ASTM D 4354 : 1999 : R2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Sampling of Geosynthetics for Testing
Hardcopy , PDF
11-11-2014
English
11-01-2004
Committee |
D 35
|
DocumentType |
Standard Practice
|
Pages |
3
|
ProductNote |
Reconfirmed 2004
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This practice covers three procedures for the sampling of geosynthetics for testing. This practice requires that instructions on taking laboratory samples and test specimens be part of every test method for geosynthetics.
1.1.1 The first procedure describes the sampling of production units for the purpose of manufacturer's quality control (MQC) ().
1.1.2 The second procedure describes the sampling of production units for the purpose of manufacturer's quality assurance (MQA) testing during the manufacturing process. This requires that backup statistical process control records be maintained during the manufacturing process ().
1.1.3 The third procedure describes the division of shipments of geosynthetics into lots and the determination of lot sample size for purchaser's specification conformance testing ().
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1 | Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites |
ASTM D 6637/D6637M : 2015 | Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method |
ASTM D 4751 : 2016 | Standard Test Methods for Determining Apparent Opening Size of a Geotextile |
ASTM D 6636 : 2001 : R2018 | Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes |
ASTM D 6638 : 2018 | Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks) |
ASTM D 7003/D7003M : 2003 : R2013 : EDT 1 | Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes |
ASTM D 6574/D6574M : 2013 : EDT 1 | Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow |
ASTM D 7001 : 2006 : R2011 | Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications |
ASTM D 6706 : 2001 : R2013 | Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil |
ASTM D 5994/D5994M : 2010 : R2015 : EDT 1 | Standard Test Method for Measuring Core Thickness of Textured Geomembranes |
ASTM D 7931 : 2018 | Standard Guide for Specifying Drainage Geocomposites |
ASTM D 7275 : 2007 : R2018 | Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs) |
ASTM D 2643/D2643M : 2008 : R2019 | Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type) |
ASTM D 6566 : 2018 | Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats |
ASTM D 6241 : 2014 | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
ASTM D 4830/D4830M : 1998 : R2014 : EDT 1 | Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing |
ASTM D 7179 : 2018 | Standard Test Method for Determining Geonet Breaking Force |
ASTM D 4632/D4632M : 2015 : REV A | Standard Test Method for Grab Breaking Load and Elongation of Geotextiles |
ASTM E 2777 : 2014 | Standard Guide for Vegetative (Green) Roof Systems |
ASTM D 7004/D7004M : 2003 : R2013 : EDT 1 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
ASTM D 1987 : 2018 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
ASTM D 6461/D6461M : 2018 | Standard Specifications for Silt Fence Materials |
ASTM D 6685 : 2001 : R2015 | Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC) (Withdrawn 2024) |
ASTM D 7274 : 2006 : REV A : R2018 : EDT 1 | Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs) |
ASTM D 4716/D4716M : 2014 | Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 7499/D7499M : 2009 : R2014 | Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness |
ASTM D 4833/D4833M : 2007 : R2013 : EDT 1 | Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products |
ASTM D 6244 : 2006 : R2018 | Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
ASTM D 6524/D6524M : 2016 | Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs) |
ASTM D 6916 : 2018 | Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks) |
ASTM D 5141 : 2011 : R2018 | Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device |
ASTM D 7005/D7005M : 2016 | Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites |
ASTM D 5262 : 2007 : R2016 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
ASTM D 5199 : 2012 : R2019 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 7737/D7737M : 2015 | Standard Test Method for Individual Geogrid Junction Strength |
ASTM D 7498/D7498M : 2009 : R2014 : EDT 1 | Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test |
ASTM D 5884/D5884M : 2004 : REV A : R2015 : EDT 1 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
ASTM D 6072/D6072M : 2019 | Standard Practice for Obtaining Samples of Geosynthetic Clay Liners |
ASTM D 7748/D7748M : 2014 : EDT 1 | Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products |
ASTM D 4759 : 2011 : R2018 | Standard Practice for Determining the Specification Conformance of Geosynthetics |
ASTM D 6567 : 2018 | Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP) |
ASTM D 7701 : 2011 | Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag (Withdrawn 2020) |
ASTM D 6364 : 2006 : R2018 | Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics |
ASTM D 4886 : 2018 | Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method) |
ASTM D 5494 : 1993 : R2018 | Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
ASTM D 4594/D4594M : 1996 : R2015 : EDT 1 | Standard Test Method for Effects of Temperature on Stability of Geotextiles |
ASTM D 6575/D6575M : 2016 | Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs) |
ASTM D 8102 : 2017 | Standard Practice for Manufacturing Quality Control of Geotextiles |
ASTM D 7880/D7880M : 2013 | Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022) |
ASTM D 5493 : 2006 : R2016 | Standard Test Method for Permittivity of Geotextiles Under Load |
ASTM D 5321/D5321M : 2019 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
ASTM D 6525/D6525M : 2018 | Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products |
ASTM D 7322/D7322M : 2017 | Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions |
ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
ASTM D 7864/D7864M : 2015 | Standard Test Method for Determining the Aperture Stability Modulus of Geogrids |
ASTM D 6475 : 2017 | Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
ASTM D 4873/D4873M : 2017 | Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples |
ASTM D 6454/D6454M : 1999 : R2016 : EDT 1 | Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs) |
ASTM D 4533/D4533M : 2015 | Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 8203 : 2018 | Standard Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device |
ASTM D 6455 : 2011 : R2018 | Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs) |
ASTM D 5397 : 2019 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
ASTM D 6767 : 2016 | Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test |
ASTM D 6918 : 2009 : R2014 : EDT 1 | Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.