ASTM D 5194 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
Hardcopy , PDF
07-25-2024
English
01-30-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method covers the determination of total chloride (organic and inorganic) in liquid aromatic hydrocarbons and cyclohexane.
| Committee |
D 16
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of total chloride (organic and inorganic) in liquid aromatic hydrocarbons and cyclohexane.
1.2The test method is applicable to samples with chloride concentrations of 1 to 25 mg/kg.
1.3Bromides and iodides, if present, will be calculated as chlorides.
1.4Materials, such as styrene, that are polymerized by sodium biphenyl reagent cannot be analyzed by this test method.
1.5In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.
1.6The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see Section 7.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3193 : 2019 | Standard Specification for Ethylbenzene |
| ASTM D 7185 : 2017 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
| ASTM D 5808 : 2018 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
| ASTM D 2359 : 2018 : REV A | Standard Specification for Refined Benzene-535 |
| ASTM D 7457 : 2012 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Withdrawn 2019) |
| ASTM D 5211 : 2017 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
| ASTM D 5808 : 2023 | Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry |
| ASTM D 2359 : 2019 | Standard Specification for Refined Benzene-535 |
| ASTM D 7185 : 2019 | Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene |
| ASTM D 7124 : 2019 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
| ASTM D 5211 : 2019 | Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock |
| ASTM D 1555M : 2008 : EDT 1 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 6809 : 2002 : R2016 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 6809 : 2020 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 4052 : 1996 : R2002 : EDT 1 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 1555M : 2004 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 3437 : 1999 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3505 : 1996 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 4052 : 2009 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1555M : 2000 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metric] |
| ASTM D 3437 : 2010 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 1555M : 2004 : EDT 1 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 3505 : 2012 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 3505 : 1996 : R2006 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 4052 : 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 3437 : 2015 : R2022 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 4052 : 2016 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1555M : 2016 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 6809 : 2002 : R2012 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 3505 : 2018 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023) |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 3437 : 2011 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 3437 : 2008 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3437 : 2003 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 6809 : 2002 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 1555M : 2004 : REV A | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 4052 : 2022 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 6809 : 2002 : R2007 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 4052 : 2015 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 3505 : 1996 : R2000 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 1555M : 2022 | Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric] |
| ASTM D 4052 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 3505 : 2012 : EDT 1 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.