ASTM D 5139 : 2019
Current
The latest, up-to-date edition.
Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
Hardcopy , PDF
English
06-01-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification defines the size, composition, surface preparation, and coating application variables for preparing samples for evaluating coatings and linings over various substrates.
| Committee |
D 33
|
| DocumentType |
Standard
|
| Pages |
4
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ACI Cement and Concrete Terminology, ANSI N5.12, C33/C33M.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification defines the size, composition, surface preparation, and coating application variables for preparing samples for evaluating coatings and linings over various substrates.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Standards | Relationship |
| ACI 308 : 92(R1997) | Endorsement |
| ASTM D 5144 : 2008 : R2016 | Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
| ASTM D 8157 : 2019 | Standard Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants |
| ASTM D 3911 : 2016 | Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions |
| ASTM D 8104 : 2017 | Standard Guide for Determining Coating Qualification Test Data Applicability |
| ASTM D 6943 : 2015 | Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings |
| ASTM D 7230 : 2006 : R2013 | Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates |
| ASTM D 4082 : 2010 : R2017 | Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants |
| ASTM D 3912 : 2010 : R2017 | Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants |
| ASTM C 150/C150M : 2024 | Standard Specification for Portland Cement |
| ASTM C 33/C33M : 2023 | Standard Specification for Concrete Aggregates |
| ASTM C 494/C494M : 2019 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 494/C494M : 2019 : EDT 1 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM D 7234 : 2005 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4541 : 2009 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4538 : 2005 : EDT 1 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4538 : 2005 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM C 33/C33M : 2018 | Standard Specification for Concrete Aggregates |
| ASTM D 3912 : 2010 | Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants |
| ASTM C 192/C192M : 2000 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM D 4260 : 2005 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM D 4260 : 2023 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM D 7234 : 2019 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4538 : 2015 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4541 : 2009 : EDT 1 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM C 192/C192M : 2024 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM C 33/C33M : 2024 | Standard Specification for Concrete Aggregates |
| ASTM C 618 : 2023 : EDT 1 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM D 4259 : 1988 : R2006 | Standard Practice for Abrading Concrete |
| ASTM D 4258 : 2005 : R2017 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 4541 : 2002 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM C 150/C150M : 2021 | Standard Specification for Portland Cement |
| ASTM D 7234 : 2012 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4260 : 1988 : R1999 | Standard Practice for Acid Etching Concrete |
| ASTM D 4259 : 2018 | Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application |
| ASTM D 4541 : 2017 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4541 : 2022 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM C 618 : 2022 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM D 4259 : 1988 : R2012 | Standard Practice for Abrading Concrete |
| ASTM D 4258 : 2023 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM C 618 : 2023 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM D 3912 : 1995 | Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants |
| ASTM D 4258 : 2005 : R2012 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 4538 : 2021 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4538 : 2013 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 3912 : 2010 : R2023 | Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants |
| ASTM D 4259 : 1988 : R1999 | Standard Practice for Abrading Concrete |
| ASTM D 4260 : 2005 : R2017 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
| ASTM C 494/C494M : 2010 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM D 4258 : 1983 : R1999 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM C 192/C192M : 2019 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM A 36/A36M : 2019 | Standard Specification for Carbon Structural Steel |
| ASTM C 618 : 2019 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM D 7234 : 2021 | Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 3912 : 1980 : R1989 | Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants |
| ASTM C 494/C494M : 2024 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 150/C150M : 2020 | Standard Specification for Portland Cement |
| ASTM D 4538 : 1995 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4258 : 2005 | Standard Practice for Surface Cleaning Concrete for Coating |
| ASTM D 7234 : 2022 | Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| ASTM D 4541 : 1995 : EDT 1 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM C 150/C150M : 2022 | Standard Specification for Portland Cement |
| ASTM D 3912 : 2010 : R2017 | Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants |
| ASTM D 4260 : 2005 : R2012 | Standard Practice for Liquid and Gelled Acid Etching of Concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.