ASTM D 5035 : 2011 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
Hardcopy , PDF
07-23-2019
English
07-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 07.02, 2015 Defines raveled strip and cut strip test procedures for determining the breaking force and elongation of most textile fabrics.
| Committee |
D 13
|
| DocumentType |
Test Method
|
| Pages |
8
|
| ProductNote |
Reconfirmed 2015
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers raveled strip and cut strip test procedures for determining the breaking force and elongation of most textile fabrics. Provision is made for wet testing.
1.1.1The raveled strip test is applicable to woven fabrics while the cut strip test is applicable to nonwoven fabrics, felted fabrics, and dipped or coated fabrics.
1.2This test method is not recommended for knitted fabrics or for other textile fabrics which have high stretch (more than 11 %).
Note 1:For the determination of the breaking force and elongation of textile fabrics using the grab test and modified grab test procedures, refer to Test Method D5034.
Note 2:For determination of the breaking force and elongation of some specific types of fabrics which use the strip test, refer to Specifications D579 and D580.
1.3This test method shows the values in both inch-pound units and SI units. Inch-pound units is the technically correct name for the customary units used in the United States. SI units is the technically correct name for the system of metric units known as the International System of Units. The values stated in either acceptable metric units or in other units shall be regarded separately as standard. The values expressed in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining in any way.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6674 : 2001 : R2017 | Standard Guide for Proficiency Test Program for Fabrics |
| ASTM D 5970/D5970M : 2016 | Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure |
| ASTM D 580/D580M : 2015 | Standard Specification for Greige Woven Glass Tapes and Webbings |
| ASTM F 2903 : 2011 | Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair (Withdrawn 2020) |
| ASTM D 579/D579M : 2015 | Standard Specification for Greige Woven Glass Fabrics |
| ASTM D 6207 : 2003 : R2019 | Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature |
| ASTM F 2669 : 2012 : R2018 | Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides (Withdrawn 2023) |
| ASTM D 4157 : 2013 : R2017 | Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) |
| ASTM C 1695 : 2019 | Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service |
| ASTM D 4830/D4830M : 1998 : R2014 : EDT 1 | Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing |
| ASTM D 3107 : 2007 : R2019 | Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns |
| ASTM D 6479 : 2015 | Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints |
| ASTM D 4029/D4029M : 2016 | Standard Specification for Finished Woven Glass Fabrics |
| ASTM D 4355/D4355M : 2014 : R2018 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus |
| ASTM D 4028/D4028M : 2013 | Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn |
| ASTM D 4886 : 2018 | Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method) |
| ASTM D 5726 : 1998 : R2013 | Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing |
| ASTM D 4594/D4594M : 1996 : R2015 : EDT 1 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
| ASTM D 5034 : 2009 : R2017 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 5665/D5665M : 1999 : REV A : R2014 : EDT 1 | Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing |
| ASTM F 2896 : 2011 : R2017 | Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids |
| ASTM D 6614 : 2007 : R2015 | Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method |
| ASTM D 3884 : 2009 : R2017 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ASTM D 4158 : 2008 : R2016 | Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion) |
| ASTM D 580 : 2004 | Standard Specification for Greige Woven Glass Tapes and Webbings |
| ASTM D 76 : 1999 | Standard Specification for Tensile Testing Machines for Textiles |
| ASTM D 629 : 2015 : REDLINE | Standard Test Methods for Quantitative Analysis of Textiles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.