ASTM D 4687 : 2014 : R2022
Current
The latest, up-to-date edition.
Standard Guide for General Planning of Waste Sampling
Hardcopy , PDF
English
05-06-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 34
|
| DocumentType |
Guide
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide provides information for formulating and planning the many aspects of waste sampling (see 1.2) that are common to most waste sampling situations.
1.2The aspects of sampling that this guide addresses are as follows:
| Section | |
| Safety plans | 4 |
| Sampling plans | 5 |
| Quality assurance considerations | 6 |
| General sampling considerations | 7 |
| Preservation and containerization | 8 |
| Cleaning equipment | 9 |
| Packaging, labeling, and shipping procedures | 10 |
| Chain-of-custody procedure | 11 |
1.3This guide does not provide comprehensive sampling procedures for these aspects, nor does it serve as a guide to any specific application. It is the responsibility of the user to ensure that the procedures used are proper and adequate.
1.4Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For more specific precautionary statements see 3.2, 3.3, and Section 4.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6907 : 2005 : R2016 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
| ASTM D 5358 : 1993 : R2019 | Standard Practice for Sampling With a Dipper or Pond Sampler |
| ASTM D 6538 : 2012 : R2019 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 5013 : 2018 | Standard Practices for Sampling Wastes from Pipes and Other Point Discharges |
| ASTM D 6009 : 2019 | Standard Guide for Sampling Waste Piles |
| ASTM D 6063 : 2011 : R2018 | Standard Guide for Sampling of Drums and Similar Containers by Field Personnel |
| ASTM D 4547 : 2020 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
| ASTM D 5658 : 2020 | Standard Practice for Sampling Unconsolidated Waste from Trucks |
| ASTM D 7831 : 2020 | Standard Practice for Sampling of Tanks by Field Personnel |
| ASTM D 5633 : 2021 | Standard Practice for Sampling with a Scoop |
| ASTM D 5451 : 2021 | Standard Practice for Sampling Using a Trier Sampler |
| ASTM D 5495 : 2021 | Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA) |
| ASTM D 7353 : 2021 | Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump |
| ASTM D 5743 : 2021 | Standard Practice for Sampling Single or Multilayered Liquids, with or Without Solids, in Drums or Similar Containers |
| ASTM D 6640 : 2021 | Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
| ASTM D 6232 : 2021 | Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
| ASTM D 5830 : 2022 | Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography |
| ASTM D 4844 : 2016 | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
| ASTM D 5679 : 2016 | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
| ASTM D 6051 : 2015 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
| ASTM D 6661 : 2017 | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
| ASTM D 6699 : 2016 | Standard Practice for Sampling Liquids Using Bailers |
| ASTM D 6759 : 2016 | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
| ASTM D 6956 : 2017 | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
| ASTM D 7204 : 2015 | Standard Practice for Sampling Waste Streams on Conveyors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.