |
| ASTM D 5386 : 2016 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 7183 : 2018 : REV A : R2023 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 7184 : 2024 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM D 7504 : 2021 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 5808 : 2020 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
| ASTM D 850 : 2021 | Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.